Chamberlain KLIK3U-BK2 Manual de usuario

UNIVERSAL REMOTE CONTROL

The remote control can be programmed to activate

up to two products, such as a garage door opener,

gate operator, or commercial door operator. Each

button on the remote control works independently

of the other and must be programmed separately.

The images throughout this manual are for

reference only and your product may look different.

MODEL KLIK3U-BK2

MODEL KLIK3U-BL2

MODEL KLIK3U-SS

MODEL KLIK3U-RT1

MODEL KLIK3U-RT2

To prevent possible SERIOUS INJURY or

DEATH from a moving gate or door:

• ALWAYS keep remote controls out of reach

of children. NEVER permit children to

operate, or play with remote control

transmitters.

• Activate gate or door ONLY when it can be

seen clearly, is properly adjusted and there

are no obstructions to door travel.

• ALWAYS keep gate or door in sight until

completely closed. NEVER permit anyone to

cross path of moving gate or door.

Read instructions thoroughly BEFORE

beginning. If using the Universal

Remote Control with residential door

openers, the remote control must be

used only with door openers

manufactured after 1993 that utilize photoelectric

sensors. The photoelectric sensors are always

located on or near the bottom of the door track.

STOP

GETTING STARTED

Determine if the product you are programming the

remote control to has a Program/LEARN button or

DIP SWITCHES. The Program/LEARN button or DIP

SWITCHES are located either on the product or in

an external receiver on or near the product. The

following instructions are for a garage door opener

with a Program/LEARN button. For DIP SWITCH

programming instructions or additional help please

visit www.chamberlain.com/klik3.

Program/

LEARN Button

DIP Switch

WARNING: This product can expose you to

chemicals including lead, which are known

to the State of California to cause cancer

or birth defects or other reproductive

harm. For more information go to

www.P65Warnings.ca.gov

PROGRAMMING

Remove the cover. Press and hold the

program button until the LED turns on.

Program

Button

Press and release the Program/LEARN button

on your garage door opener.

LED

Select a button to program. Press and release

the button the specified number of times

according to the chart on the following page.

Make sure the LED stops flashing between

each press of the button. The garage door

opener will respond by clicking, blinking, or

activating.

Cover

PROGRAMMING (continued)

Garage Door

Opener Brand Type/Color

of Program/

Learn button

Year Number

of times

to press

button

Linear®Mega-Code ’97-Current 1

Chamberlain®* Orange/Red ’97-’03 2

Chamberlain®* Purple ’05-Current 3

Chamberlain®* Green ’93-’96 4

Genie® **

Overhead Door®Intellicode ’05-Current 5

Genie®

Overhead Door®Intellicode ’95-Current 6

Stanley®Secure Code ’98 7

Chamberlain®* Yellow ’11-Current 8

Wayne Dalton®Rolling Code ’99 9

Press the program button on the remote

control to save.

Program Button

*NOTE: LiftMaster, Do-It, Master Mechanic,

Raynor, True Value and Sears Craftsman are

compatible with Chamberlain technology.

**NOTE: Visit www.chamberlain.com/klik3 for

Genie Intellicode II instructions.

TEST

Test the remote control by pressing the button. If

the garage door opener does not activate, repeat

the programming steps or visit

www.chamberlain.com/klik3 for additional

instructions.

To prevent possible SERIOUS INJURY or

DEATH:

• NEVER allow small children near batteries.

• If battery is swallowed, immediately notify

doctor.

To reduce risk of fire, explosion or chemical

burn:

• Replace ONLY with 3V CR2032 coin

batteries.

• DO NOT recharge, disassemble, heat above

212°F (100°C) or incinerate.

Dispose of batteries properly.

Replace ONLY with

3V CR2032 coin batteries.

Battery

BATTERY

NOTICE: To comply with FCC and or Industry Canada (IC)

rules, adjustment or modifications of this receiver and/or

transmitter are prohibited, except for changing the code

setting or replacing the battery. THERE ARE

NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR

OFFICE USE. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2)this device must accept any

interference received, including interference that may

cause undesired operation.

Need Help?

Go to www.chamberlain.com/klik3

or call 1-800-442-1255

All trade names used herein are trademarks of respective

manufacturers listed.

Otros manuales para KLIK3U-BK2

Tabla de contenidos

Otros manuales de Mando a distancia de Chamberlain

Chamberlain

Chamberlain KLIK3U Manual de usuario

Chamberlain

Chamberlain 972LM Manual de usuario

Chamberlain

Chamberlain 953C Manual de usuario

Chamberlain

Chamberlain 4330EML Manual de usuario

Chamberlain

Chamberlain KLIK3C-BK2 Manual de usuario

Chamberlain

Chamberlain 953EV Manual de usuario

Chamberlain

Chamberlain LiftMaster Security+ 372LM Manual de usuario

Chamberlain

Chamberlain LiftMaster Security+ 327LM Manual de usuario

Chamberlain

Chamberlain 821LMC-S Manual de usuario

Chamberlain

Chamberlain Security+ 963D Manual de usuario

Chamberlain

Chamberlain KLIK3U-BK Manual de usuario

Chamberlain

Chamberlain LiftMaster 535LM Security+ Manual de usuario

Chamberlain

Chamberlain 84330AML Manual de usuario

Chamberlain

Chamberlain E940C Manual de usuario

Chamberlain

Chamberlain LiftMaster Professional 82LM Manual de usuario

Chamberlain

Chamberlain 892LT Manual de usuario

Chamberlain

Chamberlain 850 Series Manual de usuario

Chamberlain

Chamberlain LiftMaster 973W Security+ Manual de usuario

Chamberlain

Chamberlain Security+ 950C Manual de usuario

Chamberlain

Chamberlain 892LT Manual de usuario

Chamberlain

Chamberlain 312HMC Manual de usuario

Chamberlain

Chamberlain LiftMaster 94330E Manual de usuario

Chamberlain

Chamberlain LIFT-MASTER 83LM Manual de usuario

Chamberlain

Chamberlain CPTKX Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación