Cisco SLM224G4S Manual de instrucciones

Cisco Small Business

SLM Smart Switches

ADMINISTRATION

GUIDE

CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco Ironport, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect,

Cisco Stackpower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for

Good, Flip Mino, Flip Video, Flip Video (Design), Flipshare (Design), Flip Ultra, and Welcome to the Human Network are trademarks;

Changing the Way We Work, Live, Play, and Learn, Cisco Store, and Flip Gift Card are service marks; and Access Registrar, Aironet,

AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified

Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration

Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet

Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime

Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase,

SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are

registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not

imply a partnership relationship between Cisco and any other company. (0907R)

Contents

Cisco Small Business SLM Smart Switches Administration Guide 1

Contents

Chapter 1: Getting Started 1

Starting the Application 1

The About Window 2

Setup 3

Summary 3

Network Settings 5

Time 7

Chapter 2: Port Management 12

Port Settings 12

Link Aggregation 17

LACP 22

PoE Power Settings 23

Chapter 3: VLAN Management 25

Create VLAN 25

Port Setting 27

Port to VLAN 28

VLAN to Port 30

Chapter 4: Statistics 32

Interface Statistics 32

Chapter 5: Security 36

802.1x Settings 36

Port Security 38

IP Access List 41

Storm Control 42

RADIUS 44

Contents

Cisco Small Business SLM Smart Switches Administration Guide 2

Chapter 6: Quality of Service 46

CoS Settings 47

Queue Settings 49

DSCP Settings 51

Basic Mode 52

Chapter 7: Spanning Tree 54

STP Status 54

Global STP 56

STP Port Settings 58

Chapter 8: Multicast 62

IGMP Snooping 62

Bridge Multicast 64

Bridge Multicast Forward All 66

Chapter 9: Admin 68

User Authentication 68

Static Address 70

Dynamic Address 72

Port Mirroring 74

Save Configuration 75

Firmware Upgrade 77

Reboot 79

Factory Default 80

Logging 81

Memory Logs 82

Flash Logs 83

Defining Bonjour 84

Getting Started

Starting the Application

Cisco Small Business SLM Series Smart Switches Administration Guide 1

Getting Started

Thank you for choosing the Cisco Small Business Series Smart Gigabit Ethernet

Switch. The Smart Gigabit Ethernet Switches are cost-effective switching

solutions ideal for small businesses, the network edge, or workgroups within

larger organizations. These easy-to-install, high speed switches offer many of the

same Quality of Service and Security features found in more expensive full Layer 2

managed switches but without their complexity. The Smart Switches offer the

following interfaces:

•The SLM2024 and SLM2048 offer twenty four (24) or forty eight (48)

Gigabit copper ports, with two (2) shared copper or optical (SFP) uplink

interfaces for connecting the switch to the core network.

•The SLM224G, SLM224P, SLM248G, and SLM248P offer twenty four (24) or

forty eight (48) 10/100 copper ports, with two (2) shared Gigabit copper or

optical (SFP) uplink interfaces for connecting the switch to the core

network.

The Smart Switch’s simplified user interface is an intuitive management tool

enabling you to quickly utilize the comprehensive feature-set of the switch,

resulting in a better optimized network. The user interface is a web based

application that uses Microsoft Internet Explorer 6.0 or later, or Firefox 5.0 or later.

Starting the Application

To open the User Interface:

STEP 1 Open a web browser.

NOTE The default IP address is 192.168.1.254. If you have changed the IP address

or are using DHCP to assign it, enter the new IP address instead. The

computer you use for configuration should be on the same subnet as the

Switch.

Getting Started

Starting the Application

Cisco Small Business SLM Series Smart Switches Administration Guide 2

STEP 2 Enter the device’s IP address in the address bar and press Enter. The

window opens:

When the

window initially loads, both the Username and Password fields

are empty. Enter a Username and Password and click Log In. The default user

name is admin. The default password is admin. Passwords are alpha-numeric and

case-sensitive.

While the system is verifying the login attempt, the Login Progress Indicator

appears. If the login attempt is successful, the Summary page opens.

The About Window

Click About in the top right corner of any window to display the

About

window.

This window displays the device name and version number.

Getting Started

Setup

Cisco Small Business SLM Series Smart Switches Administration Guide 3

About

Setup

The Setup configuration options are as follows:

•Summary

•Network Settings

•Time

Summary

The

Summary

window displays general device information and parameters.

To open the Summary window:

Getting Started

Setup

Cisco Small Business SLM Series Smart Switches Administration Guide 4

STEP 1 Click Setup > Summary. The

Summary

window appears:

Summary

The

Summary

window contains the following fields:

•System Name — Displays the user-configured name of the system, which is

configured in the

Network Settings

window.

•IP Address — Displays the device IP address.

•Subnet Mask — Displays the configured IP subnet mask.

•DNS Server — Displays the DNS server’s IP address.

•Default Gateway — Displays the device’s Gateway IP address.

•Address Mode — Displays the IP address mode using DHCP or Static. The

possible field values are:

DHCP

— Retrieves the IP addresses using DHCP.

Static

— The IP address is statically defined.

•Base MAC Address — Displays the device’s MAC address.

Getting Started

Setup

Cisco Small Business SLM Series Smart Switches Administration Guide 5

•Jumbo Frame — Enables Jumbo Frames on the device (packet size of up to

9k is supported).Jumbo Frames enable the transportation of data in fewer

frames. This ensures less overhead, lower processing time, and fewer

interruptions.

NOTE The Jumbo Frame Setting applies only to SLM2024 and SLM2048 Smart

Switches. Other Smart Switches do not support this feature.

The possible field values are:

Enable

— Switch will recognize and forward Jumbo Frames.

Disable

— Switch will not recognize or forward Jumbo Frames.

•Model Name — Displays the device model name.

•Hardware Version — Displays the hardware version number.

•Boot Version — Indicates the system boot version currently running on the

device.

•Firmware Version — Displays the firmware / software version.

•System Location — Displays the location where the system is currently

running.

•System Contact — Displays the name of the contact person.

•System Up Time — Displays the amount of time that has elapsed since the

last device reset. The system time is displayed in the following format:

Days, Hours, Minutes and Seconds. For example: 41 days, 2 hours, 22

minutes and 15 seconds.

•Current Time — Displays the current time and date.

Network Settings

The

Network Settings

window allows you to edit many of the fields on the

Summary

window where they cannot be edited.

To open the

Network Settings

window:

Getting Started

Setup

Cisco Small Business SLM Series Smart Switches Administration Guide 6

STEP 1 Click Setup > Network Settings. The

Network Settings

window appears:

Network Settings

The

Network Settings

window contains the following fields:

•System Name — Defines the user-defined system name.

•System Location — Defines the user-defined system location, for example,

3rd floor.

•System Contact — Defines the user-defined system contact person.

•Base MAC Address — Displays the MAC address.

•Management VLAN — Selects the management VLAN. The default is 1.

•IP Address Mode — Retrieves the IP address mode using DHCP or Static.

The possible field values are:

DHCP

— Retrieves the IP addresses using DHCP.

Static

— The IP addresses are statically defined. If

Static

is selected the

IP Address, Subnet Mask, and Default Gateway fields are available.

•IP Address — Defines the system IP address.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Cisco

Cisco

Cisco Nexus 7706 Manual

Cisco

Cisco AJ732A - MDS 9134 Fabric Switch Manual de usuario

Cisco

Cisco Catalyst 3920 Manual de usuario

Cisco

Cisco Catalyst 2900 Series XL Manual del operador

Cisco

Cisco Catalyst 3120G Instrucciones de uso

Cisco

Cisco Nexus 93108TC-FX3P Manual

Cisco

Cisco 9124 - mds multilayer fabric switch Manual de usuario

Cisco

Cisco Network Switch Cabling Manual de usuario

Cisco

Cisco ME 3400 Series Manual de funcionamiento

Cisco

Cisco Catalyst 3750G-16TD Manual

Cisco

Cisco Cisco mds 9124 - fabric switch Manual de usuario

Cisco

Cisco Nexus 2000 Series Guía de referencia rápida

Cisco

Cisco Nexus 7000 Series Guía

Cisco

Cisco Linksys BUSINESS Series Manual de usuario

Cisco

Cisco C9200CX-8P-2X2G-A Manual

Cisco

Cisco Catalyst C9200L-48PXG-4X-E Manual

Cisco

Cisco Catalyst PON Series Manual

Cisco

Cisco SD205 Manual de usuario

Cisco

Cisco Catalyst 2960 Series Manual de usuario

Cisco

Cisco Catalyst 3850 Guía de referencia rápida

Cisco

Cisco VCO/4K Manual de usuario

Cisco

Cisco Nexus B22HP Guía

Cisco

Cisco Nexus 9364C-GX Manual

Cisco

Cisco CATALYST 6000 Guía rápida

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario