2
1. External Tyre Pressure Monitoring System Introduction
The M2(TPMS M2) tyre pressure monitoring system is installed on the tyre rim of a vehicle
to monitor real-time tyre pressure and temperature and can transfer specific signals to the
receiver inside the vehicle via RF mode. In this way, drivers are aware of tyre conditions,
which can contribute to decreasing the rate of car accidents.
1.1 System Application
The M2(TPMS M2) tyre pressure monitor system must be installed according to the steps
indicated in the installation manual by a qualified operator so that it can be used accurately
and ensure the product warranty. This system is applicable to the tyres of common family
two-wheel vehicles. It can measure tyre pressure up to 60 psi (420 kpa). When the alert lights
or alert bells signal, drivers should slow down and park in a safe area, check the condition of
the tyre and have it repaired at a qualified repair company nearby.
Warnings
1. Applying sealant or special chemical fillings to the tyre may cause errors in the TPMS
or affect emitter function.
2. The tyre pressure monitor system (TPMS) is an affiliated piece of equipment for
vehicle safety. Drivers should always make routine inspections of tyre tread and tyre
condition.
3. This system transfers wireless signals; therefore, in specific circumstances, signals may
be weakened or blocked due to interference factors, incorrect operating or
inappropriate installation. We suggest choosing electronic products that comply with
requirements related to vehicle safety.
4. Drivers are supposed to maintain good driving habits and enact routine maintenance
of all key systems, which can help to reduce fuel consumption.
Drivers are supposed to make routine inspections and replace tyre valves yearly, in case of
leaking or other problems.
