Chicago Electric 69360 Manual de instalación

12V LITHIUM CORDLESS DRILL

Model

69360

SET UP AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Manual Revised 12a

Page 2For technical questions, please call 1-800-444-3353.SKU 69360

SAVE THIS MANUAL

Keep this manual for the safety warnings

and precautions, assembly, operating,

inspection, maintenance and cleaning

procedures. Write the product’s serial number

in the back of the manual near the assembly

diagram (or month and year of purchase if

product has no number). Keep this manual

and the receipt in a safe and dry place for

future reference.

IMPORTANT SAFETY

INFORMATION

In this manual, on the labeling, and

all other information provided with

this product:

This is the safety alert

symbol. It is used to alert

you to potential personal

injury hazards. Obey all

safety messages that follow

this symbol to avoid possible

injury or death.

DANGER indicates a

hazardous situation

which, if not avoided, will result

in death or serious injury.

WARNING indicates a

hazardous situation

which, if not avoided, could

result in death or serious injury.

CAUTION, used with

the safety alert

symbol, indicates a hazardous

situation which, if not avoided,

could result in minor or moderate

injury.

NOTICE is used to

address practices not

related to personal injury.

CAUTION, without the

safety alert symbol, is

used to address practices not

related to personal injury.

General Power Tool Safety Warnings

WARNING Read all safety warnings

and instructions. Failure to follow the

warnings and instructions may result

in electric shock, re and/or serious

injury.

Save all warnings and instructions

for future reference.

The term ″power tool″ in the warnings

refers to your mains-operated (corded)

power tool or battery-operated

(cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b. Do not operate power tools in

explosive atmospheres, such as in

the presence of ammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust or

fumes.

c. Keep children and bystanders

away while operating a power tool.

Distractions can cause you to lose

control.

2. Electrical safety

Do not expose power tools to rain

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

3. Personal safety

a. Stay alert, watch what you are

doing and use common sense when

Page 3For technical questions, please call 1-800-444-3353.SKU 69360

operating a power tool. Do not use

a power tool while you are tired or

under the inuence of drugs, alcohol

or medication. A moment of inattention

while operating power tools may result

in serious personal injury.

b. Use personal protective equipment.

Always wear eye protection. Safety

equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing

protection used for appropriate

conditions will reduce personal injuries.

c. Prevent unintentional starting.

Ensure the trigger is in the off-

position before connecting to power

source and/or battery pack, picking

up or carrying the tool. Carrying

power tools with your nger on the

switch or energizing power tools that

have the switch on invites accidents.

d. Remove any adjusting key or wrench

before turning the power tool on.

A wrench or a key left attached to a

rotating part of the power tool may result

in personal injury.

e. Do not overreach. Keep proper

footing and balance at all times. This

enables better control of the power tool

in unexpected situations.

f. Dress properly. Do not wear loose

clothing or jewelry. Keep your hair,

clothing and gloves away from

moving parts. Loose clothes, jewelry

or long hair can be caught in moving

parts.

g. If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used. Use of

these devices can reduce dust-related

hazards.

h. Only use safety equipment that has

been approved by an appropriate

standards agency. Unapproved

safety equipment may not provide

adequate protection. Eye protection

must be ANSI-approved and breathing

protection must be NIOSH-approved for

the specic hazards in the work area.

4. Power tool use and care

a. Do not force the power tool. Use

the correct power tool for your

application. The correct power tool will

do the job better and safer at the rate

for which it was designed.

b. Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must

be repaired.

c. Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such

preventive safety measures reduce

the risk of starting the power tool

accidentally.

d. Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

the power tool. Power tools are

dangerous in the hands of untrained

users.

e. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool’s operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

f. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

Page 4For technical questions, please call 1-800-444-3353.SKU 69360

g. Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions and

the work to be performed. Use of

the power tool for operations different

from those intended could result in a

hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger

specied by the manufacturer. A

charger that is suitable for one type of

battery pack may create a risk of re

when used with another battery pack.

b. Use power tools only with

specically designated battery

packs. Use of any other battery packs

may create a risk of injury and re.

c. When battery pack is not in use, keep

it away from other metal objects,

like paper clips, coins, keys, nails,

screws or other small metal objects,

that can make a connection from

one terminal to another. Shorting the

battery terminals together may cause

burns or a re.

d. Under abusive conditions, liquid

may be ejected from the battery;

avoid contact. If contact accidentally

occurs, ush with water. If liquid

contacts eyes, additionally seek

medical help. Liquid ejected from the

battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a

qualied repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

Drill and Impact Drill Safety

Warnings

1. Hold power tools by insulated

gripping surfaces when performing

an operation where the cutting tool

may contact hidden wiring or its own

cord. Contact with a ″live″ wire will make

exposed metal parts of the tool ″live″ and

shock the operator.

2. Let bit cool before touching, changing

or adjusting it. Bits heat up dramatically

while in use, and can burn you.

3. If the drill bit jams, release the trigger

immediately; drill torque can cause injury

or break bit.

4. Maintain labels and nameplates on

the tool. These carry important safety

information. If unreadable or missing,

contact Harbor Freight Tools for a

replacement.

5. Avoid unintentional starting. Prepare to

begin work before turning on the tool.

6. Do not lay the tool down until it has come

to a complete stop. Moving parts can

grab the surface and pull the tool out of

your control.

7. When using a handheld power tool,

maintain a rm grip on the tool with both

hands to resist starting torque.

8. Do not leave the tool unattended when

it is plugged into an electrical outlet.

Turn off the tool, and unplug it from its

electrical outlet before leaving.

9. The battery charger gets hot

during use. The charger’s

heat can build up to unsafe

levels and create a re hazard

if it does not receive adequate

ventilation, due to an electrical fault, or if

it is used in a hot environment.

Page 5For technical questions, please call 1-800-444-3353.SKU 69360

Do not place the charger on a ammable

surface. Do not obstruct any vents on

the charger. Especially avoid placing

the charger on carpets and rugs; they

are not only ammable, but they also

obstruct vents under the charger.

Place the charger on a stable, solid,

nonammable surface (such as a stable

metal workbench or concrete oor) at

least 1 foot away from all ammable

objects, such as drapes or walls. Keep a

re extinguisher and a smoke detector in

the area. Frequently monitor the charger

and battery while charging.

10. This product is not a toy. Keep it out of

reach of children.

11. People with pacemakers should

consult their physician(s) before use.

Electromagnetic elds in close proximity

to heart pacemaker could cause

pacemaker interference or pacemaker

failure. In addition, people with

pacemakers should:

• Avoid operating alone.

• Do not use with trigger locked on.

• Properly maintain and inspect to avoid

electrical shock.

• Any power cord must be properly

grounded. Ground Fault Circuit

Interrupter (GFCI) should also be

implemented – it prevents sustained

electrical shock.

12. WARNING: Some dust created by power

sanding, sawing, grinding, drilling, and

other construction activities, contains

chemicals known [to the State of

California] to cause cancer, birth defects

or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and

cement or other masonry products

• Arsenic and chromium from chemically

treated lumber

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to

these chemicals: work in a well ventilated

area, and work with approved safety

equipment, such as those dust masks

that are specially designed to lter out

microscopic particles. (California Health

& Safety Code § 25249.5, et seq.)

13. WARNING: Handling the cord on this

product will expose you to lead, a

chemical known to the State of California

to cause cancer, and birth defects or

other reproductive harm. Wash hands

after handling. (California Health &

Safety Code § 25249.5, et seq.)

14. The warnings, precautions, and

instructions discussed in this instruction

manual cannot cover all possible

conditions and situations that may occur.

It must be understood by the operator

that common sense and caution are

factors which cannot be built into this

product, but must be supplied by the

operator.

Page 6For technical questions, please call 1-800-444-3353.SKU 69360

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE A

LARGE AMOUNT OF ENERGY AND

WILL VENT FIRE OR EXPLODE IF

MISTREATED:

1. Keep Battery Pack dry.

2. DO NOT DO ANY OF THE

FOLLOWING TO THE BATTERY PACK:

a. Open,

b. Drop,

c. Short-circuit,

d. Incinerate, or

e. Expose to temperatures greater than

140°F.

3. Charge Battery Pack only according to

the instructions indicated in the charger

manual.

4. Inspect Battery Pack before every use;

do not use or charge if damaged.

Vibration Safety

This tool vibrates during use. Repeated

or long-term exposure to vibration may

cause temporary or permanent physical

injury, particularly to the hands, arms

and shoulders. To reduce the risk of

vibration-related injury:

1. Anyone using vibrating tools regularly

or for an extended period should rst

be examined by a doctor and then have

regular medical check-ups to ensure

medical problems are not being caused

or worsened from use. Pregnant

women or people who have impaired

blood circulation to the hand, past hand

injuries, nervous system disorders,

diabetes, or Raynaud’s Disease

should not use this tool. If you feel any

symptoms related to vibration (such as

tingling, numbness, and white or blue

ngers), seek medical advice as soon as

possible.

2. Do not smoke during use. Nicotine

reduces the blood supply to the hands

and ngers, increasing the risk of

vibration-related injury.

3. Wear suitable gloves to reduce the

vibration effects on the user.

4. Use tools with the lowest vibration when

there is a choice.

5. Include vibration-free periods each day

of work.

6. Grip tool as lightly as possible (while still

keeping safe control of it). Let the tool

do the work.

7. To reduce vibration, maintain the tool

as explained in this manual. If any

abnormal vibration occurs, stop use

immediately.

SAVE THESE

INSTRUCTIONS.

Page 7For technical questions, please call 1-800-444-3353.SKU 69360

GROUNDING

TO PREVENT

ELECTRIC SHOCK

AND DEATH FROM INCORRECT

GROUNDING WIRE

CONNECTION:

Check with a qualied electrician

if you are in doubt as to whether

the outlet is properly grounded.

Do not modify the power cord

plug provided with the tool.

Never remove the grounding

prong from the plug. Do not use

the tool if the power cord or plug

is damaged. If damaged, have it

repaired by a service facility

before use. If the plug will not t

the outlet, have a proper outlet

installed by a qualied

electrician.

Double Insulated Tools: Tools with

Two Prong Plugs

Outlets for 2-Prong Plug

1. Tools marked “Double Insulated” do not

require grounding. They have a special

double insulation system which satises

OSHA requirements and complies with

the applicable standards of Underwriters

Laboratories, Inc., the Canadian

Standard Association, and the National

Electrical Code.

2. Double insulated tools may be used in

either of the 120 volt outlets shown in the

preceding illustration. (See Outlets for

2-Prong Plug.)

Extension Cords

Note: Extension cords must not be used with

this item’s charger.

Symbology

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

V~ Volts Alternating Current

AAmperes

n0xxxx/min. No Load Revolutions per Minute

(RPM)

Page 8For technical questions, please call 1-800-444-3353.SKU 69360

SPECIFICATIONS

Charger Input 120V~ / 60Hz

Motor Speed 0-350 RPM (1st gear)

0-1200 RPM (2nd gear)

Battery 12V, 1300mAh Lithium-Ion

(ITEM 68059)

Chuck Capacity 3/8" (10mm)

UNPACKING

When unpacking, make sure that the

item is intact and undamaged. If any parts

are missing or broken, please call Harbor

Freight Tools at 1-800-444-3353 as soon as

possible.

INSTRUCTIONS FOR PUTTING

INTO USE

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set up

or use of this product.

Functions

Chuck

Collar

Clutch

Collar

Trigger

Battery

Pack

Light

Direction

Switch

Gear Switch

Controls

1. TRIGGER:

This is a variable speed tool.

Squeeze the Trigger more to increase

speed, less to reduce speed.

The light will illuminate when the trigger

is pressed.

2. DIRECTION SETTING:

: (towards front of drill)

Press switch from the right side

of the drill to make the drill turn

clockwise, usually for tightening or

driving screws.

: (away from front of drill)

Press switch from the left side

of the drill to make the drill turn

counterclockwise, usually for

loosening or removing screws.

3. CLUTCH COLLAR:

1 - 11: These settings control the amount

of torque at the bit to prevent

stripping bolts and screws or

splitting wood.

Settings range from 1 - lowest

torque - to 11 - highest torque.

: This setting prevents the clutch

from slipping. It is used when

drilling holes.

4. GEAR SWITCH:

1: low gear, higher torque

2: high gear, faster speed

CAUTION To prevent drill damage,

do not adjust any setting halfway

between options.

Example:

Do not use the Drill with the Clutch

collar set between settings 11 and .

Page 9For technical questions, please call 1-800-444-3353.SKU 69360

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set up

or use of this product.

Charging the Battery Pack

The Battery Pack (ITEM 68059) needs to

be charged before rst use. Recharge

the Battery after every use.

1. Remove the Battery Pack by pressing on

the striped side tabs and sliding it out.

Then set the Pack and Charger on a dry

reproof surface in a room where the

temperature ranges from 50-104° F.

NOTE: Allow a recently used Battery Pack

to cool completely before charging.

Also make sure the Battery Pack is

undamaged; do not charge a cracked or

leaking pack.

2. Insert Charger’s plug into a grounded,

120V~ outlet. Then slide Battery Pack

into Charger’s battery port, making sure

Battery Pack’s tabs snap into place and

Battery Pack is secure before charging.

Green

Light

Red Light

Charger

Battery Pack

The green light will activate once

Charger is plugged in. The green light

will continue to light and the red light will

ash during charging.

NOTE: Normal charging time after use is

about 45 minutes.

4. When Battery Pack is fully charged, both

red and green lights will stay lit.

NOTE: If both the green and red lights of the

charger are blinking simultaneously, the

charger or the battery is defective.

NOTE: Batteries will not reach full charge the

rst time they are charged. Allow for

several cycles (drilling and recharging)

before the Tool is fully charged.

5. Press Battery Pack’s side tabs and pull

Pack from the Charger and unplug the

Charger from the wall outlet.

Note: Do not use a battery pack immediately

after charging. Allow it to cool rst. Store

the Charger and Battery Packs not in

use indoors, away from children.

Page 10For technical questions, please call 1-800-444-3353.SKU 69360

Tool Set Up

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Release the Trigger and remove

the Battery Pack before adjusting

tool or installing accessories.

BIT INSTALLATION:

1. CAUTION! Let bit cool before

touching, changing or adjusting it.

Bits heat up dramatically while in use,

and can burn you.

2. Slide Direction Selector to its mid-

position.

3. While holding ring behind collar of

Chuck with one hand, rotate collar

counterclockwise to open jaws.

4. Insert shank of drill bit or other accessory

into chuck.

5. Turn collar clockwise to hand tighten.

CAUTION! To prevent injury, do not

squeeze Trigger to release or tighten

chuck.

Work Piece and Work Area Set Up

1. Designate a work area that is clean and

well-lit. The work area must not allow

access by children or pets to prevent

distraction and injury.

2. Secure loose work pieces using a vise

or clamps (not included) to prevent

movement while working.

3. There must not be objects, such as utility

lines, nearby that will present a hazard

while working.

General Operating Instructions

1. Change Direction, Clutch, and Gear

settings as desired, see page 8.

CAUTION: To prevent damage, do

not adjust any setting while drill is in

motion.

2. Install bit as explained to the left.

3. Insert Battery Pack into base of tool until

it clicks in place.

4. Place tip of bit against desired location.

Verify that work surface has no

hidden utility lines before drilling or

driving screws.

5. Place one hand over top of housing for

greater tool stability. With other hand

grip handle and squeeze Trigger to

activate motor.

6. Do not force bit. Excessive force will

damage tip and lead to tool failure.

Drill only as deep as needed.

7. To prevent accidents: After use, turn off

the tool and remove the Battery Pack

by pressing on the striped side tabs and

sliding it out. Clean, then store the tool

indoors out of children’s reach.

Tabla de contenidos

Otros manuales de Perforar de Chicago Electric

Chicago Electric

Chicago Electric 67616 Manual de instrucciones original

Chicago Electric

Chicago Electric 93449 Manual de usuario

Chicago Electric

Chicago Electric 93632 Manual de instalación

Chicago Electric

Chicago Electric 47991 Manual de instalación

Chicago Electric

Chicago Electric 60495 Instrucciones de montaje

Chicago Electric

Chicago Electric 3670 Manual de usuario

Chicago Electric

Chicago Electric 97907 Manual de instalación

Chicago Electric

Chicago Electric 98179 Manual de instalación

Chicago Electric

Chicago Electric 94434 Manual de usuario

Chicago Electric

Chicago Electric 46804 Manual de usuario

Chicago Electric

Chicago Electric 68856 Manual de usuario

Chicago Electric

Chicago Electric 95848 Manual de usuario

Chicago Electric

Chicago Electric 96299 Manual de usuario

Chicago Electric

Chicago Electric 93142 Manual de usuario

Chicago Electric

Chicago Electric 67089 Manual de instalación

Chicago Electric

Chicago Electric 66127 Manual de instalación

Chicago Electric

Chicago Electric 98179 Instrucciones de montaje

Chicago Electric

Chicago Electric 68169 Manual de instalación

Chicago Electric

Chicago Electric Chicago 44849 Manual del propietario

Chicago Electric

Chicago Electric 45338 Manual de usuario

Chicago Electric

Chicago Electric HARBOR FREIGHT TOOLS 98544 Manual de instalación

Chicago Electric

Chicago Electric 93632 Manual de usuario

Chicago Electric

Chicago Electric 68851 Instrucciones de montaje

Chicago Electric

Chicago Electric VARIABLE SPEED 18 VOLT CORD- LESS DRILL/HAMMER DRILL... Manual de usuario

Manuales populares de Perforar de otras marcas

Makita

Makita BDF456 Manual de usuario

Black & Decker

Black & Decker LDX220 Manual de usuario

Hitachi

Hitachi DH 40MA Manual de usuario

Challenge

Challenge JO Manual de referencia técnica

Makita

Makita LXFD01 Manual de usuario

Festool

Festool T18+3 Manual de usuario

Milwaukee

Milwaukee M12 FPDX-202X Manual de usuario

EINHELL

EINHELL TE-RH 32 E Manual de usuario

Makita

Makita DHP484 Manual de usuario

Makita

Makita FD05 Manual de usuario

Bosch

Bosch PSB 530 RA Manual de usuario

Maximum

Maximum 054-1359-4 Manual de usuario

Makita

Makita HP332D Manual de usuario

Raider

Raider RDP-HD31H Manual de usuario

Bort

Bort BPM-1400x2 Manual de usuario

Black & Decker

Black & Decker 7266 Manual de usuario

KENT USA

KENT USA TRD1230 Manual de usuario

Bosch

Bosch GSB 19-2 RE Manual de usuario