Challenger AT61 GSM Text Auto Dialer Manual de usuario

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

AT61 GSM Text Auto Dialer Manual

Introduction

AT61 GSM Text Auto Dialer is an advanced component that when triggered it will send a text

message up to 3 different telephone mobile numbers. If the AT61 dialer is connected to a Force10

intruder control panel then you have the additional feature to be able to ARM and DISARM via short

message text message on your mobile phone.

Compatible Networks: Vodafone, EE/Orange, O2

Feature

1. You can register a maximum three mobile numbers

2. one master code (default pin: 0123) to setup/program the dialer

3. Tamper protect function.

4. Modify pin

5. SMS COMMAND to set control panel going to Arm and disarm mode (Force 10 Panels only)

6. Eight terminals (five input for trigger as: Intruder, PA, ABORT, SET+ and Fire, two input for power

supply DC 13V + and DC 13V -, one output terminal PTS for to control ARM or DISARM for

control panel.

7. GSM receiving signal level indicated on LCD display.

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

IMPORTANT NOTE: To enable the remote text function for Arm/Disarming and notification of Set/Unset with a

compatible Force10 Control Panel, then the below programming options will need to be configured from the Engineering

menu on the Force 10 control panel

1).Enable below features at Force-10 control panel

-[Setup system]->[Flag2]->[Key switch]->select “ON”

-[Setup system]->[Flag2]->[Strobe on set]->select “ON”

2).Once the GSM dialer (mobile phone is set) and is powered on, the preset mobile phone will receive below

message

SET off

FIRE Trigger

ABORT Trigger

PANIC Trigger

3).If “Tamper” or “Panic Alarm (PA) is triggered under “DAY” mode, the preset mobile phone will receive below

message

INTRUDER Trigger

4).All trigger of “Alarm”, “Tamper”, “Panic Alarm (PA)” under “SET” mode (armed status) will send message of

“INTRUDER Trigger”

Wiring diagram

1). The supplied relay module will need to be used with security control panels without communicator outputs.

Below diagram illustrating connection to a

Force-10 control panel.

GSM Dialler

Force-10 Alarm Control Panel

External TF Board

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

2). Connection with Force10 Main Panel with built-in communicators outputs

(AP10LEDC, AP11LEDC, AP11LCDC)

Usage

How to setup Force10 Control Panel ‘Key switch’ function

·Operate Control panel, setup key switch function

·Enter Manager program mode

Press

·Press key to require the Manage to authorize Engineer

access.

·Press to accept. It will give a 3hr window to operate

the Engineer operation mode.

·Press to accept, the accept tone will be generated.

·Press to go back DAY mode.

·Input 4-digit Engineer code and go to

MANAGER MENU

Authori

e Engr?

Engr Authorised

for 3 hours

MANAGER MENU

Set Chime Zones?

MANAGER MENU

Setup

Codes

00:26:15 08-Aug

DAY

LC ENGINEER MENU

Setup Programs?

P OR G

0 1 2 3

P OR G

R ES TE

9 9 9 9

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

Engineer operation widow within 5 seconds.

·Press keys go into Setup System function.

Press keys go into Setup Flags 2

·Press key accept be selected flag.

·Press or key to toggle ON/OFF,

·Press to save.

·Press to go back DAY mode.

GSM Dialer Power on Message

NOTE: Insert Sim card before applying Power

·Display software version.

·Initial GSM module.

·For initial power will take approx 1minute to setup GSM module.

·When no SIM, display “SIM not inserted”

·GSM module has finished, normal display:

When

no SIM card inserted or incompatible network:

Init GSM Module

. . . . . . . . . . . . . .

Init GSM Module

SETUP SYSTEM

Flag

SELECT FLAG 2

Key switch

P OR G

Key switch

OFF

P OR G

Key switch

O IM T



SELECT FLAG 2

PTS as Doorbel

00:26:15 08-Aug

DAY

R ES TE

P OR G

LCD GSM DIALER

Version: V

3.91x

SIM not inserted

08:00 01-Dec

DAY

08:00 01-Dec

DAY

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

When the SIM card requires PIN, or poor signal quality:

Defaulting Panel to Factory Settings

You will change the value of all parameters to factory default.

CAUTION: All configurations of the panel are restored to factory default conditions.

To default to factory settings:

·Power down the GSM LCD Dialler.

·Press and hold keys.

·Power up.

Wait about 3 seconds, LCD display

“Reset NVM OK”

Release press keys and system initial GSM module.

How to Change USER CODE using self-user code

·System in Day mode

or system in SET mode.

·To enter User Menu

Press

·Input new code (4-digit)

·Press to save and return to Day mode.

If the 4-digits is the same as old, then display ‘Duplicate Code’

press any key return to Day mode and no change code.

Enter your code

*****

Enter new code

****

08:00 01-Dec

DAY

POR G

P OR G

Duplicate Code!

08:00 01-Dec

Init GSM Module

R ES TE

Reset NVM OK

LCD GSM DIALER

Version: V

3.91x

08:00 01-Dec

DAY

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

How to Set up the system

The full menu structure for the panel can only be accessed while in Master Program Mode. The structure is

shown in the following table:

How to go into Master Program Mode

·System work in Day mode

or system in SET mode.

·Go into Master Menu

Press

·Master Menu display.

1=Register Mobile

There are 3 Mobile Number can be created in the system,, all are 16-digit and can be set.

1 = Mobile Number 1, 2 = Mobile Number 2, 3 = Mobile Number 3

How to change Mobile number

Under Master Menu.

·Press keys go into Setup Codes function.

Press … or or key to select a Mobile Number

that you want to program.

Note: = mobile number 1, … = mobile number 3

MENU OPTIONS

1 Register mobile

2 Set up codes

3 View Event log

4 Set up system

Enter your code

*****

MASTER MENU

P OR G

0 1 2 3

08:00 01-Dec

DAY

MASTER MENU

P OR G

Mobile Number 1?

O IM T



08:00 01-Dec

DAY

08:00 01-Dec

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

·Press key to accept and go into set the mobile number.

Set new mobile number: 13686196127

Input new mobile number:

·Press to save. or Press key will without change the

mobile number and to go to modify next mobile number, if the

number is “Mobile Number 3”, it will leave “Register Mobile”

and go to next menu “Setup Codes”

·Press to return to master menu.

How to delete Mobile number

Under Master Menu.

·Press keys go into Setup Codes function.

Press … or or key to select a Mobile Number

that you want to set.

Note: = mobile number 1, … = mobile number 3

·Press key to accept and go into set the mobile number.

·Press key to clear the mobile number display.

·Press to accept delete the mobile number. or Press key

will without change the mobile number and to go to modify next

mobile number, if the number is “Mobile Number 3”, it will leave

“Register Mobile” and go to next menu “Setup Codes”

·Press to return to master menu.

2= Setup Codes

There are 4 user codes can be created in the system, all are 4-digit and can be set to any number from 0000 to

9999. The access codes ensure that only authorized users can operate the system.

SETUP MOBILE NUM

P OR G

SETUP MOBILE NUM

P OR G

R ES TE

MASTER MENU

Setup Codes

R ES TE

Mobile Number 3

MASTER MENU

P OR G

SETUP MOBILE NUM

P OR G

Mobile Number 1?

O IM T



SETUP MOBILE NUM

MASTER MENU

Setup Codes

R ES TE

O IM T

Mobile Number 3

P OR G

R ES TE

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

1 = user 1, 2 = user 2, 3 = user 3, 4 = master

User 1 – User 3 codes:

The user 1 to user 3 codes have the same operation for testing and Setting and Unsetting, changing their

own code.

Master code

To operate the alarm system you will need to use a code. A code is 4 digits long, and can be any

number from 0000 to 9999. By default master code is but you should change this

as soon as possible.

How to change User Code

This option allows each of the users to be given a code.

Under Master Menu.

·Press keys go into Setup Codes function.

Press … or or key to select a code

that you want to set.

Note: =user 1, … = user 3, … = master

·Press to accept and go into set the user.

·Press key to select Change Code function.

·Press key go into Change Code function.

·If no code programmed, then display

·Input new code (4-digit)

·Press to save. If the 4-digits is the same as old, then display

‘Duplicate Code’

press any key to leave, it goes to “Delete Code”

·Press key will without change the code and exit.

·Press key to return to master menu.

How to delete User Code

Under Master Menu.

·Press keys go into Setup Codes function.

MASTER MENU

Setup Codes

SELECT CODE

User 1?

P OR G

O IM T

P OR G

USER CODE

****

USER CODE

. . .

P OR G

SETUP CODE

Delete Code

R ES TE

MASTER MENU

Setup Codes

P OR G

SETUP CODE

Change Code

0 1 2 3

R ES TE



Duplicate Code!

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

Press … or or key to select a code

that you want to set.

Note: =user 1, … = user 3, … = master

·Press to accept and go into set the user.

·Press key to select Delete Code function.

·Press key will go into delete the user code function.

·Press key will delete the user code or press key to cannel

and go to modify next code.

·If the code is “Master codes”, it will leave

“Setup Codes” and go to next menu “View Event Log”.

Press to return to master menu.

3 = View Event Log

The event log gives displays of all the events that have taken place. The events are organised by date and time.

Up to 43 events can be stored in the memory. When the log reaches 43 events any new events will overwrite

the oldest events. The system is known as FILO (First In Last Out).

To view the event log:

Under Master Menu

·Press key to select View Event Log function.

·Press to accept and most recent event shown first.

·View older event log using or key.

·View newer event log using or key.

·View oldest event log using key.

·View newest event log using key.

Delete the Code?

Press PG for yes

MASTER MENU

View Event Log?

P OR G

SETUP CODE

Delet

e Code

MASTER MENU

View Event Log?

FIRE Trigger

08:12 05

Dec 43

P OR G

O IM T

PANIC Trigger

08:12 04

Dec 42

R ES TE

SELECT CODE

User 1?

O IM T

P OR G



FIRE Trigger

08:12 05

Dec 43



INTRUDER Trigger

08:08 01

Dec 01

FIRE Trigger

08:12 05

Dec 43

SELECT CODE

Master Code?

P OR G

R ES TE

AT61 GSM Text Auto Dialer Manual

Challenger_AT61 _Instructions_Rev01

·Press to select clear all alarm events.

·Press to accept.

·or Press to cancel and go to next menu “Setup System”.

4 = How to Setup System

How to Setup Set Time

The time can be modified in hours, minutes in the format HH:MM. you must set it correctly, or else System

will generate an error tone and not save the changes.

Under Master Menu.

·Press keys go into Setup System function.

·Press to select Set Time function.

·Press to accept. Display current time.

set new time to 12:02

·Press number keys.

·Press to save it and clear second time, or press to

cancel, it will exit and go to “Set Date”.

How to Setup Set Date

The date can be changed in day, month, year format DD/MM/YY. The method of set date is the same as

how to set time.

e.g. Set current system date: 28-04-2017

Under Master Menu.

SETUP SYSTEM

Set Time

Set Time HH:MM

0:00

MASTER MENU

Set Date

Set Time HH:MM

12:0

P OR G

R ES TE

P OR G

2 2

R ES TE

MASTER MENU

etup System

P OR G

MASTER MENU

etup System

Clear Event Log

Press PG for yes

P OR G

MASTER MENU

Setup Syst

em?

Tabla de contenidos

Manuales populares de Accesorios para teléfono de otras marcas

IAI

IAI CON-T Manual de usuario

BT DIVERSE 5400 Manual de usuario

Tadiran Telecom

Tadiran Telecom EMERALD ICE Manual de usuario

Musicam

Musicam FieldFone II Manual de usuario

Polycom

Polycom KIRK KIRK 4040 Hoja de especificaciones

TIPTEL

TIPTEL DECT Set 50 Manual de usuario

Panasonic

Panasonic KX-UDS124 Manual de usuario

BT BT7600 Hoja de especificaciones

Panasonic

Panasonic KX-TVP100E Manual de usuario

View

View VP-PC Manual de usuario

Baldwin Boxall

Baldwin Boxall BT8 Manual de usuario

SMC Networks

SMC Networks SMCDPCR-AP Manual de usuario

SkyLink

SkyLink SD-001 Manual de usuario

Nera

Nera ISDN Manual de usuario

MCheeta

MCheeta CT-CID803 Plus Manual de usuario

YASKAWA

YASKAWA YRC1000 Manual de usuario

Intellitouch

Intellitouch MOH-500E Manual de usuario

Viking

Viking SQRG-12 Instrucciones de uso