CHIEF FSB-4394 Manual de usuario

Tabla de contenidos

Otros manuales de Rack y soporte de CHIEF

CHIEF

CHIEF MSP-WRTS1 Manual de usuario

CHIEF

CHIEF PAC-101 Manual de usuario

CHIEF

CHIEF FMSWA Manual de usuario

CHIEF

CHIEF PSM2613 Manual de usuario

CHIEF

CHIEF OB1U Manual de usuario

CHIEF

CHIEF PAC-Y3 Manual de usuario

CHIEF

CHIEF CMA101 Manual de usuario

CHIEF

CHIEF KTC Series Manual de usuario

CHIEF

CHIEF RPM Manual de usuario

CHIEF

CHIEF LTMPU Manual de usuario

CHIEF

CHIEF KRA300 Manual de usuario

CHIEF

CHIEF PAC516 Manual de usuario

CHIEF

CHIEF WM-100 Manual de usuario

CHIEF

CHIEF SSB-313 Manual de usuario

CHIEF

CHIEF CMA450 Manual de usuario

CHIEF

CHIEF FTR Series Manual de usuario

CHIEF

CHIEF FCA3U Manual de usuario

CHIEF

CHIEF SL-150 Manual de usuario

CHIEF

CHIEF CMA-395 Manual de usuario

CHIEF

CHIEF MWC Series Manual de usuario

CHIEF

CHIEF XTM Series Manual de usuario

CHIEF

CHIEF FSB4090 Manual de usuario

CHIEF

CHIEF Kontour K4G220 Manual de usuario

CHIEF

CHIEF J Series Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario

INSTALLATION INSTRUCTIONS

CHIEF MANUFACTURING INC. 8804-000328

1-800-582-6480 952-894-6280 FAX 952-894-6918 2005 Chief Manufacturing

8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 09/06

SMALL FLAT PANEL DISPLAY MOUNTING BRACKET

FSB-4394

(1) FSB Interface Bracket (4) Mounting Buttons

(4) 10-24 x .5 Button Head Cap Screw (4) .875 x .33 x .375 Nylon Washer

(4) M4 x 20mm Phillips Head Cap Screw (4) M4 x 25mm Phillips Head Cap Screw

(4) M4 x 40mm Phillips Head Cap Screw (1) 1/8 Allen Key

(4) M4 x 16mm Phillips Head Cap Screw (4) M4 Shoulder washers

(4) M4 Flat washers

BEFORE PROCEEDING: Unpack the carton, verify contents shown in Figure 1 and read

installation instructions completely. If you are missing any of the listed components, please

contact Customer Service at 1-800/582-6480.

Displays are Extremely Fragile.

NOTE: If installing screen onto a VESA 100mm X 100mm mount, skip to step 2 on Page 2 (mounting button

installation is not required).

1. Using #10-24 screws secure mounting button to bracket, with chamfered hole of mounting

button (larger surface) facing bracket (4 places) (see Figure 2 and Figure 3).

CAUTION!

Figure 1

Figure 2 Figure 3

2. Place nylon spacers on mounting holes, aligning hole pattern on brackets with pattern on

back of display (see Figure 3 and Figure 4).

3. Using the proper length of M4 screws (depending on screen), secure bracket to display. Do not over

tighten screws.

4. For Chief Q2™ mounts with 5” X 5” Mounting System - With the aid of another person,

lift the display up to the mount, align the mounting buttons on the plasma with the slots in the

mount, and set the screen into place. Lower safety latch on the Chief Mount to secure your

display, making sure latch is completely engaged.

5. For VESA 100mm X 100mm Mounting Systems - With the aid of another person, lift

display up to the mount, align threaded holes of interface bracket to mounting holes of

mount. Attach screen to mount (per mount instructions) with M4 screws provided with

mount.

6. For Chief Q2™ mounts with 100mm X 100mm Mounting System – Using the buttons

from the mount, secure the buttons with the 16mm M4 screws that come with bracket.

Follow the diagrams below for button mounting. With the aid of another person, lift the

display up to the mount, align the mounting buttons on the plasma with the slots in the

mount, and set the screen into place. Lower safety latch on the Chief Mount to secure your

display, making sure latch is completely engaged.

ALL COMPONENTS MUST BE SECURELY FASTENED TO A

STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES

THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE

EQUIPMENT BEING MOUNTED. IF IT CANNOT SUPPORT

THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.

THE MAXIMUM WEIGHT TO BE INSTALLED ON THE

BRACKET IS 45 POUNDS (20.41 KG).

WARNING

Figure 3 Figure 4

Figure 5 Figure 6