Checkpoint 12200 Manual de instrucciones

Classification [Protected] P/N:704817 | 1

For a list of our trademarks, please refer to: http://www.checkpoint.com/copyright.html.

For a list of our Third Party Copyright notices, please refer to: http://www.checkpoint.com/3rd_party_copyright.html.

Check Point 12200 Installing and

Removing Memory

704817

Protected

2012

Important - We recommend that only experienced personnel install or remove hardware

components. Installing or removing components incorrectly can permanently damage the

appliance.

Preparing the Appliance

Before you start to install or remove memory DIMMs, make sure that:

The appliance is in a clean environment and on a level surface.

You can physically access and open the cover of the appliance.

You can connect to the WebUI or CLI to shut down the appliance.

You have the Check Point memory DIMM upgrade kit.

Important - To protect the appliance and the memory modules from electrostatic

discharge damage, make sure that you are properly grounded before you touch

these components. Read the Health and Safety Information in the Check Point

12000 Appliances Getting Started Guide before you start to prepare the appliance.

We recommend that you use the grounding wrist strap that is included in the

upgrade kit. The grounding plug on the rear of the appliance provides a chassis

grounding point.

Upgrade Kit Contents

Installation guide - Check Point 12200 Installing and Removing Memory

Memory DIMMs

Screwdriver

Upgrade kit sticker

ESD grounding strap (anti-static)

To prepare the appliance:

1. From the WebUI or the CLI, shut down the appliance.

2. Use the power switch to turn off power to the appliance.

3. Remove the power cords from the appliance.

4. Remove the warranty sticker from the appliance cover screw.

5. Remove the appliance cover screws.

Only use the screwdriver that is included in the upgrade kit to open and replace the

appliance cover.

6. Remove the top cover from the appliance.

Check Point 12200

Item

Description

Appliance cover

Four appliance cover screws

Installing Memory DIMMs

Install additional 4GB DIMM(s) in the expansion memory sockets in the Check Point 12200.

Default Configuration

8 GB Upgraded Configuration

Default Configuration

12 GB Upgraded Configuration

Item

Description

Power supply units

Memory socket(s) with DIMM installed

Expansion memory socket(s)

LOM card socket

To install memory DIMMs in the appliance:

1. Find the DIMM memory slots on the system board.

The basic memory configuration of the appliance ships with one DIMM installed.

2. Press on the two white retaining clips outward.

3. Align the new DIMM above the socket.

Only touch the rear corners of the DIMM. Pressing on the heat sink or other DIMM

components can damage the hardware.

The top of the DIMM is smooth. The bottom edge has two different-length sets of contacts,

which connect to the slots on the socket.

Important - Be careful, there are sharp metal parts in the appliance, like the

heat sink fin and bracket, that can cause injury and damage the hardware.

4. Press the new DIMM into the socket until it clicks into position.

The retaining clips move into the lock position as you press the DIMM into position.

Important - Make sure that there are no leftover parts inside the appliance.

5. Make sure the memory DIMM(s) are installed correctly.

a) Replace the appliance cover without using the appliance cover screws.

b) Connect the power cords to the appliance.

c) Turn on the appliance using the power switch at the rear of the appliance.

d) Make sure that the LCD screen shows the appliance model.

6. Use the four appliance cover screws to secure the cover on the appliance.

Attaching the New Warranty Sticker

After you install the new memory DIMM(s), attach the new warranty sticker on the appliance.

Important - Failing to attach the new warranty sticker correctly will void the warranty

of the appliance.

To attach the new warranty sticker:

1. Make sure that the appliance operates correctly.

2. Attach the new warranty sticker from the upgrade kit to the appliance.

The warranty sticker covers an appliance cover screw.

3. Clearly write this information on the sticker:

Date of upgrade.

Current RAM memory and LOM card configuration of the appliance.

Removing Memory DIMMs

Make sure that you prepare the appliance before you remove memory DIMMs. For more

information, see Preparing the Appliance.

To remove memory DIMMs from the appliance:

1. Press the two retaining clips outward.

2. Carefully pull the DIMM up.

Only touch the rear corners of the DIMM. Pressing on the heat sink or other DIMM

components can damage the hardware.

If necessary, pull one end of the DIMM, then the other, to gradually release it from the

contact pins.

Important - Make sure that there are no leftover parts inside the appliance.

3. Make sure the memory DIMM(s) are installed correctly.

a) Replace the appliance cover without tightening the appliance cover screws.

b) Connect the power cords to the appliance.

c) Turn on the appliance using the power switch at the rear of the appliance.

d) Make sure that the LCD screen shows the appliance model.

4. Tighten the two appliance cover screws to secure the cover on the appliance.

Otros manuales para 12200

Tabla de contenidos

Otros manuales de Puerta de Checkpoint

Checkpoint

Checkpoint 26000 Manual de usuario

Checkpoint

Checkpoint 16000 Manual de instrucciones

Checkpoint

Checkpoint Quantum Spark 1570R Manual de usuario

Checkpoint

Checkpoint Power-1 Manual de usuario

Checkpoint

Checkpoint 13000 Series Manual de usuario

Checkpoint

Checkpoint 730 Manual de usuario

Checkpoint

Checkpoint R80.20 Manual de usuario

Checkpoint

Checkpoint 3000 Series Manual de usuario

Checkpoint

Checkpoint SandBlast TE2000XN-28VM Manual de usuario

Checkpoint

Checkpoint QUANTUM SPARK 1500 Manual de instrucciones

Checkpoint

Checkpoint 15000 Manual de usuario

Checkpoint

Checkpoint 1535 Manual de usuario

Checkpoint

Checkpoint QUANTUM SPARK 1595R Manual de usuario

Checkpoint

Checkpoint 3000 Series Manual de usuario

Checkpoint

Checkpoint QUANTUM SPARK 1535 Manual de usuario

Checkpoint

Checkpoint QUANTUM SPARK 1600 Manual de usuario

Checkpoint

Checkpoint QUANTUM SPARK 1570 Manual de usuario

Checkpoint

Checkpoint 13000 Series Manual de usuario

Checkpoint

Checkpoint Quantum Spark 1570R Manual de usuario

Checkpoint

Checkpoint 21400 VSX G-50 Manual de usuario

Checkpoint

Checkpoint VSX-1 3070 Manual de usuario

Checkpoint

Checkpoint 16000 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario