B6000 User Manual Cimetrics, Inc
7
BACnet/IP Settings
On this screen, a user can configure the following parameters
1. IP Address –IP address of device.
2. Network Mask –Subnet mask for the subnet your device is on.
3. DefaultGateway –IP address of default gateway
4. BACnet UDP Port –BACnet UDP port (Default is 47808. In some cases e.g. a situation
where it is desirable for two groups of BACnet devices to coexist independently on the same IP
subnet, the UDP port may be configured locally to a different value.
5. BACnet Device Number –Or Device ID. It is a numeric code that is used to identify the
BACnet Device. Default ID is generated from the MAC address of B6030.
6. BBMD IP Address –If you want B6030 to be a foreign device then here you specify IP
address of target BBMD. It will enable Foreign Device mode.
To find out more about Foreign device and BBMD visit:
http://www.bacnet.org/Bibliography/ES-7-99/IPPART2.HTM
http://www.bacnet.org/Tutorial/BACnetIP/sld015.html
7. A Description for the Device –Location/application string (0-63 characters) to help user
find the Device Object Name.
By checking Enable BACnet/IP control objects box you can write to Modbus registers (for serial line
devices only).
