Clevo 2200C Manual de usuario
Notice
The company reserves the right to revise this publication or to change its contents without notice.
Information contained herein is for reference only and does not constitute a commitment on the part
of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any
errors or inaccuracies that may appear in this publication nor are they in anyway responsible for
any loss or damage resulting from the use (or misuse) of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, trans-
lated, transmitted or reduced to any machine readable form without prior consent from the vendor,
manufacturer or creators of this publication, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or regis-
tered trademarks of their respective companies. They are mentioned for identification purposes only
and are not intended as an endorsement of that product or its manufacturer.
©March, 2001
Preliminary Version
Contents
Chapter 1: Introduction ........................... 1 - 1
System specifications (general) ...................1 - 2
Chapter 2: Chipset and
Mainboard information ............................ 2 - 1
CPU...............................................................2 - 1
Chipsets........................................................2 - 3
SiS630S ............................................................ 2 - 3
PCCardChipset- PCI1410 ............................. 2 - 11
Ports............................................................2 - 13
Mainboard....................................................2 - 14
Mainboardcomponentslist ............................... 2 - 14
Mainboardphoto .............................................. 2 - 15
Chapter 3: Disassembly.......................... 3 - 1
Sizechart forscrews andhex nuts: .................... 3 - 1
Disassembly steps .......................................3 - 2
StepstoremovetheCD-ROM/DVD-ROM: .......... 3 - 2
StepstoremovetheCPU:................................... 3 - 2
StepstoremovetheFDD:................................... 3 - 2
StepstoremovetheHDD:................................... 3 - 3
Stepstoremovetheinverterboard:..................... 3 - 3
StepstoremovetheLCDpanel:.......................... 3 - 3
Stepstoremovethemainboard:.......................... 3 - 4
Removal Procedures ....................................3 - 5
Removethebattery............................................. 3 - 5
Removethekeyboard......................................... 3 - 6
RemovetheHDDassembly ................................ 3 - 7
RemovetheCD-ROM\DVD-ROMassembly ......... 3 - 8
Removetheheatsink ......................................... 3 - 9
Applyingaheatsinkpad .................................... 3 - 9
RemovetheCPU .............................................. 3 - 10
ReinstalltheCPU ............................................. 3 - 10
Separatethenotebookbaseintwo ................... 3 - 11
RemovetheFDDassembly............................... 3 - 14
RemovetheCD-ROMtray ................................ 3 - 14
RemovetheFan ............................................... 3 - 14
Removethemainboardand
trayfrom thebottom case ................................. 3 - 15
Removethemainboard
fromthemainboardtray ................................... 3 - 16
The LCD Panel ...........................................3 - 17
RemovetheLCDpanelframe ........................... 3 - 17
RemoveLCDpanelfromtheLCDpanelcase.... 3 - 18
RemovetheLCDpanelfromthebracket ........... 3 - 20
AppendixA: Mechanical Drawings and
Parts Lists ................................................A - 1
2200C ...........................................................A - 1
BottomHalfassemblyandpartslist .....................A - 1
LCDpanel(12.1”)assemblyandpartslist...........A - 2
LCDpanel (13.1”, 15.3”)assembly and
partslist .............................................................A - 3
LCDpanel(14.1”)assemblyandpartslist...........A - 4
KeyboardandTouchpadassembly .....................A - 5
KeyboardandTouchpadassemblypartslist ........A - 6
FDDassemblyandpartslist ...............................A - 7
HDDassemblyandpartslist ...............................A - 8
CD-ROMassemblyandpartslist.........................A - 9
DVD-ROMassemblyandpartslist .................... A - 10
2700C .........................................................A - 11
Bottomhalfassemblyandpartslist ................... A- 11
LCDpanel (13.3”)assemblyandpartslist........ A - 12
LCDpanel(14.1”)assemblyandpartslist......... A - 13
KeyboardandTouchpadassembly ................... A - 14
KeyboardandTouchpadpartslist ..................... A - 15
FDDAssemblyandpartslist ............................. A - 16
HDDassemblyandpartslist ............................. A - 17
CD-ROMAssemblyandpartslist ...................... A - 18
DVD-ROMassemblyandpartslist .................... A - 19
Appendix B: Schematic Diagrams .........B - 1
Appendix C: Switch Settings ..................C - 1
ClockSettings(SW6)........................................ C - 1
PanelIDSettings(SW7) ................................... C - 2
Introduction
1 - 1
Chapter 1: Introduction
This manual covers information you will need to service or upgrade your Notebook Computer.
Information about operating the computer (e.g. getting started, etc...) is in the User’s Manual. Driver
Information is also found in the User’s Manual. The User’s Manual is shipped with the computer.
Operating Systems (Windows ME, Windows 2000, etc.) have their own manuals as do application
software. If you have any questions regarding those, please consult their user’s manual.
This manual is intended for service personnel who have completed sufficient training to
undertake maintenance and inspection of personal computers. It is organized to allow you to look up
basic information for servicing and/or upgrading components of the notebook computer. The follow-
ing information is covered.
– Specifications
– Chipset and Mainboard information
– Disassembly
– Mechanical drawings and Parts Lists
– SchematicDiagrams
– SwitchSettings
1 - 2
Service Manual
System specifications (general)
The main unit of the Model 2200C/2700C Notebook PC has the following components:
– Intel FC-PGA370 Pentium III with AGP technology-based mainboard, using the SiS630S
chipset solution supporting SDRAM with 0MB on-board DRAM, expandable to 32MB, 64MB,
96MB, 128MB, 192MB, 256MB, or 512MB using one or two expansion SODIMMs
– user-installed modules: CD-ROM or DVD or CD-RW ROM
– mainstorage (HDD) bay:principal HDD 2.5”12.7/9.5mm, supports PIOmode 4/ATA-33/66/
100 (Ultra DMA) and Master mode IDE.
– Userinterfaces
- one internal keyboard, 84 keys (depending on the language)
- one built-in touchpad
- one 1024x768 XGA Color TFT LCD with CCFT backlight, size 13.3” or 14.1”, supports
IDCT
– Power Solutions
- power bay: battery pack
- AC adapter
Introduction
1 - 3
CPU ( FC-PGA370 )
Intel Celeron-450 (1.6V)
Intel Celeron-500 (1.6V)
Intel Celeron-550 (1.6V)
Intel Pentium III-600 (1.65V)
Intel Pentium III-650 (1.65V)
Intel Pentium III-700 (1.65V)
Intel Pentium III-750 (1.65V)
Intel Pentium III-800 (1.65V)
Intel Pentium III-850 (1.65V)
Intel Pentium III-866 (1.65V)
Intel Pentium III-933 (1.65V)
Memory
L2 Cache (on die)
Celeron(.18) series 128KB
Pentium III series 256KB
On board RAM 0MB
Upgradable to 512MB
TouchPad
built-i n x 1
interface PS/2
Keyboard
Keys 84
Fn key support YES
Integrated numeric keypad YES
Inverted “T” layout cursor keys YES
HDD
Easy change module 6GB or up
Drive size 2.5”
Height maximum 12.7mm
Average access time <13ms>
Interface PCI local bus master IDE with ultra
DMA33/ 66/100
FDD
Easy change module 3.5" 1.44MB
CD-ROM(MKECR175)24X
Easy change module
CD type 12.8cm
Height 12.7mm
Datatransfer rate 3600KB/s (max)
Random access time <100m>
Compliance Multimedia PC-2 Spec.
1 - 4
Service Manual
Transport drawertype load/eject
Interface PCI local bus master IDE
BIOS
InSyde 256KB
Display
LCD/CRT (simultaneous) YES
VGA/EGA/CGA/Herculescompatible YES
AGP 3D graphics accelerator YES
Adjustable brightness YES (standard)
LCD\TFT
Backlight CCFT
Size 13.3” or 14.1”
Resolution 1024x768
Color (CRT) 16,77M
Monitor 1280x1024
Support IDCT
Audio
Built-in 2 speakers and 1 microphone YES
3D, Sound Blaster compatible YES
Speaker-outJack YES
Microphone-inJack YES
PowerSupply
AC adapter
AC-in 100-240V/47-63Hz
Capacity 65W
Battery pack NiMH/Li-Ion
PowerSaving Management
Doze mode YES
PS/2 Sleep mode YES
Suspend/Resumemode YES
Suspendto HDD mode YES
Hot key control suspend YES
Closing LCD display off YES
APM ver 1.2 support YES
ACPI Ver 1.0b support YES
Ports
Serialport x 1
IrDA/SIR/ASK/FIR x 1
Parallel port x 1
15 pin external video port x 1
Introduction
1 - 5
External 101/102 keyboard port/ PS/2 mouse x 1
PC Card Standard Type I or Type II x 1
Modem (RJ-11) port for MDC x 1 (optional)
USB connector x 2
speaker-outjack x 1
microphone-injack x 1
LAN (RJ45) port x 1
Physical
Dimension 308 mm(W)
254mm(D)
37.5mm(H)
Weight 3.2KG(with Lithium-lon battery)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Computadora portátil de Clevo
Clevo
Clevo W340EU Manual de usuario
Clevo
Clevo NP70HH Manual de usuario
Clevo
Clevo N350TW Manual de usuario
Clevo
Clevo Mustang W650 Manual de usuario
Clevo
Clevo X7200 Manual de usuario
Clevo
Clevo W370ST Manual de usuario
Clevo
Clevo P170EM Manual de usuario
Clevo
Clevo W950BU Manual de usuario
Clevo
Clevo P970RN Manual de usuario
Clevo
Clevo S3101 Manual de usuario
Clevo
Clevo P150EM Manual de usuario
Clevo
Clevo N240GU Series Manual de usuario
Clevo
Clevo W270EFQ Manual de usuario
Clevo
Clevo W330SU Manual de usuario
Clevo
Clevo NP50HP Manual de usuario
Clevo
Clevo M81P Manual de usuario
Clevo
Clevo PB70ED Manual de usuario
Clevo
Clevo W243HWQ Series Manual de usuario
Clevo
Clevo M740S Manual de usuario
Clevo
Clevo W251HSQ Manual de usuario
