Cisco 8831 Manual de usuario

Perform a Hard Factory Reset on an 8831

Series IP Phone

Contents

Introduction

Reset the IP Phone

Factory Reset

Hard Factory Reset

Introduction

This document describes how to perform a hard factory reset on a Cisco 8831 Series IP phone,

which resets all of the network and security settings of the phone.

Reset the IP Phone

There are two methods that you can use in order to reset the Cisco IP phone: a factory reset, and

a hard factory reset.

Factory Reset

In order to perform a factory reset, navigate to Apps > Admin Settings > Reset Settings.

Choose one of these options in order to reset the phone to the factory default settings:

All

●

Network

●

Security

●

Hard Factory Reset

If the factory reset method that is described in the previous section is not possible, then a hard

reset can be attempted in order to achieve similar results. However, this method resets all of the

settings directly and does not provide the option to reset only the network or security settings.

Complete these steps in order to perform a hard factory reset of the phone:

Step 1. Unplug the Ethernet cable from the back side of the phone in order to power off the phone.

Note: If the phone is powered through a power brick, then power it off through the power

brick.

Step 2. Press and hold the Microphone (MIC) button on the front side of the phone, as shown in

the image.

Step 3. Continue to hold the MIC button and power on the phone (plug in the Ethernet cable or the

power brick). When the lights that are located on the left, right, and back sides of the phone

change from green to red, release the MIC button, as shown in the image.

Step 4. Press and hold the MIC button for approximately five seconds, and then release it. The

lights should blink red twice.

Step 5. Press and hold the MIC button. After approximately five seconds, the lights should begin to

blink red continuously, which confirms the factory reset of the phone.

Click this video in order to view the procedure:

Otros manuales para 8831

12

Tabla de contenidos

Otros manuales de Teléfono IP de Cisco

Cisco

Cisco DATAVOX 7941 Manual de usuario

Cisco

Cisco SPA300 Series Manual de usuario

Cisco

Cisco IP 7912 Manual de usuario

Cisco

Cisco 6900 Series Cómo utilizar

Cisco

Cisco 7931G - Unified IP Phone VoIP Manual de instrucciones

Cisco

Cisco 8811 Manual de usuario

Cisco

Cisco 6941 - Unified IP Phone Slimline VoIP Guía

Cisco

Cisco 7811 Guía de referencia

Cisco

Cisco 7942 Manual de usuario

Cisco

Cisco 504 Manual de servicio

Cisco

Cisco MCS 7800 Series Manual de usuario

Cisco

Cisco Cisco 7960 Manual de usuario

Cisco

Cisco SPA50X Manual de usuario

Cisco

Cisco 7940G Manual de usuario

Cisco

Cisco 7905 serie Manual de usuario

Cisco

Cisco 7961G - IP Phone VoIP Manual de instrucciones

Cisco

Cisco 8811 Manual de usuario

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Manual de usuario

Cisco

Cisco Cisco 7940 Manual de usuario

Cisco

Cisco 8941 Manual de usuario

Cisco

Cisco Small Business SPA525G2 Manual de usuario

Cisco

Cisco 8811 Manual de usuario

Cisco

Cisco 7811 Manual de usuario

Cisco

Cisco 7841/21 Manual de usuario

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario

Nortel

Nortel i2050 Manual de usuario

Fiberme

Fiberme FAP260 Series Manual de usuario