Cisco MS420-24 Manual de usuario

MS420 Series (EOS) Installation Guide

On Aug 1, 2016, Cisco Meraki announced the end-of-sale date for the MS420 series switch will be

Oct 31, 2016. The end-of-support date is Oct 31, 2023.

Read more about our Product End-of-Life (EOL) Policy.

Models

Model number Description

MS420-24

Layer-3 24-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

MS420-48

Layer-3 48-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

Package contents

In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):

MS420-24 Series front panel

MS420-48 Series front panel

MS420 Series back panel

Power input The MS comes standard with US power cord. EU/

UK/AU power cords may be ordered separately.

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, the main LED will be amber.

Additional functions are described below, from left to right.

Item Function LED Status Meaning

1 Restore N/A

Restore button to clear

switch IP and local

configuration settings

2 Fan Orange

One or more of the

system fans has

malfunctioned or is

missing

3 Power (PSU) Orange

One of the system

PSUs (power supplies)

has malfunctioned or is

missing

2Status Orange

Switch is unable to or

has not yet connected

to the Meraki cloud

Flashing green Firmware upgrade in

process

White

Switch is fully

operational and

connected to the

Meraki cloud

Alternating

Switch is booting,

searching for uplink to

Meraki Cloud

Off Switch does not have

power

3 Switch Port LEDs Off No client connected

Solid orange 10/100/1000 Mbps

Solid green 10,000 Mbps (10Gbps)

In addition, there is a RESTORE button available on the front panel.

Insert a paper clip if a restore is required.

• A brief, momentary press: To delete a downloaded configuration and reboot.

• Press and hold for more than 10 sec: To force the unit into a full factory restore.

Management Port

This port is designed to access the local switch configuration page only. For more information on local configuration,

please see Local Configuration.

The management port can not be used as a standard switched port

The MS420 series will ship with all accessories, including fans and two power supplies. Additional accessories, including

fans and power supplies, can be purchased separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Bringing your Stack Online

When connecting up your MS420 for the first time the ports are set as ethernet. Once they're online you can convert the

port to a Stack port by simply selecting the option under the interface configuration as shown below:

It's recommended to bring the MS420's online using an uplink on each switch and configuring the port for Stacking prior

to connecting the stack links. This will allow for config sync as well as firmware upgrade. The switches will blink a white

status LED during upgrade so it should be visibly obvious that they're upgrade. When the Switch has a steady White

Light it's connected and ready to continue so the stacking connections can be added.

Mounting hardware

The mounting hardware includes a rack mount rail kit for standard 1U racks. When installing the device, make sure that

there is sufficient space between the rear of the rack and other obstacles to ensure adequate airflow.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Cisco

Cisco

Cisco Nexus 5548P Manual de usuario

Cisco

Cisco MDS 9000 Series Manual de instalación

Cisco

Cisco Catalyst 4500e Series Manual de usuario

Cisco

Cisco Cisco Small Business Unmanaged Switch SD208 Manual de usuario

Cisco

Cisco MEM-S2-512MB= notes Guía de inicio rápido

Cisco

Cisco MDS 9000 Series Manual de usuario

Cisco

Cisco Catalyst 3920 Manual de usuario

Cisco

Cisco SR2024 - Small Business Unmanaged Switch Manual de usuario

Cisco

Cisco Nexus 93360YC-FX2 Manual

Cisco

Cisco Catalyst 3850 Manual de usuario

Cisco

Cisco MGX 8950 Instrucciones de funcionamiento y seguridad

Cisco

Cisco MDS 9000 Series Manual de usuario

Cisco

Cisco Catalyst 3550 Manual de usuario

Cisco

Cisco SLM2008 - Small Business Smart Switch Manual de usuario

Cisco

Cisco Linksys EZXS55W Manual de usuario

Cisco

Cisco SRW2048 - Small Business Managed Switch Manual de usuario

Cisco

Cisco MDS 9220i Manual de usuario

Cisco

Cisco NCS 4200 Series Manual de usuario

Cisco

Cisco BTS 10200 Manual de usuario

Cisco

Cisco Catalyst 6840 Series Instrucciones de funcionamiento

Cisco

Cisco IE3400H Guía

Cisco

Cisco Catalyst 9300 Series Manual de instrucciones

Cisco

Cisco Cisco Line Card 4500 E-Series Manual de usuario

Cisco

Cisco 3750 - Catalyst EMI Switch Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario