ChipSiP CWFC103 Manual de usuario
ChipSiP CWFC10x Serial
CWF10x Serial
AP/Client/Router
With
2LANs
ChipSiP CWFC10x Serial
Copyright Statement
Trademarks
Copyright @2010
Contents are subject to change without notice.
All trademarks belong to their respective proprietors.
Copyright Statement
THIS DOCUMENT CONTAINS OF PROPRIETARY TECHNICAL
INFORMATION THAT IS THE PROPERTY OF THIS COMPANY. AND
NO PART OF THIS DOCUMENTATION MAY BE REPRODUCED,
STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY
FORM OR BY ANY MEANS, ELECTRICAL OR MECHANICAL, BY
PHOTOCOPYING, RECORDING, OR OTHERWISE, WITHOUT THE
PRIOR WRITTEN CONSENT OF THIS COMPANY.
ChipSiP CWFC10x Serial
Contents
CHAPTER 1 INTRODUCTION.........................................5
1.1 INTRODUCTION..............................................................5
1.2 HARDWARE FEATURES ..................................................6
1.3 SOFTWARE FEATURES ....................................................7
1.4 PACKAGE CONTENTS......................................................8
CHAPTER 2 HARDWARE INSTALLATION..................9
2.1 HOW TO INSTALL THE ROUTER ......................................9
2.2 LED INDICATOR AND PORT DESCRIPTION ...................10
2.3 3 POSITION SLIDE SWITCH...........................................10
CHAPTER 3 WIRELESS SETUP....................................11
3.1 DEFAULT CONFIGURATION .......................................... 11
3.2 CONFIGURE CWFC103 ...............................................12
3.3 SECURITY SETTING......................................................16
3.3 ACCESS CONTROL .......................................................23
3.4 WDS SETTINGS ...........................................................24
3.5 SITE SURVEY ...............................................................25
3.6 WPS............................................................................26
3.7 WIRELESS SCHEDULE ..................................................26
CHAPTER 4 TCP/IP SETTINGS.....................................28
4.1 LAN INTERFACE .........................................................28
4.2 WAN INTERFACE ........................................................29
CHAPTER 5 FIREWALL .................................................45
5.1. PORT FILTERING .........................................................45
5.2. IP FILTERING ..............................................................46
5.3 MAC FILTERING..........................................................48
5.4 PORT FORWARDING......................................................49
5.5 URL FILTERING...........................................................51
5.6 DMZ ...........................................................................52
ChipSiP CWFC10x Serial
5.7 VLAN SETTINGS.........................................................53
CHAPTER 6 ROUTING SETUP......................................55
6.1 QOS.............................................................................55
6.2 ROUTING .....................................................................57
CHAPTER 8 SYSTEM MAINTENANCES.....................59
8.1 STATUS ........................................................................59
8.2 STATIST IC S ...................................................................60
8.3 DDNS .........................................................................61
8.4 TIME ZONE SETTING....................................................62
8.5 DOS.............................................................................63
8.6 SYSTEM LOG ...............................................................64
8.6 UPGRADE FIRMWARE...................................................65
8.7 SAV E /RELOAD SETTINGS .............................................66
8.8 PASSWORD...................................................................67
ChipSiP CWFC10x Serial
Chapter 1 Introduction
1.1 Introduction
Thank you for purchasing CWFC103 Mobile
Multi-purpose Wireless device.
CWFC103 is a portable wireless AP/Router with up to
300Mbps transmission rate. It supports five working modes:
wireless AP (access point), Client+AP, WDS+AP, WISP
Router and Wireless Router.
The default mode is wireless Router. Wireless mode
can be easily switched by sliding the side switch. There are 3
modes: Router, AP, and Client mode.
CWFC103 can be powered from either AC/DC 5V 0.5A
adapter or a computer/Notebook with USB port.
ChipSiP CWFC10x Serial
1.2 Hardware Features
Standard IEEE 802.11b/g/n standards compliant
Wireless LAN 2T2R Mode
Antenna External 0dB antenna
Interface 2 RJ45 (1LAN, 1WAN)
1 USB
Reset/WPS button
Slide switch to select Router, AP, or
client mode
Frequency
Range
2.400 ~ 2.4835 GHz (subject to local
regulations)
Number of
Selectable
Channels
802.11n 20MHz/40MHz
802.11b/g
USA, Canada (FCC); 11 channels
(2.412GHz ~2.462GHz)
Europe (CE): 13 channesl
(2.41GHz!2.472GHz)
Japan (TELEC): 14 channels
(2.41GHz~2.4835GHz)
Data Rate 802.11n: up to 300Mbps
802.11g: 6,9,12,18,24,36,48,54Mbps
802.11b: 1,2,5.5, 11Mbps
Coverage Area Up to 6 times faster than existing
802.11b/g product
Transmit Power 11n HT40 MCS7 : +13.5dBm
11b CCK: +17.5dBm
11g OFDM: +13.5dBm
Receiver
Sensitivity
-66dBm at HT40 MCS7
-73dBm at 54Mpbs
-86dBm at 11Mpbs
LED Power, WPS, Wireless LAN, WAN
ChipSiP CWFC10x Serial
1.3 Software Features
WAN DHCP Client
Static IP
PPPoE (for ADSL)
L2TP
PPTP
Networking DHCP Client/Relay/Server
Dynamic DNS
NTP Client
DNS Cache/Proxy
Firewall:
MAC/IP/Port Filter
Virtual Server
DMZ
Content Filter
WIFI 1 Transmit and 1 Receive paths (1T1R)
20MHz/40MHz bandwidth
Support Multiple SSID
Support Hidden SSID
Support WPS
Clock rate up to 400MHz Legacy and High
Throughput Modes
High security: WEP64/128,TKIP,
WPA,WPA2 AES,mixed, 802.11i
802.1X Authentication with RADIUS
Client
QoS-WMM, WMM-PS
ChipSiP CWFC10x Serial
1.4 Package contents
The package contains the following items
1 CWFC103
1 AC/DC Adapter
Input: 110~240V 50/60Hz,
Output: 5V 500mA adapter
1 One quick installation guide
1 CD
1 Ethernet cable
1 USB cable
ChipSiP CWFC10x Serial
Chapter 2 Hardware Installation
2.1 How to Install the Router
After you unpack the box, please make sure all the
components are completed.
Follow the below setup to setup the CWFC103:
1. Connect the Ethernet cable to the CWFC103 WAN
port
2. Connect the other end of the Ethernet cable to the
device (for example ADSL)
3. Connect the miniUSB power cord to the CWFC103
miniUSB power
4. Connect the AC/DC adapter to the wall or power
extension cord
Power Supply: Please use the power adapter from the package
to power on the CWFC103. (IMPORTANT: Use of a different
power adapter could damage the CWFC103.)
ChipSiP CWFC10x Serial
2.2 LED Indicator and Port Description
LED indicators description on front panel: (From R to L)
1. PWR:Indicates CWFC103 is power on.
2. WPS:Flashing indicates CWFC103 is negotiating
with the client in WPS mode.
3. WL: Indicates the WIRELESS LAN is
connected.
4. WAN: Indicates an Ethernet cable is connected
into WAN port.
5. LAN:Indicate an Ethernet cable is connected into
the LAN port.
2.3 3 Position Slide Switch
Left: AP/Bridge Mode
Middle: Client/Bridge Mode
Right: Router Mode
Tabla de contenidos
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad