ClearWave U200 Manual de usuario

User Manual

U200 EVDO USB Modem

서식 있음: 글꼴: (한글)

맑은 고딕

1. BEFORE USING U200......................................................................................3

About This User’s Manual .............................................................................3

Product Overview .........................................................................................3

Product Package Contents............................................................................3

Introduction to U200 USB Modem ................................................................4

Product Features ..........................................................................................4

Product handling ..........................................................................................5

Configuration................................................................................................5

2. INSTALLATION AND SETUP FOR EASYLINKY..................................................5

Installing Software.......................................................................................5

Setup Program – Windows ...........................................................................6

Setup Program - Mac OS X..........................................................................11

3. USING EasyLinky..........................................................................................16

Features .....................................................................................................16

Getting Started...........................................................................................17

Connecting .................................................................................................17

4. PREFERENCES EasyLinky..............................................................................19

General Preferences ...................................................................................19

WWAN Specific Settings .............................................................................19

VPN Settings...............................................................................................20

Update settings ..........................................................................................21

Additional Features ....................................................................................22

5. INSTALLING U200........................................................................................26

Recommended System Requirements.........................................................26

Remove the Modem from your Computer....................................................27

Using the USB Modem Extension USB cable................................................27

Trouble Shooting ........................................................................................27

CARE AND MAINTENANCE...........................................................................27

WARRANTY.................................................................................................28

SAFETY INFORMATION ...............................오류! 책갈피가 정의되어 있지 않습니다.

Regulatory Notice.......................................오류! 책갈피가 정의되어 있지 않습니다.

1. BEFORE USING U200

About This User’s Manual

You will find all the information you need to install and use the U200 in this user manual.

Before using the U200, you must properly install the modem by closely following the

installation instructions.

Instructions

yInstall the EasyLinky software by inserting the U200 USB Device into your PC. The

installation software is included in the U200 modem memory. When you insert the U200

into your computer, the installation process will automatically begin.

yIt is highly recommended that you read the safety precautions described in this manual

before using the U200.

Documents Included on your Modem Memory

yBroadband Usage Conditions, Terms & Conditions

yUser Manual

Product Overview

Thank you for purchasing U200 USB Modem.

The U200 is a high-speed wireless device that enables your computer to connect to 3G

high-speed wireless network.

The U200 is simple to install and use.

Product Package Contents

The following items are included in the product package. If any of the items listed below

are missing, please contact the retail location where you purchased the product.

Introduction to U200 USB Modem

The U200 is designed for the USB port on your computer, which is available in most PC

models. The U200 can be used to access the Internet, send and receive e-mail. It is

extremely useful when you are away from home, on the road, or wherever wired

Internet access is not readily available.

Product Features

- Power management: The U200 utilizes power management and system overhead

reduction functions provided by the USB interface for maximum power savings.

- Antenna design: Efficient, innovative design optimizes data transfer rate and sensitivity

to network signals.

- Extension USB cable connector: Connect the USB cable to your computer to increase

RF performance, and to solve clearance issues.

- USB Modem that supports Type A USB Port interface.

- Supports North American PCS (1900 MHz) and Cellular (800 MHz) bands.

- Utilizes Qualcomm QSC6085 chipset.

U200

USB Modem

USB

Extension

Cable

Quick Start Guide

Carrying Pouch

- Supports high-speed network technologies.

- Supports Windows XP, Vista, 7 and Apple Macintosh systems with installed EasyLinky

software and driver.

Product handling

- Do not place any adhesive labels on the USB connector. It may leave a sticky residue

that can cause problems inside the PC USB port.

- The U200 USB device should easily slide into the USB port. Do not force the U200 into

the USB port as it may cause damage to the modem and/or the port.

- keep the U200 in a dry and clean place. (Storage temperature: -22°F to 149°F [- 30°C

to 65°C]). Keep your device away from liquids, dust and excessive heat.

Configuration

To use the U200, you should install the EasyLinky software included in the modem

memory and configure the U200 USB device. See the next section for more information

on software installation and USB device configuration.

This section will guide you through the installation and setup process for EasyLinky.

Before getting started, you should become familiar with the documentation that came

with your USB Modem.

2. INSTALLATION AND SETUP FOR EASYLINKY

This section will guide you through the installation and setup process for EasyLinky.

Before getting started, you should become familiar with the documentation that came

with your USB Modem.

Installing Software

Warnings

yMake sure to complete the unplugging/ejection process before removing the U200.

If you remove the device improperly, the modem may be damaged.

Notes

yIf you have inserted the device properly, Windows will inform you of the new hardware.

Wait until Windows completes the “Found New Hardware” task.

Note: In Windows 2000, several windows similar to “Found New Hardware” window can

appear and disappear automatically. In Windows XP, several tool tips similar to the

“Found New Hardware” function will appear and disappear in the system tray

automatically. In Windows Vista, several tool tips similar to the “Installing device driver

software” function will appear and disappear in the system tray automatically. Once

hardware detection is complete, you will be prompted to start activation.

yIt is normal to hear a short beep sound each time you insert or remove the U200.

It is an audible notification that your PC recognizes the new hardware.

Getting Started (Windows)

To install the EasyLinky software:

1. Turn on your computer then close all applications.

2. Insert the U200 modem into your USB port.

3. Your computer will recognize U200 modem and start the installation sequence

automatically. If the program does not launch automatically, go to my computer and

select the ‘3Gstick’ drive and double click ‘start.exe’ program.

4. Follow the steps in the next section.

Setup Program – Windows

STEP 1: The “Welcome to the EasyLinky Setup Wizard” screen appears. Click the [Next]

button to continue with the installation process.

STEP 2: You are now ready to select the location on your computer where EasyLinky

should be installed. It is recommended that you do not modify the default destination

folder. Click the [Next] button to continue.

STEP 3: During this step the components of EasyLinky product are being installed onto

your computer. Installation will occur to the destination folder specified in Step 2.

STEP 4: Installation of EasyLinky is now complete. Click the [Close] button to leave the

EasyLinky setup program and begin using your new software.

Tabla de contenidos

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario