Cisco VT II Manual de usuario
Introducing Cisco VT Camera II 1
Getting Started 1
Cisco VT Camera II Package 2
Installation Requirements 2
Installing your Cisco VT Camera II 3
Installation Sequence 4
How to Set Up the Cisco VT Camera II 5
How To Install the Cisco VT Camera II 7
Using Your Cisco VT Camera II 8
Cisco VT Camera II Features 9
Using Cisco Video Telephony Applications 10
Using Cisco VT Camera II with Cisco Unified Video Advantage 10
Using Cisco VT Camera II with Cisco Unified Personal Communicator 11
Regulatory Compliance and Safety Information 11
Cisco One-Year Limited Hardware Warranty Terms 18
1
Quick Start Guide for Cisco VT Camera II
Introducing Cisco VT Camera II
Congratulations on your purchase of Cisco VT Camera II. Cisco VT Camera
II is a camera for use with Cisco Unified Video Advantage or Cisco Unified
Personal Communicator. These applications allow you to add video to your
communications.
This guide provides information and instructions for the Cisco VT Camera II.
It includes these topics:
•Getting Started
•Installing your Cisco VT Camera II
•Using Your Cisco VT Camera II
•Using Cisco Video Telephony Applications
•Regulatory Compliance and Safety Information
•Cisco One-Year Limited Hardware Warranty Terms
Getting Started
Check your Cisco VT Camera II package and verify installation requirements
before you begin the installation.
2
78-16026-04
Cisco VT Camera II Package
Review the following list to make sure you have received all the necessary
items to install your Cisco VT Camera II.
•1 Cisco VT Camera II with attached USB cable
•1 flexible camera base
•1 privacy shade
•this Quick Start Guide for Cisco VT Camera II
See Figure 1 in the “How to Set Up the Cisco VT Camera II” section on
page 5 for an illustration of the Cisco VT Camera II components and
connections. If you are missing any items, contact your system administrator
before continuing with the installation.
Installation Requirements
Installation requirements may vary depending upon whether you are using
your Cisco VT Camera II with Cisco Unified Video Advantage or
Cisco Unified Personal Communicator.
For the latest information about supported phone models and minimum PC
requirements, consult the user guide for your product or contact your system
administrator.
3
Quick Start Guide for Cisco VT Camera II
If you are a system administrator or technician, information about
Cisco Unified Video Advantage network, PC, and other requirements is
provided in the Cisco Unified Video Advantage Administration Guide,
available at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps5662/tsd_products_su
pport_series_home.html
If you are a system administrator or technician, information about Cisco
Unified Personal Communicator network, PC, and other requirements is
provided in the Release Notes for Cisco Unified Personal Communicator
available at this URL:
http://www.cisco.com/en/US/products/ps6844/tsd_products_support_series
_home.html
Caution Connect the Cisco VT Camera II only to a certified USB port.
Installing your Cisco VT Camera II
Make sure you have read the “Getting Started” section on page 1 before you
begin installing your Cisco VT Camera II.
4
78-16026-04
Installation Sequence
You must follow this sequence when installing Cisco VT Camera II:
1. First, remove the Cisco VT Camera II parts from the packaging and set
up the camera. See the “How to Set Up the Cisco VT Camera II” section
on page 5.
2. Second, install the software for the product with which you intend to use
your Cisco VT Camera II. See the “How To Install the
Cisco VT Camera II” section on page 7.
Caution Do not connect the Cisco VT Camera II to your PC unless
prompted to do so during the software installation. If you are
not prompted to connect during installation, wait until after
software installation is complete to connect the
Cisco VT Camera II to your PC.
5
Quick Start Guide for Cisco VT Camera II
How to Set Up the Cisco VT Camera II
Your system administrator or a technician will likely set up the
Cisco VT Camera II. If that is not the case, setting up your camera is easy.
See Figure 1, and the steps that follow.
Figure 1 Cisco VT Camera II Components and Connections
141719
4
2
1
3
5
6
6
78-16026-04
Procedure
1. Remove the camera, privacy shade, and the flexible camera base from
the packaging.
2. Mount the camera on the flexible camera base:
a. Insert the protruding black plastic tab on the camera base into the
opening on the bottom of the camera.
b. Snap the camera into place.
The camera will then be firmly connected to the flexible camera base.
3. Attach the privacy shade to the camera.
4. Position the camera on top of your PC monitor or flat panel screen,
adjusting the flexible camera base as necessary. See Figure 2.
1Cisco VT Camera II 4Flexible camera base
2USB cable and connector 5Opening on the bottom of the
camera
3Privacy shade (attaches to the
camera)
6Tab on the flexible camera base
(snaps into the opening on the
bottom of the camera)
7
Quick Start Guide for Cisco VT Camera II
Figure 2 Cisco VT Camera II Placed on PC Monitor
5. Now go to the “How To Install the Cisco VT Camera II” section on
page 7.
How To Install the Cisco VT Camera II
Installation of Cisco VT Camera II occurs during the installation process for
the software with which you intend to use the camera. Because installation
procedures will vary depending on whether you are using Cisco VT Camera
105777
8
78-16026-04
II with Cisco Unified Video Advantage or Cisco Unified Personal
Communicator, see the user guide for procedural information about the
installation process.
Your system administrator will likely provide you with instructions about
how to obtain the software and user guide for Cisco Unified
Video Advantage or Cisco Unified Personal Communicator. If you did not
receive those instructions, contact your system administrator.
Caution Do not connect the Cisco VT Camera II to your PC unless
prompted to do so during the installation. If you are not
prompted to connect during installation, wait until after
software installation is complete to connect the
Cisco VT Camera II to your PC.
For more information see the “Using Your Cisco VT Camera II” section on
page 8.
Using Your Cisco VT Camera II
The camera is designed for optimal eye contact when placed on top of your
PC monitor or flat panel screen. You might want to try out several different
positions.
Tabla de contenidos
Otros manuales de Cámara digital de Cisco
