ClientPOS PT6300 Manual de usuario
1 | 95
PT6300
User Manual
Version: 2.0
P/N :
Cover page
ClientPOS PT6300 User Manual
Version: 2.0
2 | 95
Copyright
Copyright 2010 Publishing. All Rights Reserved.
This manual, software and firmware described in it are copyrighted by their respective owners
and protected under the laws of the Universal Copyright Convention. You may not reproduce,
transmit, transcribe, store in a retrieval system, or translate into any language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, biological, molecular,
manual, or otherwise, any part of this publication without the express written permission of the
publisher.
All products and trade names described within are mentioned for identification purpose only.
No affiliation with or endorsement of the manufacturer is made or implied. Product names and
brands appearing in this manual are registered trademarks of their respective companies.
The information published herein has been checked for accuracy as of publishing time. No
representation or warranties regarding the fitness of this document for any use are made or
implied by the publisher. We reserve the right to revise this document or make changes in the
specifications of the product described therein at any time without notice and without obligation
to notify any person of such revision or change.
ClientPOS PT6300 User Manual
Version: 2.0
3 | 95
Safety Instructions
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or
sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
5. Make sure power cord such a way that people can not step on it. Do not place anything
over the power cord.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for long time, disconnect the equipment from main to avoid
being damaged by transient over voltage.
8. Never pour any liquid into opening, this could cause fire or electrical shock.
9. If one of the following situations arises, get the equipment checked by a service
personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well or you can not get it work according to user
manual.
e. The equipment has dropped and damaged.
10. Do not leave this equipment in an environment unconditioned, storage temperature below
-20°C or above 60°C, it may damage the equipment.
11. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
1. Danger of explosion can happen if the battery is incorrectly replaced. Replace only the
original or equivalent type recommended by the manufacture. Dispose used batteries
according to the manufacture’s instructions.
Do not remove the cover, and ensure no user serviceable components are inside. Take the
unit to the service center for service and repair.
4 | 95
Table of Contents
1. Packing List……………………………………………….
1-1 Standard Accessories………………………………………...
1-2 Optional Accessories…………………………………………
2. System View ………………………………………………
2-1 Rear View………………………………………………………
2-2 Specification……………………………………………………
2-3 Internal Layout…………………………………………………
2-4 Touch Panel Life test condition……………………………….
3. Pin Definition………………………………………………
4. Rear I/O Interface…………………………………………
5. System Assembly & Disassembly……………………
5-1 HDD…………………………………………………………….
5-2 CFast Card……………………………………………………..
5-3 MSR…………………………………………………………….
5-4 Cable Cover……………………………………………………
5-5 15” 2nd Display…………………………………………………
5-6 Internal VFD…..……………………………………………….
5-7 Wi-Fi…………………………………………………………….
5-8 8” 2nd Display…………………………………………………..
5-9 1D/2D/i-Button with RFID module..………………………….
6. Device Driver Installation………………………………
6-1 Resistive Type Touch Panel and P-Cup…………………….
6-2 MagStripe Card Reader Configuration Utility………………
6-3 Fingerprint Reader……………………………………………
6-4 RFID……………………………………………………………
6-5 Internal VFD…………………………………………………...
6-6 i-Button Reader Configuration Utility…………………..……
6-7 Installation and Testing of Smart Card Reader…………….
6-8 Wi-Fi……………………………………………………………
7. BIOS/Utility Setup………………………………………...
7-1 Advanced………………………………………………………
7-2 Chipset…………………………………………………………
7-3 Boot…………………………………………………………….
7-4 Security………………………………………………………...
P6
P6
P6
P7
P7
P8
P9
P10
P11
P13
P15
P15
P15
P17
P17
P18
P22
P23
P25
P29
P30
P30
P36
P41
P52
P62
P66
P69
P74
P75
P76
P87
P91
P92
ClientPOS PT6300 User Manual
Version: 2.0
5 | 95
7-5 Save & Exit…………………………………………………….
8. LCD Surface Cleaning……………………………………
P93
P94
6 | 95
Packing List
1-1 Standard Accessories
a.
b.
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. Screw x2
f. Cable Cover
c.
d.
e.
f.
1-2 Optional Accessories
a.
b.
a. Single MSR
b. 3 IN 1 MSR
c. Screw x2
c.
Packing List
1
ClientPOS PT6300 User Manual
Version: 2.0
7 | 95
System View
2-1 Rear View
Item
1. Mic
2. Line-Out
3. RJ11 (Cash Drawer )
4. RJ45(LAN)
5. USB 2.0 X4
6. COM1
7. VGA
8. COM2
9. RJ45(COM 3 external)
10. PS2(K/B)
11. 19V DC Input
12. Parallel port (Option)
13. Power Button
14. MSR/Smart Card/
i-Button/ Fingerprint/
RFID (Option)
15. VFD(Option)
16. HDD/CFast CARD
System View
2
ClientPOS PT6300 User Manual
Version: 2.0
8 | 95
2-2 Specification
Processor Intel® Core™ i3-2120 processor (3M Cache, 3.30GHz)
Intel® Pentium® G850 processor (3M Cache, 2.90GHz)
Intel® Celeron® G540 processor (2M Cache, 2.50GHz)
Chipsets: North Bridge/South
Bridge
H61
Memory One SO-DIMM socket supports DDR3 1333MHZ
up to
4GB
Audio Line-out/Mic-in
Network
RJ45 10/100/1000 Base-T
USB 4*USB 2.0
Storage
CFast type I / 2.5” SATA HDD / SSD
BIOS
AMI UEFI BIOS
Power
DC 19V 180W Adaptor
Thermal Solution
Heat sink + Fan X3
Dimension
368 (W) x 264.2 (H) x 285 (D) mm
Operating Temperature
0°C ~ 35°C
Storage Temperature
-20°C ~ 60°C
Storage Humidity
20% ~ 80%, non-condensing
Display
LCD Panel Size 15-inch TFT Active Matrix Display
Resolution
1024*768 Pixels
Brightness
250 cd/m2
Touch Panel
5-wire Resistive Type / Projected Capacitive Type
Tilt Angle
30°~90°<DC 36W(12V) external power adapter>
ClientPOS PT6300 User Manual
Version: 2.0
9 | 95
2-3 Internal Layout
ClientPOS PT6300 User Manual
Version: 2.0
10 | 95
2-4 Touch Panel Life Test Condition
2-4-1 Pointing life test
Hit it thirty five million times with a silicon rubber of R 0.8, Hs 60 and measure it. The
measurement must satisfy the under-metioned items. Hitting force shall be 250g and hitting
speed 3 times per second.
- Resistance state should the same 5.1
- Linearity should the same 5.2
-Insulation resistance should the same 5.3
2-4-2 Hand Writing test
Write one hundred thousand times of 40mm straight line to and fro (counts as twice) with and
engineering plastic stylus in AA area. The measurement items must satisfy the
under-mentioned items. Writing force shall be 250g and writing speed 3,000 times per hour.
- Resistance state should the same 5.1
- Linearity should the same 5.2
- Insulation resistance should the same 5.3
Tabla de contenidos
Otros manuales de Terminal táctil de ClientPOS
