ClearCube A1010 Manual de usuario

Quick Start Guide

ClearCube Technology 8834 Capital of Texas Hwy N Austin, Texas 78759 voice 512 652 3500 www.clearcube.com

The A1010 single-processor blade allows upgrading the memory from

the factory configuration of 512 MB to as high as 4 GB. For optimum

compatibility, always use memory modules from ClearCube.

MEMORY CONFIGURATIONS

The A1010 features four memory slots that accept 184-pin DDR400

SDRAM DIMMs. The memory is organized in two pairs of sockets, and

can operate in interleaved or non-interleaved memory mode. Use only

non-ECC, non-registered memory with the A1010 blade.

The A1010

can work with a single DIMM, as well as with a combination

of DIMMs of different sizes and speeds. When equal size DIMMs are

used in pairs, the memory controller on the A1010 uses interleaved

memory to give better performance.

The memory channels are color-coded. Channel A has blue sockets.

Channel B has black sockets. ClearCube recommends populating

Channel A first.

Note: Using mismatched DIMMs incurs a performance penalty. With

equal-sized DIMMs, a mismatch in speed or timing causes the system

to run at the slower of the two DIMMs. With mismatched sizes, the sys-

tem always runs in non-interleaved mode at the slower speed or timing

of the two DIMMs.

A1010

Memory Upgrade

DIMM_A1

DIMM_A2

DIMM_B2

DIMM_B1

Channel A – Populate First Channel B – Populate Second

A1010 Blade

ClearCube Technology 8834 Capital of Texas Hwy N Austin, Texas 78759 voice 512 652 3500 www.clearcube.com

G020089-A rev 8/15/2006

RoHS

WEEE Disposal Guidelines

In the European Union, this electronic

product falls under the European

Directive (2002/96/EC) WEEE. When it

reaches the end of its useful life or is

no longer wanted, it should not be dis-

carded with conventional waste, but

disposed of at an approved designated

recycling and/or treatment facility.

Laws are different in each country, so

please check with your local authori-

ties for proper disposal instructions.

For assistance, contact ClearCube at

[email protected]

UPGRADING MEMORY

Observe suitable anti-static procedures whenever you work on blades. To

upgrade memory for an A1010, do the following:

1. Power down the blade, and remove it from the A3000 chassis.

CAUTION: Some surfaces may be hot.

2. Place the blade on a suitable flat surface.

3. Remove the three 6-32 screws that retain the top cover.

Slide the top cover back and rotate to remove from chassis.

5. Pull the tabs on the sides of the memory socket away from the DIMM

socket. If necessary, remove any existing memory.

6. Insert each new DIMM into its socket, pressing gently to seat it com-

pletely. Push the tabs on the sides of the memory socket toward the DIMM

so that they latch.

7. Replace the top cover panel, ensuring that the side walls of the cover are

on the outside of the flanges on the base frame.

8. Replace the three 6-32 screws that retain the top cover.

9. Replace the blade in the A3000 chassis.

10. Replace the bezel.

11. Depress the power button on the back of the blade to power it on.

For more information about the A1010 blade and A3000 chassis system,

please see the A Series Data Center Products User’s Guide or contact

ClearCube Technical Support.

Email: [email protected]

Website: support.clearcube.com

In the US (866) 652-3400

Outside the US +1 (512) 652-3400

Otros manuales para A1010

Tabla de contenidos

Otros manuales de Servidor de ClearCube

ClearCube

ClearCube A1010 Manual técnico

ClearCube

ClearCube R1200 Manual de usuario

ClearCube

ClearCube R1350 Manual técnico

ClearCube

ClearCube I9422 Zero Client Manual de usuario

ClearCube

ClearCube I9420 Manual de usuario

ClearCube

ClearCube CD9424 Manual de usuario

ClearCube

ClearCube A1010 Guía de referencia rápida

ClearCube

ClearCube MVX Manual de instrucciones

ClearCube

ClearCube A1410 Manual de usuario

ClearCube

ClearCube CD7424SFPST Manual de usuario

ClearCube

ClearCube R1300 Manual de usuario

ClearCube

ClearCube R2200 Manual de usuario

ClearCube

ClearCube I8800 Manual técnico

ClearCube

ClearCube I8442 Manual de usuario

ClearCube

ClearCube SmartVDI-110 Manual de usuario

ClearCube

ClearCube I8330 Manual de instrucciones

ClearCube

ClearCube R3040S Manual de usuario

ClearCube

ClearCube R2200 Hoja de especificaciones

ClearCube

ClearCube C7424 Manual de usuario

ClearCube

ClearCube V5340 Manual de usuario

ClearCube

ClearCube R1200 Manual técnico

ClearCube

ClearCube I8800 Manual de servicio

ClearCube

ClearCube R1350 Manual de usuario

ClearCube

ClearCube R1200 Manual técnico

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario