Claypaky AXCOR WASH 600 Manual de usuario

INSTRUCTION MANUAL
 
Congratulations on choosing a Claypaky product! 
We thank you for your custom. 
Please note that this product, as all the others in the 
rich Claypaky range, has been designed and made with 
total quality to ensure excellent performance and best 
meet your expectations and requirements.
INDEX
 
ENGLISH 
Page Contents 
2 1. Safety information 
3 2. Unpacking and preparation 
4 3. Installation and start-up 
43.1 Installing the fixture 
4 3.2 Connecting to manis supply 
5 3.3 Connecting the control signal line: DMX / Art-Net 
5 3.4 Switching on the fixture and basic SetUp 
7 4. Maintenance 
74.1 Opening the covers 
84.2 Periodical cleaning 
9 4.3 Effects module removal 
14 4.4 Cleaning of the filters 
16 4.5 Battery removal 
17 4.6 Frost filter removal 
17 4.7 Accessories 
18 5. Dimensions
AXCOR WASH 600 
AXCOR WASH 600 HC
CL3000 
 
CL3001

AXCOR WASH 600 - 600 HC

SAFETY INFORMATION

IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also

available in digital format at the following link:

www.claypaky.com

Ref: [FIS00W - Safety Information Axcor 600 series]

INFORMAZIONI DI SICUREZZA

IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative

a questo prodotto, sempre reperibili in versione digitale al seguente link:

www.claypaky.com

Rif: [FIS00W - Safety Information Axcor 600 series]

INFORMATIONEN ZUR SICHERHEIT

WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und

aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:

www.claypaky.com

Ref: [FIS00W - Safety Information Axcor 600 series]

INFORMACIONES DE SEGURIDAD

IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este

producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

www.claypaky.com

Ref: [FIS00W - Safety Information Axcor 600 series]

CONSIGNES DE SÉCURITÉ

IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à

ce produit, disponibles en version digitale au lien suivant:

www.claypaky.com

Réf. : [FIS00W - Safety Information Axcor 600 series]

ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

ВАЖНО: Claypaky рекомендует внимательно прочитать и сохранить инструкцию по технике безопасности

данного изделия, которая всегда доступна в электронном формате по следующей ссылке:

www.claypaky.com

Наименование: [FIS00W - Safety Information Axcor 600 series]

1. SAFETY INFORMATION

AXCOR WASH 600 - 600 HC

PAN Mechanism Lock and Release (every 90°) -Fig. 2

TILT Mechanism Lock and Release (every 45°) -Fig. 3

Packing contents - Fig. 1

90°

UNLOCKED

LOCKED

45°

2 x 183102/805

2. UNPACKING AND PREPARATION

2 3

AXCOR WASH 600 - 600 HC

3. INSTALLATION AND START-UP

Connecting and disconnecting power cable - Fig. 5

Installing the projector - Fig. 4

The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.

WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/001 available on request).

This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.

3.1 Installing the fixture

3.2 Connecting to manis supply

AXCOR WASH 600 - 600 HC

Switching on the projector - Fig. 8

Press the switch. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Model Firmware xxx (Fixture ID) System errors

Axcor Version X.X.X Dmx Address xxx E: .........................

600 Date - Hour W: .........................

On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control panel

(Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two conditions:

rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address and the Fixture ID address (if set).

During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.

It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

key will be cancelled.

Dmx Address

Warning Message

Fixture ID

Connecting to the control signal line (DMX) - Fig. 7

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use

microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 3 or 5 pin male/female

connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.

IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the

shield braid and to pin 1 of the connectors.

Connecting to the mains supply - Fig. 6

SIGNAL

SCREEN

DMX 512

5 PIN

SIGNAL

SCREEN

DMX 512

3 PIN

SIGNAL

Mains

Continue ‘

3.3 Connecting the control signal line: DMX / Art-Net

3.4 Switching on the fixture and basic SetUp

AXCOR WASH 600 - 600 HC

Reversal of the display - Fig. 9

To activate this function, press UP

and DOWN

keys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

Setting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).

The address can also be set with the projector switched off.

Setting the projector Fixture ID

On each projector, the Fixture ID address must be set for an easy identification of the fixtures in an installation (ID from 1 to 255).

The Fixture ID address can be set with the projector switched off.

Functions of the buttons - Using the menu

Setting addresses and options with the projector disconnected

The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.

All that is needed is to press

to momentarily activate the display and thus access the settings. Once the required operations have been carried out,

the display will switch off again after a wait time of 30 seconds.

USING THE MENU:

1) Press

once – “Main Menu” appears on the display.

2) Use the UP

and DOWN

keys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• Informations (Informations Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functionning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.

3) Press

to display the first item in the selected menu.

4) Use the UP

and DOWN

keys to select the MENU items.

Confirms the displayed value, or activates the displayed function, or enters the successive

menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level

Commute from units, tens, hundreds, in the "Address", "Fixture ID" and "Calibration" menù.

DOWN

LEFT

RIGHT

AXCOR WASH 600 - 600 HC

Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section.

Opening the head covers - Fig. 10.

Closing the head covers - Fig. 11.

1/4 Turn

11/4 Turn

1/4 Turn

CLICK!!

10 11

Continue ‘

4. MAINTENANCE

4.1 Opening the covers

Upper side

AXCOR WASH 600 - 600 HC

Periodical cleaning - Fig. 12

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The

frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the

working environment (air humidity, presence of dust, salinity, etc.).

Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended

that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:

•General cleaning of internal parts.

•Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.

•General visual check of the internal components, cabling, mechanical parts, etc.

•Electrical, photometric and functional checks; eventual repairs.

NOTE: keep a careful cleaning

of the ''CMY/colour filters assembly''

to prevent rapid deterioration.

Light collimation system

This product contains internal light

collimation system. Avoid intense

light from any angle.

4.2 Periodical cleaning

AXCOR WASH 600 - 600 HC

Upper side

Extraction of the effect modules: Preliminary operations - Fig. 13.

NOTE:

- Do not disconnect wiring harnesses when the fixtures is switched-on, to avoid to damage electronic boards.

- Do not switch-on the fixtures with wiring harness disconnected.

Continue ‘

4.3 Effects module removal

AXCOR WASH 600 - 600 HC

Lower side

Upper side

Extraction of the effect modules: Preliminary operations - Fig. 14.

NOTE:

- Do not disconnect wiring harnesses when the fixtures is switched-on, to avoid to damage electronic boards.

- Do not switch-on the fixtures with wiring harness disconnected.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Claypaky

Claypaky

Claypaky ALPHA SPOT HPE 300 Manual de usuario

Claypaky

Claypaky MYTHOS Manual de usuario

Claypaky

Claypaky ALPHA SPOT 1200 Manual de usuario

Claypaky

Claypaky Tiger C.C. HMI 575 Manual de usuario

Claypaky

Claypaky STAGE LIGHT 300 Manual de usuario

Claypaky

Claypaky Alpha Spot 575 HPE Manual de usuario

Claypaky

Claypaky MINISCAN HP3 Manual de usuario

Claypaky

Claypaky C61769 Manual de usuario

Claypaky

Claypaky C71050 Manual de usuario

Claypaky

Claypaky STAGE LIGHT 300 AE Manual de usuario

Claypaky

Claypaky HMI 1200W Manual de usuario

Claypaky

Claypaky Odeon Flood Series Manual de usuario

Claypaky

Claypaky DISPLAY LINE C52116 Manual de usuario

Claypaky

Claypaky Shary Manual de usuario

Claypaky

Claypaky HMI 575 Manual de usuario

Claypaky

Claypaky MINI-B SPOT Manual de usuario

Claypaky

Claypaky C52162 Manual de usuario

Claypaky

Claypaky Alpha Spot HPE 1200 Manual de usuario

Claypaky

Claypaky C61067 Manual de usuario

Claypaky

Claypaky C61375 Manual de usuario

Claypaky

Claypaky ALPHA PROFILE 1500 C61330 Manual de usuario

Claypaky

Claypaky HY B-EYE K15 Manual de usuario

Claypaky

Claypaky AROLLA PROFILE MP Manual de usuario

Claypaky

Claypaky C61335 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario