Chicago Pneumatic CP721 Manual de usuario

Manual

CP721 Series

3/8” Impact Wrench

To reduce risk of injury, everyone using, installing, repairing,

maintaining, changing accessories on, or working near this tool

must read and understand these instructions before performing

any such task.

WARNING

CP721 Series

Impact Wrench

Noise & Vibration Declaration

Sound pressure level 87 dB(A), uncertainty 3 dB(A), in

accordance with EN ISO 15744. For sound power, add 11

dB(A).

Vibration value:

4.7 m/s², uncertainty k = 3.3 m/s², re. ISO 28927-2.

Declaration of noise and vibration emission

All values are current as of the date of this publication.

These declared values were obtained by laboratory type

testing in accordance with the stated standards and are

suitable for comparison with the declared values of other tools

tested in accordance with the same standards. These

declared values are not adequate for use in risk assessments

and values measured in individual work places may be higher.

The actual exposure values and risk of harm experienced by

an individual user are unique and depend upon the way the

user works, the workpiece and the workstation design, as well

upon the exposure time and the physical condition of the

user. We, Chicago Pneumatic, cannot be held liable for the

consequences of using the declared values, instead of values

reflecting the actual exposure, in an individual risk

assessment in a work place situation over which we have no

control.

This tool may cause hand-arm vibration syndrome if its use is

not adequately managed.

We recommend a programme of health surveillance to detect

early symptoms which may relate to noise or vibration

exposure, so that management procedures can be modified

to help prevent future impairment.

INSTRUCTION MANUAL

Machine Type:

This product is designed for installing and removing threaded

fasteners in wood, metal and plastic. No other use permitted.

For professional use only.

Air Supply Requirements

1. Supply tool with 90 psig (6.2 bar) of clean, dry air. Higher

pressure drastically reduces tool life.

2. Connect tool to air line using pipe, hose and tting sizes

shown in the diagram below.

Lubrication

1. Use an air line lubricator with SAE #10 oil, adjusted to

two (2) drops per minute. If an air line lubricator cannot be

used, add air motor oil to the inlet once a day.

2. Check clutch oil once each month. Use 1/3 oz. (10 ml) of

SAE #30 oil or equivalent.

Operation

1. The intended use of this impact wrench is with impact rated

sockets operating upon threaded fasteners. To operate,

pull trigger on handle. To operate in forward rotation, push

the reverse pin. To operate in reverse, pull the reverse pin.

2. This impact wrench is equipped with a regulator to enable

adjustment of output power. Turn the regulator knob

counter-clockwise for maximum power, clockwise to reduce

power.

Maintenance

1. After rst year, disassemble and inspect air motor and

impacting clutch every three (3) months if the tool is used

every day. Replace damaged or worn parts.

2. High wear parts are underlined in the parts list.

3. To keep downtime to a minimum, the following service kits

are recommended:

Tune-Up Kit: see part list 8940169227

Technical Data

Free speed; 11000RPM

Learn more about air impact wrenches we have.

Otros manuales para CP721

Este manual sirve para los siguientes modelos

Otros manuales de Atornillador de impacto de Chicago Pneumatic

Chicago Pneumatic

Chicago Pneumatic CP721 Manual de usuario

Chicago Pneumatic

Chicago Pneumatic RP9545 Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP734H Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP6910-P24 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP797 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP8252 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP0611-D28H Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP2136 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP6728-P05R Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP772H Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP7620-2 Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP749K Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP734H Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP724H series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP8252 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP6768EX-P18D Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP797 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP7776 Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP7778-6 Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP772H-6 Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP7749 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP797 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP611 Series Manual de usuario

Chicago Pneumatic

Chicago Pneumatic CP7778B Series Manual de usuario

Manuales populares de Atornillador de impacto de otras marcas

stayer

stayer IW500D Manual de usuario

Makita

Makita DTD152 Manual de usuario

Milwaukee

Milwaukee M12 FID Manual de usuario

Grizzly

Grizzly H6140 Manual de usuario

Makita

Makita BTW450 Manual de usuario

Ozito

Ozito LID-3000 Manual de usuario

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Manual de usuario

Greenlee

Greenlee HW3 Manual de usuario

Sthor

Sthor 57091 Manual de usuario

Makita

Makita DTD145 Manual de usuario

Hilti

Hilti SIW 2-A12 Manual de usuario

Ryobi

Ryobi R18IW3 Manual de usuario

Parkside

Parkside PDSSA 20-Li A1 Manual de usuario

Flex

Flex FX1471 Manual de usuario

SATA

SATA 51075C Manual técnico

Cembre

Cembre NR-11P Manual de usuario

Makita

Makita BTP131RFE Manual de usuario

DeWalt

DeWalt XR Li-ion DCF902 Manual de usuario