Claypaky VOLERO WAVE Manual de usuario
INS RUC ION MANUAL
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the
rich Claypaky range, has been designed and made with
total quality to ensure excellent performance and best
meet your expectations and requirements.
INDEX
ENGLISH
Page Contents
2 1. Safety information
3 2. Unpacking and preparation
3 3 Installation and start-up
3 3.1 Fixture overview
4 3.2 Installing the fixture
6 3.3 Connecting to mains supply
6 3.4 Connecting the control signal line: DMX / Art-Net
7 3.5 Switching on the fixture and basic SetUp
8 4. Maintenance
8 4.1 Periodical cleaning & Caution
9 4.2 Battery removal
10 5. Dimensions
10 6. Cause and solution of problems
CL3023
VOLERO WAVE
2
VOLERO WAVE
EN
I
DE
ES
FR
RU
SAFE Y INFORMA ION
IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:
www.claypaky.com
Ref: FIS02D - Safety Information Volero Wave
INFORMAZIONI DI SICUREZZA
IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
www.claypaky.com
Rif: FIS02D - Safety Information Volero Wave
INFORMA IONEN ZUR SICHERHEI
WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
www.claypaky.com
Ref: FIS02D - Safety Information Volero Wave
INFORMACIONES DE SEGURIDAD
IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
www.claypaky.com
Ref: FIS02D - Safety Information Volero Wave
CONSIGNES DE SÉCURI É
IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:
www.claypaky.com
Réf. : FIS02D - Safety Information Volero Wave
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Claypaky рекоменд ет внимательно прочитать и сохранить инстр кцию по технике безопасности
данного изделия, которая всегда дост пна в электронном формате по след ющей ссылке:
www.claypaky.com
Наименование: FIS02D - Safety Information Volero Wave
1. SAFE Y INFORMA ION
3
VOLERO WAVE
1
Packing contents - Fig. 1
2. UNPACKING AND PREPARA ION
ON / OFF
Neutrik PowerCON
TRUE1 (IN/OUT)
LCD Display
Functional buttons
5pin DMX IN/THRU
Ethernet
Safety loop
2
3. INS ALLA ION AND S AR -UP
3.1 Fixture overview
Continue ‘
4
VOLERO WAVE
3
4
2
3
4
2
1
3
Projector installation - Fig. 3
The projector can be installed on the floor resting on specific rubber feet, on a truss, on the ceiling or wall.
WARNING: the safety chain must be installed except when the projector rests on the floor. (Code 105041-003 available upon request).
his must be secured to the projector support structure and then hooked to the two fastening points.
3.2 Installing the fixture
5
VOLERO WAVE
1
3
2
4
Projector installation - Fig. 4
Continue ‘
6
VOLERO WAVE
Connections to the power mains - Fig. 6
Power Supply
2
1
2
3
1
Connecting and disconnecting the power cord - Fig. 5
5
6
DMX 512
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
Ethernet
Connections to the control signal line (DMX) - Fig. 7
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. End connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted on the last projector with a resistance of 120 (minimum 1/4 W) between terminals 2 and 3.
IMPOR AN : The wires must not make contact with each other or with the metal casing of the connectors. The casing must be connected to the shield
braid and pin 1 of the connectors.
MAINS OUT
Max 4 units
Max 1600VA
7
3.3 Connecting to mains supply
3.4 Connecting the control signal line: DMX / Art-Net
VOLERO WAVE
7
3.5 Switching on the fixture and basic SetUp
Setting addresses and options with the projector disconnected
The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press
A
ENTER
to momentarily activate the display and thus access the settings. Once the required operations have been
carried out, the display will switch off again after a wait time of 30 seconds.
USING HE MENU:
1) Press LEFT
D
once – “Main Menu” appears on the display.
2) Use the UP
B
and DOWN
C
keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Informations (Informations Menu): To read the counters, software version and other information.
• Manual Control (Manual control Menu): To trigger the test and manual control functions.
• Test (Test Menu): To check the proper functionning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.
3) Press
F
to display the first item in the selected menu.
4) Use the UP
B
and DOWN
C
keys to select the MENU items.
Switching on the projector - Fig. 8
The projector immediately turns on when the power cord is plugged.
C ay Paky Vo ero Wave Address xxx
Vo ero Wave Software re ease x.x x xxxxx ??? *
The control panel (Figure 8) has a display and buttons for complete programming and management of the projector menu.
The display can be in one of two conditions: idle status and settings status. When idle, the projector DMX address is displayed.
If no button is pressed after a wait period (about 60 seconds) when in menu settings status, the display automatically returns to idle status. It should
be noted that when this condition occurs, any modified value that has not yet been confirmed with the
A
key will be cancelled.
8
Button functions – Menu SET
• If pressed in id e status: Cyclically switches between idle status and menu settings.
• If pressed whi e setting a menu: Moves to an upper level without changing anything (exits the function)
Decreases the value displayed (with auto-repetitions), or passes to the next item on the menu
For quick access to the minimum parameter value, press the UP key while holding down the DOWN key.
Increases the value displayed (with auto-repetitions), or passes to the previous item on the menu
For quick access to the maximum parameter value, press the DOWN key while holding down the UP key.
Confirms the displayed value or activates the displayed function or opens the next menu.
SELECT
DOWN
UP
ENTER
Continue ‘
WARNING:
no alcohol
8
VOLERO WAVE
9
CAU ION:
•To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of
the working environment (air humidity, presence of dust, salinity, etc.).
It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following
operations:
- General cleaning of internal parts.
- Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
- General visual check of the internal components, cabling, mechanical parts, etc.
- Electrical, photometric and functional checks; eventual repairs.
Cleaning the lenses
Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, non-abrasive cloth. (WARNING: the use of alcohol or any other
detergent could damage the lenses).
4.1 Periodical cleaning & Caution
Parts requiring frequent cleaning.
Light collimation system
This product contains internal light
collimation system. Avoid intense
light from any angle.
4. MAIN ENANCE
9
VOLERO WAVE
This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the
regulation in force.
2
2
1
4
3
5
7
6
8
10
4.2 Battery removal
1000
(39.37")
315,7
(12.43")
329
(12.95")
Ø182
(7.17")
155,4
(6.12")
5. DIMENSIONS
10
VOLERO WAVE
THE PRO ECTOR WILL NOT SWITCH ON
TROUBLE
ELECTRONICS NON-OPERATIONAL
DEFECTIVE PRO ECTION
REDUCED LUMINOSITY
POSSIBLE CAUSES CHECKS AND REMEDIES
No power supply.
LED burnt out or defective.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Optic fault.
Dust or grease deposits.
Check the power supply voltage.
Call an authorised technician.
Replace the cables.
Check addresses (see instructions).
Call an authorised technician.
Call an authorised technician.
Clean (see instructions).
6. CAUSE AND SOLU ION OF PROBLEMS
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Equipo de iluminación de Claypaky
Claypaky
Claypaky C52143 Manual de usuario
Claypaky
Claypaky ALPHA SPOT QWO 800 Manual de usuario
Claypaky
Claypaky HY B-EYE K15 Manual de usuario
Claypaky
Claypaky TAMBORA LINEAR 100 Manual de usuario
Claypaky
Claypaky ALPHA BEAM 700 Manual de usuario
Claypaky
Claypaky Alpha Spot 575 HPE Manual de usuario
Claypaky
Claypaky ALPHA SPOT HPE 1500 Manual de usuario
Claypaky
Claypaky ALPHA SPOT HPE 300 Manual de usuario
Claypaky
Claypaky STAGE COLOR 1200 SV Manual de usuario
Claypaky
Claypaky C52162 Manual de usuario
Claypaky
Claypaky Tiger C.C. HMI 575 Manual de usuario
Claypaky
Claypaky C61070 Manual de usuario
Claypaky
Claypaky ALPHA BEAM 1500 Manual de usuario
Claypaky
Claypaky AXCOR WASH 600 Manual de usuario
Claypaky
Claypaky AXCOR WASH 300 Manual de usuario
Claypaky
Claypaky DISPLAY C52145 Manual de usuario
Claypaky
Claypaky C61044 Manual de usuario
Claypaky
Claypaky A.LEDA WASH K10 CC Manual de usuario
Claypaky
Claypaky IGLOO Manual de usuario
Claypaky
Claypaky CP COLOR 150-E Manual de usuario
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
