Clas Ohlson RC8030 Manual de usuario
ENGLISH
Wireless IP Camera
Article number 36-2914 Model RC8030
18-2062 RC8030-UK
3
ENGLISH
Wireless IP Camera
Article number 36-2914 Model RC8030
18-2062 RC8030-UK
Please read the entire instruction manual before using the product and save it for future
reference. We apologise for any text or photographic errors and any changes of techni-
cal data. If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse).
Table of Contents
1. Safety 3
2. Product Description 4
3. Features 5
4. Mounting and installation 6
5. Basic Setup 7
6. Show the camera image via the web browser 11
7. Conguration via the web browser 12
8. Advanced use 27
9. Monitor Manager 30
10. Care and Maintenance 40
11. Troubleshooting 40
12. Disposal 40
13. Specications 40
1. Safety
• The camera is for indoor use only.
• Use only the supplied or recommended power adaptor (5 V DC).
• Never expose the camera to moisture or humidity.
• Always disconnect the camera from the electricity network before cleaning.
• Never dismantle the camera. Certain parts inside the casing carry dangerous
currents. Touching these can give you an electric shock.
4
ENGLISH
2. Product Description
2.1 Features
Wireless IP camera with motor with the possibility to control the camera from
another computer.
• 126° (horizontal) + 64° (vertical) panorama angle.
CMOS Picture sensor.
The MPEG 4 technology offers high video quality but reduced band width
directly to pc.
Built-in microphone and connector for speakers for two-way communication
between computer and camera.
Software programme for conguration, monitoring, and recording.
Conguration via installation guide.
Alarm and recording during motion detection.
Scheduled recording.
•
•
•
•
•
•
•
Internet functions
• Denable http-port Allows the user to pick a port for access
via the Internet.
• Support for DDNS (Dynamic DNS) Function for updates against a Dynamic
DNS-server.
• NTP (Network Time Protocol) Synchronization of the clock against
an Internet time server.
Safety Features
• User verication The camera can be password protected for
up to 20 users.
• Password protected conguration Prevents unauthorized change of the
camera’s properties.
ENGLISH
2.2 System requirements
• Network connected PC with Windows 2000 or XP
• Microsoft Internet Explorer 6.0 or later
• Router/Wireless access point
2.3 The package contains
• Network camera with aerial
• Power adaptor (5 V DC)
• Installation disc
• Instruction manual
3. Features
3.1 Front of camera
Camera lens The camera lens can be adjusted. However make sure that it is free from dirt and
dust to obtain the best image.
Microphone The built-in microphone is located on the front of the camera. There is also a socket
on the back of the camera for an extra microphone. When an external microphone
is connected the internal microphone is disconnected.
POWER LEDs illuminate when the camera is turned on.
When the camera starts the LEDs ash for 15-20 seconds.
ACTIVE When the LEDs ash, the camera image is transferred in real time to one or several
users.
NETWORK LEDs are lit when the camera is connected to a network.
The LEDs ash when data is transmitted on the network.
3.2 Back of camera
Power input Connection for the supplied power adaptor.
MIC In Connection (3.5 mm) for external microphone (e.g. a regular pc microphone).
The camera’s built-in microphone is automatically disconnected when an external
microphone is connected.
LAN Use a standard network cable to connect the camera to your network switch
or router.
N.B.
• When a network cable is connected the wireless network (WLAN) is
automatically disconnected.
• The power adaptor must always be disconnected before you connect or disconnect
the network cable for the camera to be able to change between LAN or WLAN.
RESET The reset button has two functions:
• A quick press restores the camera to a DHCP client (the camera obtains an IP
address from e.g. a router. Any personal congured IP address is removed).
• A long press (press and hold in for 3 seconds) restores the IP address,
administrator’s name and the administrator’s password. The LED (Power) blinks
three times when the camera is restored.
• IP address: DHCP
• Administrator’s name: administrator
• Administrator’s password: (no password)
SPEAK Connection for speakers (3,5 mm).
6
ENGLISH
4. Mounting & Installation
1. Mounting the aerial
Attach the supplied aerial to the bracket on top of the camera. The aerial can be
angled for the best possible reception. The best reception is obtained with the aerial
angled vertically.
2. Mounting the camera
Mount the camera on the included table stand. The table stand can also be ceiling
or wall mounted.
3. Connecting the network cable
Use a standard network cable for the LAN connection to connect the camera
to your network switch or router.
N.B. You must rst connect the camera with the network lead in order to
congure the camera for the wireless network. You can remove the network
lead after conguration.
4. Switching on the camera
Connect the supplied power adaptor to the outlet marked POWER. The camera
starts up automatically. Use only the included or recommended adaptor.
5. LED Indicators
• POWER - At start-up the indicator is lit for a short while before it begins
ashing for 15-20 seconds. The indicator then remains lit.
• ACTIVE - Lights only when video is transmitted in real time to one or
several users.
• NETWORK - Lights when the camera is connected to the network.
ENGLISH
3. When the installation
programme has started
a welcome screen is displayed.
Click on Setup Camera to start
the installation.
If there is more than one
camera in the network,
select the rst camera on
the list and click ►.
. Basic Setup
.1 Conguring the camera
The camera must rst be congured before using.
These installation instructions apply to Windows XP with Service pack 2 installed.
1. Connect the camera according to the instructions in section 4.
2. Insert the supplied CD into the computer’s CD-ROM drive. If the installation does
not start automatically, use the le NetworkCamera.exe application found directly
under the root folder on the CD-ROM.
4. The installation programme searches for the camera on the network and then
displays the camera on the list to the left.
8
ENGLISH
• On the next screen you will be prompted to enter a user name and password.
Then click ►.
The preset username and password are:
User name: administrator
Password: (no password)
5. In the following dialogue box you will set the time zone and date. You can also give
a name and description for the camera. Enter your settings and click ►.
9
ENGLISH
6. Select the camera to use a xed IP address (Fixed IP address) or to automatically
obtain an IP address (Dynamic IP address) from e.g. a router with DHCP function.
Make your selection and click ►.
7. If you have previously chosen to give the camera a xed IP address the TCP/IP
Settings will appear in the dialogue box.
• Enter an available IP address, Subnet Mask and Default Gateway for
your network.
• Fill in a Primary DNS and a Secondary DNS if you wish to use the e-mail and
DNS functions. Refer to the information provided by your Internet service provider.
• Click ► next to continue.
N.B. Write down the IP address; you will need it later to congure the camera.
10
ENGLISH
8. The following dialogue box shows the settings you have just entered. Click ►.
9. Click OK to save and then OK again.
10. Click Exit to complete the installation.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara IP de Clas Ohlson
