Cisco SPA50 Series Manual de usuario
Getting Started
Understanding Your Phone Lines and Buttons
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 9
1
Understanding Your Phone Lines and Buttons
The parts of a SPA509G IP phone are shown in Figure 1. Other models are similar,
but might vary.
Figure 1 SPA509G Phone Components
Numbered objects in Figure 1 described in the following table.
#Phone Feature Description
1 Handset Pick up to place or answer a call.
2Message Waiting
indicator
Displays solid red when you have a new voice mail
message. Blinks red during an incoming call.
3IP phone screen Displays date and time, phone station name, line
extensions, and softkey options (except on the
Cisco SPA501G).
Getting Started
Understanding Your Phone Lines and Buttons
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 10
1
4 Line keys Indicates phone line status. (Not available on the
Cisco SPA502G or Cisco SPA512G.)
When lit:
Green: Line is idle.
Red (steady): Line is active or in use.
Red (flashing): Line is on hold or there is an inbound call.
Orange: Line is unregistered (cannot be used).
These keys can also be programmed by your system
administrator to perform differently than described here
or to add functions such as speed dial, call pickup, or
monitor an extension.
5Softkey buttons Press a softkey button to perform the action shown on
the label on the IP phone screen.
Note: The Cisco SPA501G has the following four buttons:
Redial—Dials the last number called.
Cancel—Cancels an action (such as a transfer).
Conference—While on a call, press to start a
conference call and dial another number. After
the second party answers, press Conference again to
create the conference.
Transfer—Transfers a call.
6Navigation button Press an arrow key to scroll left, right, up, or down
through items shown on the IP phone screen (except
on the Cisco SPA501G).
7Messages button Press to access voice mail. (This feature must be set up
by your phone system administrator).
8 Hold button Press to place a call either on hold or to resume.
NOTE SPA501 phone does not support this feature.
#Phone Feature Description
Getting Started
Understanding Your Phone Lines and Buttons
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 11
1
Softkey Buttons
The softkey buttons on your phone display might vary depending on your phone
model and the phone system setup. (Softkey buttons are not available on the
Cisco SPA501G.) Press the Right Arrow or Left Arrow keys on the navigation
button to view additional softkey buttons.
Below is a partial listing of softkey buttons that might be available on your phone.
You might not have all of these softkey buttons on your phone, and you might have
additional buttons that are not listed here, as your phone administrator might
provide custom softkey buttons on your phone, such as a speed dial to a company
number, or a specialized program that runs on your phone. Contact your phone
administrator for more information.
9Setup button Press to access a menu to configure features and
preferences (such as your directory, status, and speed
dials), access your call history, set up functions (such as
call forwarding), and provide phone status information.
For the Cisco SPA501G, press Setup to access the
Interactive Voice Response (IVR) menu that allows you to
perform tasks such as getting the IP address of the
phone.
10 Mute button Press to mute or unmute the phone. When phone is
muted, the button is lit red. A blinking or steady red mute
button indicates the network connection cannot be
found.
11 Volume button Press + to increase the volume and - to lower the volume
of the handset, headset, speaker when the phone is off-
hook, or ringer volume when the phone is on-hook.
12 Headset button Push to turn the headset on or off. When the headset is
on, the button is lit green.
13 Speaker button Push to turn the speaker on or off. When the speaker is
on, the button is lit green.
14 Keypad Use to dial phone numbers, enter letters, and choose
menu items.
#Phone Feature Description
Getting Started
Understanding Your Phone Lines and Buttons
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 12
1
Button Function
<< or >> Move left or right through an entry without deleting characters.
activ Activates screen saver mode.
add Add an entry.
bXfer Performs a blind call transfer (transferring a call without speaking to the
party to whom you are transferring the call.)
cancel Cancels any changes you have made. (Press before ok or save.)
cfwd Forwards all calls coming to your phone to a specified number.
-cfwd Clears call forwarding.
conf Initiates a conference call.
confLx Conferences active lines on the phone together.
delChr Deletes the last number or letter.
delete Deletes an entire item (for example, a number from the Call History list).
dial Dials a number.
dir Accesses phone directories.
dnd Do Not Disturb; prevents incoming calls from ringing your phone.
-dnd Clears Do Not Disturb.
edit Opens an item so that you can edit numbers or letters, or enable or
disable a feature.
grPick Allows you to answer a call ringing on an extension by discovering the
number of the ringing extension.
ignore Ignores an incoming call.
lcr Dials the Last Call Received.
miss Shows the Missed Calls list.
park Puts a call on hold at a designated “park” number. The call is parked on
the line until you unpark it or the caller disconnects. Must be configured
by your phone system administrator.
Getting Started
Understanding Your Phone Lines and Buttons
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 13
1
Using Keypad Shortcuts
When using the phone menus, you can use the keypad to enter the number shown
next to the menu or sub-menu item on the IP phone screen. (Not applicable to the
Cisco SPA501G.)
For example, to obtain your IP address on the Cisco SPA 504G, press the Setup
button and dial 9.
pickup Answers a call ringing on another extension by entering the extension
number.
phold Puts a call on hold on an active shared line.
redial Displays a list of recently dialed numbers.
resume Resumes a call that is on hold.
save Saves your changes.
select Selects the highlighted item on the IP phone screen.
starcode Allows you to enter a star code. See “Using Star Codes,” on page 59.
unpark Resumes a parked call.
xfer Performs a call transfer.
xferLx Transfers an active line on the phone to a called number.
y/n Enters a submenu and when pressed, toggles between Yes or No to
enable or disable an option.
Button Function
Otros manuales para SPA50 Series
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Teléfono IP de Cisco
Cisco
Cisco 7940G Manual de instrucciones
Cisco
Cisco Unified 6921 Manual de usuario
Cisco
Cisco Unified 8961 Manual de usuario
Cisco
Cisco 8811 Manual de usuario
Cisco
Cisco 7921G - Unified Wireless IP Phone VoIP Manual de usuario
Cisco
Cisco SPA 303 Manual de usuario
Cisco
Cisco 794X Manual de usuario
Cisco
Cisco UNIFIED 9971 Manual de usuario
Cisco
Cisco 6945 Series Manual de usuario
Cisco
Cisco SPA525G - Small Business Pro IP Phone VoIP Manual de usuario
Cisco
Cisco Unified 6921 Manual de instrucciones
Cisco
Cisco 8800 Series Guía
Cisco
Cisco Cisco Unified IP Phone 7960G Manual de instrucciones
Cisco
Cisco 8861 Guía de referencia rápida
Cisco
Cisco 7941G-GE - IP Phone VoIP Manual de usuario
Cisco
Cisco 8841 Manual de usuario
Cisco
Cisco Small Business Pro SPA 504G Manual de usuario
Cisco
Cisco 8800 Series Manual de usuario
Cisco
Cisco SPA 504G Manual de usuario
Cisco
Cisco 7975G - Unified IP Phone VoIP Manual de instrucciones
