Claypaky MINI-B SPOT Manual de usuario

INSTRUCTION MANUAL

Congratulations on choosing a Claypaky product!

We thank you for your custom.

Please note that this product, as all the others in the

rich Claypaky range, has been designed and made with

total quality to ensure excellent performance and best

meet your expectations and requirements.

INDEX

ENGLISH

age Contents

2 1. Safety information

3 2. Unpacking and preparation

4 3. Installation and start-up

4 3.1 Installing the fixture

5 3.2 Connecting to manis supply

5 3.3 Connecting the control signal line: DMX / Art-Net

6 3.4 Switching on the fixture and basic SetUp

8 4. Maintenance

8 4.1 Opening the covers

9 4.2 Periodical cleaning

10 4.3 Rotating gobos

11 4.4 Battery removal

12 5. Dimensions

12 6. Cause and solution of problems

CL3025

MINI-B SPOT

SAFETY INFORMATION

IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also

available in digital format at the following link:

www.claypaky.com

Ref: FIS02K - Safety information Mini-B Spot

INFORMAZIONI DI SICUREZZA

IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative

a questo prodotto, sempre reperibili in versione digitale al seguente link:

www.claypaky.com

Rif: FIS02K - Safety information Mini-B Spot

INFORMATIONEN ZUR SICHERHEIT

WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und

aufzubewahren. Sie sind in Digitalversion immer unter folgendem ink auffindbar:

www.claypaky.com

Ref: FIS02K - Safety information Mini-B Spot

INFORMACIONES DE SEGURIDAD

IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este

producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

www.claypaky.com

Ref: FIS02K - Safety information Mini-B Spot

CONSIGNES DE SÉCURITÉ

IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à

ce produit, disponibles en version digitale au lien suivant:

www.claypaky.com

Réf. : FIS02K - Safety information Mini-B Spot

ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

ВАЖНО: Claypaky рекоменд ет внимательно прочитать и сохранить инстр кцию по технике безопасности

данного изделия, которая всегда дост пна в электронном формате по след ющей ссылке:

www.claypaky.com

Наименование: FIS02K - Safety information Mini-B Spot

1. SAFETY INFORMATION

MINI-B SPOT

acking contents - Fig. 1

2. UN ACKING AND RE ARATION

MINI-B SPOT

3. INSTALLATION AND START-U

Installing the projector - Fig. 2

The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.

WARNING: with th xc ption of wh n th proj ctor is position d on th floor, th saf ty cabl must b fitt d. (Cod. 105015/802 availabl on r qu st).

This must b s cur ly fix d to th support structur of th proj ctor and th n conn ct d to th fixing point at th c ntr of th bas .

3.1 Installing the fixture

Fuse

Display User buttons Power IN Power OUT Ethernet

DMX IN

(5 pin)

DMX THRU

(5 pin)

Control panel - Fig. 3

MINI-B SPOT

Connecting and disconnecting power cable - Fig. 4

3.2 Connecting to manis supply

Connecting to the mains supply - Fig. 5

Mains

Connecting to the control signal line (DMX) - Fig. 6

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use

microphone cable or other cable with characteristics differing from those specified. The end connections must be made using X R type 5 pin male/female

connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.

IM ORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the

shield braid and to pin 1 of the connectors.

SIGNAL

SCREEN

DMX 512

5 PIN

SIGNAL

3.3 Connecting the control signal line: DMX / Art-Net

Continue ‘

Reversal of the display - Fig. 8

To activate this function, press UP

and DOWN

keys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

Setting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).

The address can also be set with the projector switched off.

MINI-B SPOT

Switching on the projector - Fig. 7

Switch-on the fixture. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Mini-B Firmware Dmx Address xxx

Spot Version X.X.X

Date - Hour

On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control panel

(Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two conditions:

rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address.

During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.

It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

key will be cancelled.

Dmx Address

Warning Message

3.4 Switching on the fixture and basic SetUp

MINI-B SPOT

Functions of the buttons - Using the menu

Setting addresses and options with the projector disconnected

The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.

All that is needed is to press

RIGHT

to momentarily activate the display and thus access the settings. Once the required operations have been

carried out, the display will switch off again after a wait time of 30 seconds.

USING THE MENU:

1) Press EFT

once – “Main Menu” appears on the display.

2) Use the UP

and DOWN

keys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• Informations (Informations Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functionning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.

3) Press

to display the first item in the selected menu.

4) Use the UP

and DOWN

keys to select the MENU items.

Confirms the displayed value, or activates the displayed function, or enters the successive

menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level

Enters the successive menu.

DOWN

EFT

RIGHT

MINI-B SPOT

Locking and releasing an and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section.

Opening the head covers - Fig. 9.

Closing the head covers - Fig. 10.

9 10

4. MAINTENANCE

4.1 Opening the covers

Lower side

Upper side

MINI-B SPOT

eriodical cleaning - Fig. 11

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The

frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the

working environment (air humidity, presence of dust, salinity, etc.).

Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended

that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:

•General cleaning of internal parts.

•Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.

•General visual check of the internal components, cabling, mechanical parts, etc.

•Electrical, photometric and functional checks; eventual repairs.

4.2 eriodical cleaning

Continue ‘

NOTE: keep a careful cleaning

of the ''colour filters assembly''

to prevent rapid deterioration.

Light collimation system

This product contains internal

light collimation system. Avoid

intense light from any angle.

MINI-B SPOT

1.1

ø15.9

ø12.5

Gobo 2

Gobo 3

Gobo 4

Gobo 1

Gobo 5

Gobo 6

Gobo 7

INDEX

Replacing rotating gobos (ø 15.9 mm – max 12.5 mm image – thickness 1.1 mm) - Fig. 13

- The rotating gobo wheel only use dichroic glass gobos (it is not possible to use metal gobos);

- For more information contact Claypaky;

Bearing group replacement - Fig. 12

4.3 - Rotating gobos

Gobo orientation - Fig. 14

The pictures shown the correct gobos orientation.

GOBO DI VETRO DICROICI TIPO 1 GOBO DI VETRO DICROICI TIPO 2

To determine which side of a godo is coated, hold an odject up to it. On the

uncoated side, there is a space between the object and its reflection.

COATED GLASS GOBOS TY E 1 COATED GLASS GOBOS TY E 2

Black side away

from light source

Coated side towards

light source

Coated side

Uncoated side

Reflective/Grey side towards light source

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Claypaky

Claypaky

Claypaky IGLOO EASY - C61198 Manual de usuario

Claypaky

Claypaky HMI 575 Manual de usuario

Claypaky

Claypaky AXCOR BEAM 300 Manual de usuario

Claypaky

Claypaky STAGE LIGHT 300 Manual de usuario

Claypaky

Claypaky STAGE COLOR 300 Manual de usuario

Claypaky

Claypaky SINFONYA PROFILE 600 Manual de usuario

Claypaky

Claypaky C61044 Manual de usuario

Claypaky

Claypaky C61375 Manual de usuario

Claypaky

Claypaky SPHERISCAN C11260 Manual de usuario

Claypaky

Claypaky COMBICOLOR 300 Manual de usuario

Claypaky

Claypaky ALPHA SPOT HPE 1500 ST Manual de usuario

Claypaky

Claypaky GLOW UP STRIP 100 Manual de usuario

Claypaky

Claypaky C61408 Manual de usuario

Claypaky

Claypaky C71050 Manual de usuario

Claypaky

Claypaky HY B-EYE K15 Manual de usuario

Claypaky

Claypaky C52162 Manual de usuario

Claypaky

Claypaky ALPHA PROFILE 1500 C61330 Manual de usuario

Claypaky

Claypaky STAGE COLOR 300 AE Manual de usuario

Claypaky

Claypaky PIN SCAN Manual de usuario

Claypaky

Claypaky C52143 Manual de usuario

Claypaky

Claypaky Arolla Spot MP Manual de usuario

Claypaky

Claypaky A.LEDA WASH K10 Manual de usuario

Claypaky

Claypaky Tiger C.C. HMI 575 Manual de usuario

Claypaky

Claypaky DISPLAY LINE C52116 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario