To select a CTCSS privacy code:
1. After selecting a channel, press the Menu/Power
button until the CTCSS icon appears and the small
numbers next to the channel number flash on the
display.
2. Press using the Up or Down button to select
a privacy code. You can hold the Up or Down button
for fast advance.
3. When your desired CTCSS privacy code is
displayed, press the Menu/Power button to enter the
new setting and proceed to other functions, or press
PTT button to enter the new setting and return to
Standby mode.
If DCS is turned on at the channel selected,the display
will flash the CTCSS icon and “OFF.”To switch from DCS
to CTCSS, press the Up or Down button while the display
is flashing “OFF.”The display will then show the small
numbers flashing and you will then be able to proceed to
step 2.
Privacy Code
Set CTCSS Privacy Codes
Set DCS Privacy Codes
DCS Privacy Code
To select a DCS privacy code:
1. After selecting a channel, press the Menu/Power
button until the DCS icon appears and the small
numbers flash on the display (01 through 104).
If CTCSS is turned on at the channel selected, the
display will flash the DCS icon and “OFF.”To switch
from CTCSS to DCS, press the Channel Up or Channel
Down button while the display is flashing “OFF.”The
display will then show the small numbers flashing and
you will then be able to proceed to step 2.
2. Press using the Up or Down button to select a DCS
privacy code. You can hold the Up or Down button for
fast advance.
3. When DCS privacy code is displayed, press the
Mode/Power button to enter the new setting and proceed
to other functions, or press PTT button to enter the new
setting and return to Standby mode.
