Operational Safety
Please read the following safety precautions to ensure personal safety and operational
longevity of the Chemyx syringe pump. Chemyx, Inc. is not responsible for the equipment if
used in a manner not specified by the manufacturer; warranty coverage provided by the
equipment may be dropped as a result.
CHEMYX PRODUCTS ARE NOT FOR USE ON HUMANS
USE PROPER POWER SUPPLY
Chemyx Inc is not responsible for the use of power supplies outside the stated
electrical specifications or failure to switch the power converter from 240V to 120V
while in the 240V environment or vice versa.
GROUND PRODUCT
Proper grounding is required.
DO NOT OPEN THE PUMP
Warranty coverage will be dropped if the pump is opened without authorization from
Chemyx. Do not touch any electric connectors on the product.
DO NOT OPERATE WITH SUSPECTED FAILURES
Even though the pump can operate at extremely fast speeds, the user must
determine the proper flow rate for any given application. For instance, pumping at
90ml/min using a 20 gauge needle will cause stalls and/or potential bursting of the
syringe. Chemyx is not responsible for any damage that might result from examples
similar to above.
PINCH HAZARD
Do not place fingers between the pusher block and end block while the pump is
running.
OBSERVE ALL WARNING LABELS ON PRODUCT
Read all labels on product to ensure proper usage.
CHEMYX IS NOT RESPONSIBLE FOR SYRINGE DAMAGE
It is the user’s responsibility to wet ground glass syringes and set / tighten the
safety nut appropriately for microsyringes.
7
