Clifford Cx-427 Manual de usuario

[ The science of security ]

[ User guide ]

CLIFFORDCLIFFORD

S e c u r i t y s y s t e m a n d c o n v e n i e n c e

11CX

427 series

11CX

427 series

Limited Consumer Warranty

For a period of one calendar year from the date of purchase of this device,

Directed Electronics, Inc. promises to the ORIGINAL PURCHASER to repair or

replace (with a comparable reconditioned model), free of cost, any electronic con-

trol module which proves to be defective in workmanship or material under nor-

mal use, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A

PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYS-

TEM WAS ORIGINALLY INSTALLED. If warranty service is necessary you must have

a clear copy of your sales receipt containing all of the information shown on the

following page.

After the first calendar year, from the date of purchase of this device, Directed

Electronics, Inc., promises to the ORIGINAL PURCHASER to repair or replace (with

a comparable reconditioned model) any electronic control module which proves

to be defective in workmanship or material under normal use FOR A CHARGE

OF $45.00, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED

BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH

THE SYSTEM WAS ORIGINALLY INSTALLED. If warranty service is necessary you

must have a clear copy of your sales receipt containing all of the information

shown on the following page.

This warranty contains the entire agreement relating to warranty and supersedes

all previous and contemporaneous representations or understandings, whether

written or oral. IN ANY EVENT, DIRECTED ELECTRONICS, INC. IS NOT LIABLE FOR

THE THEFT OF THE VEHICLE AND/OR ITS CONTENTS.

This warranty is void if the product has been damaged by accident, unreasonable

use, neglect, improper service or other causes not arising out of defects in mate-

rials or construction. This warranty is nontransferable and does not apply to any

unit that has been modified or used in a manner contrary to its intended purpose

and does not cover batteries. The unit in question must be returned to the man-

ufacturer, postage prepaid. This warranty does not cover labor costs for the

removal, diagnosis, troubleshooting or reinstallation of the unit. For service on an

out-of-warranty product a flat rate fee by model is charged. Contact your autho-

rized dealer to obtain the service charge for your unit.

These systems are a deterrent against possible theft. Directed Electronics, Inc. is

not offering a guarantee or insuring against the theft of the automobile or its

contents and disclaims any liability for the theft of the vehicle and/or its contents.

Directed Electronics does not authorize any person to create for it any other oblig-

ation or liability in connection with this security system.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE

EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE

STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT

LIMITED TO THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABIL-

ITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE

AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OF PATENTS, IN THE

UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER

OR ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR LIABLE

FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO ANY

CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, TOWING, REPAIR,

REPLACEMENT, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMER-

CIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITH-

STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY

TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some

states do not allow limitations on how long an implied warranty will last or the

exclusion or limitation of incidental or consequential damages. This warranty

gives you specific legal rights, and you may also have other rights which vary from

state to state.

IMPORTANT NOTE:

This product warranty is automatically void if its date code or serial number is

defaced, missing, or altered. This warranty will not be valid unless you have com-

pleted the warranty card and mailed it to Directed Electronics, Inc. within 10 days

after purchase to the address listed on the warranty registration card.

Make sure you have all of the following information from your dealer:

A clear copy of the sales receipt, showing the following:

■Date of purchase

■Your full name and address

■Authorized dealer's company name and address

■Type of system installed

■Year, make, model and color of the automobile

■Automobile license number

■Vehicle identification number

■All security options installed on automobile

■Installation receipts

limited lifetime consumer warran-

ty . . . . . . . . . . . . . . . . . . . . . . . . . .i

trademarks and copyrights . . . . .1

what is included . . . . . . . . . . . . .2

important information . . . . . . . .2

using your system . . . . . . . . . . . . .3

manual (active) arming . . . . . .3

automatic (passive) arming . . .3

armed protection . . . . . . . . . . .4

disarming . . . . . . . . . . . . . . . .5

disarming without a transmitter

. . . . . . . . . . . . . . . . . . . . . . . .5

valet® mode . . . . . . . . . . . . . .6

remote valet® . . . . . . . . . . . . .6

panic mode . . . . . . . . . . . . . . .7

nuisance prevention circuitry® . .7

diagnostics . . . . . . . . . . . . . . . . . .9

arming diagnostics . . . . . . . . .9

disarming diagnostics . . . . . . .9

table of zones . . . . . . . . . . . .10

rapid resume logic . . . . . . . . . . .10

glossary of terms . . . . . . . . . . . .11

notes . . . . . . . . . . . . . . . . . . . . . .12

quick reference guide . . . . . . . .13

contents

trademarks and copyrights

Code-Hopping™, Directed®, Doubleguard®, FailSafe®, Nuisance Prevention Circuitry®, NPC®,

Silent Mode™, Soft Chirp®, Stealth Coding™, Stinger®, Valet®, and Warn Away®are all

Trademarks or Registered Trademarks of Directed Electronics, Inc.

what is included

zControl module and harness

zPre-wired Valet®switch with integrated red status LED

zFailsafe®Starter Kill relay (if equipped)

important information

Congratulations on the purchase of your system. Due to the complex-

ity of this system, it must be installed by an authorized dealer only.

Installation of this product by anyone other than an authorized dealer

voids the warranty. All dealers are provided with a preprinted dealer

certificate to verify that they are authorized.

By carefully reading this Owner's Guide prior to using your system, you

will maximize the use of this system and its features.

You can print additional or replacement copies of this manual by

accessing the Directed web site at www.directed.ca.

using your system

manual (active) arming

The factory default is active arming. In this mode you can activate, or

arm, the system by locking the doors with your factory keyless entry

transmitter. When the system arms, you will hear a short horn honk and

see the parking lights (optional) flash once. While the system is armed,

the status LED will flash about twice a second, showing that the system

is actively protecting your vehicle. If you hear a second short horn honk

after arming, and see the status LED flashing in groups, see Diagnostics

section. This extra short horn honk is called Bypass Notification.

automatic (passive) arming

The system also can be programmed to arm itself automatically (called

passive arming). If the system is programmed for passive arming, it will

automatically arm 30 seconds after the ignition is turned off and the

system “sees” you leave the vehicle by opening and closing a door.

Whenever the system is in its 30-second passive-arming countdown,

the status LED will flash twice as fast as it does when the system is

armed. When the system arms, you will hear a short horn honk and the

parking lights (optional) will flash once. The doors lock (if connected

and programmed for passive locking).

nnoottee::Passive arming may qualify for a higher insurance dis-

count. Check with your insurance agent

nnoottee::If the ignition is turned on within 60 seconds of arming

the system, the system will automatically disarm.

armed protection

When armed, your vehicle is protected as follows:

z(This feature is optional and requires extra labour) If a door

is opened, the system will immediately start pulsing the horn

and flashing the parking lights (optional). Three seconds

later, the horn output changes to a continuous blast. This

progressive response gives you time to disarm the system

with your transmitter if you inadvertently open the door

while the system is armed, while still providing instant

response (even if the door is immediately closed).

zTurning on the ignition key triggers the same progressive

response as opening a door.

zThe starter interrupt prevents the vehicle’s starter from

cranking.

nnoottee::The vehicle may already be equipped with a starter kill

relay from the factory.

nnoottee::If programmed for instant trigger, the horn will output

full trigger response after the door has been opened (see

Programming Options)

nnoottee::If any protected doors are left open, the system will

not passively arm. Additionally, each time door is triggered

during the arming countdown, the 30-second countdown

starts over.

disarming

To disarm the system, unlock the doors using your factory keyless trans-

mitter. The horn will sound twice, and the parking lights (optional) will

flash twice. If the horn sounds either four or five times when disarm-

ing, refer to the Diagnostics section of this guide. This is called Tamper

Alert.

disarming without a transmitter

This feature allows you to override the system without the transmitter

should it be lost, damaged or disabled. To do this, you must have the ve-

hicle's ignition key and know where the integrated LED/Valet®switch is

located. The Valet®switch is activated by pressing the LED status indicator.

Turn the ignition to the “run”position.

Press and release the integrated

LED/Valet®switch, within 10 seconds.

After a few seconds the LED will stop

flashing and the vehicle should start. If it does not, you may have waited

too long. Turn the ignition off and try again.

nnoottee::The setting for the number of times the integrated

LED/Valet® switch must be pressed is set in the

Programming Section of this guide.

DRW-35

LED status indicator

Integrated

LED/Valet switch

valet®mode

You can prevent your system from arming, by using Valet®Mode. This

is very useful when washing the vehicle or having it serviced. In Valet®

Mode, the system will not arm, even with the transmitter, but all con-

venience functions (door locks, trunk release, etc.) will work normally.

To enter or exit Valet®Mode with the integrated LED/Valet®

switch:

Turn ignition to “on” position, then

turn to “off” position. Press

and release the integrated

LED/Valet®switch within 10

seconds. The status LED will

light steady if you have entered Valet®Mode. To exit Valet®Mode,

repeat the steps above. The LED will turn off when exiting Valet®Mode.

remote valet®

Remote Valet®is a convenient feature that makes bypassing the securi-

ty system easier. This feature makes it possible to exit or enter Valet®

Mode using your factory keyless transmitter.

1. Open any door.

2. Press LOCK on the transmitter.

3. Press UNLOCK on the transmitter.

4. Press LOCK on the transmitter.

The status LED will stay on if you have entered Valet®Mode, and it will

go out if you exited Valet®Mode.

DRW-35

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Alarma de coche de Clifford

Clifford

Clifford Matrix 10.2X Manual de usuario

Clifford

Clifford Self-Powered SmartSiren 4 60-589 Manual de usuario

Clifford

Clifford 3305X Manual de usuario

Clifford

Clifford intelliguard 800 Manual de usuario

Clifford

Clifford Delta IV Manual de usuario

Clifford

Clifford Advantage Manual de usuario

Clifford

Clifford 330.3X Manual de usuario

Clifford

Clifford BlackJax 4 Manual de usuario

Clifford

Clifford Matrix RS1.1 Manual de usuario

Clifford

Clifford Level Four Manual de usuario

Clifford

Clifford 5906X Manual de usuario

Clifford

Clifford 4606X Manual de usuario

Clifford

Clifford Matrix 2.2X Manual de usuario

Clifford

Clifford Concept 650MkII Manual de usuario

Clifford

Clifford Cyber 1 Manual de usuario

Clifford

Clifford Virtual Key 2UK Manual de usuario

Clifford

Clifford SOLARIS 5 Manual de usuario

Clifford

Clifford Bullet 4 Manual de usuario

Clifford

Clifford 3806X Manual de usuario

Clifford

Clifford concept 50 Manual de usuario

Clifford

Clifford Cyber 1 Manual de usuario

Clifford

Clifford Intelliguard Millenia Manual de usuario

Clifford

Clifford IntellVoice 4 Manual técnico

Clifford

Clifford Intelliguard 770 Manual de usuario

Manuales populares de Alarma de coche de otras marcas

Ultra Start

Ultra Start 2500M SERIES Manual de usuario

Ultra Start

Ultra Start 650 Series Manual de usuario

Audiovox

Audiovox Prestige Platinum+ APS-511C Manual de usuario

Sparkrite

Sparkrite SRA8 Manual de usuario

Viper

Viper 4708V Manual de usuario

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manual

Falcon

Falcon Predator XL3 Guía del usuario

Audiovox

Audiovox Auto Security XR91 Instrucciones de funcionamiento

CrimeStopper

CrimeStopper CS-8717 Guía de inicio rápido

Ultra Start

Ultra Start 450 SERIES Manual de usuario

Scytek electronic

Scytek electronic Vectra X3 Manual de usuario

Excalibur

Excalibur AL-1860-EDPB Manual de usuario

Gemini

Gemini 7057 Manual de usuario

FlashLogic

FlashLogic FLRSBA PRESTIGE Manual de usuario

Magicar

Magicar FAI-440 Manual de usuario

Viper

Viper 560XV Manual de usuario

SECO-LARM

SECO-LARM 300C Manual de usuario

Python

Python 660XP Manual de usuario

Clifford cx-427 Manual de usuario

Manuales populares de Alarma de coche de otras marcas