5
Do not use large amounts of water when cleaning the device, as it
may cause damage to the internal electronics.
Always disconnect device from mains power before cleaning.
Warranty/Liability
The period of warranty shall be eighteen (18) months, beginning
on the date of purchase. Please retain your receipt as proof of
purchase.
No responsibility shall be accepted for damage caused through any
of the following reasons: unsuitable or improper storage or use,
incorrect installation or commissioning by the owner or third
parties, natural wear and tear, changes or modifications, incorrect
or negligent handling, chemical, electrochemical, or electrical
interference.
All maintenance, technical inspections, and repairs should be
conducted by an authorized Charder service partner, using original
Charder accessories and spare parts. Charder is not liable for any
damages arising from improper maintenance or usage.
The device has an expected service life of 5 years when correctly
handled, serviced, and periodically inspected in accordance with
manufacturer's instructions.
Maintenance
Do not place the device in direct sunlight, or in close proximity to
an intense heat source. Excessively high temperatures may
damage the internal electronics.
Do not under any circumstances dismantle or alter the device, as
this could result in electric shock or injury as well as adversely
affect the precision of measurements.
The device is intended for indoor use only.
Device does not require routine user maintenance. However,
regular checking of accuracy is recommended; frequency to be
determined by level of use and state of device, or local
metrology/measuring instrument regulations if applicable. If
results are inaccurate, please contact local distributor.
Observe permissible ambient temperatures for use
The device has an expected service life of 5 years when correctly
handled, serviced, and periodically inspected in accordance with
manufacturer's instructions.
