4
1. Recommendations regarding safety
The following requirements shall be complied
with.
The device should be used as intended,
keeping it in a dry environment and
installing it only indoors.
The thermostat has small parts, so keep
it away from children.
Before connecting the radio module to
the control unit, absolutely stop the
operation of the control unit by switching
it off and disconnecting it from the main
power supply.
Non-compliant with the manual or
incorrect connection of the radio module
to the control unit may be a source of
malfunction of the control unit and the
radio module itself.
The device should only be started up by a
person who is familiar with these
instructions.
Under no circumstances may the device
construction be modified.
2. General information
The HPx40CM room thermostat is designed
for wireless cooperation with HPrfCM radio
transmission module, which is wired to the
control unit. The thermostat is installed in a
selected room, e.g. a living room and is
designed to maintain a preset room
temperature by sending a radio signal to a
module connected to the control unit. The
implemented encrypted, two-way radio
communication allows the transmission of
information from the control unit to the
thermostat alarm statuses of the control unit
and external temperature values. The
thermostat on the backlit LCD display shows
information about the room temperature
value, selected operating mode, current time
with simultaneous clock synchronization with
the control unit.
Radio communication: 1 –HPx40CM thermostat, 2
–HPrfCM radio module, 3 –HPCU360iCM control
unit.
3. Information about documentation
The thermostat manual is a supplement for
the control unit manual. In particular, except
for this manual, the control unit manual
should also be followed. Manufacturer is not
responsible for any damages caused by
failure to following these instructions.
4. Storage of documentation
This assembly and operation manual, as well
as any other applicable documentation,
should be stored diligently, so that it is
available at any time. In the case of removal
or sale of the device, the attached
documentation should be handed over to the
new user / owner.
5. Applied symbols
In this manual the following graphic symbols
are used:
- the symbol indicates additional
advice and information.
- the symbol indicates important
information.
Caution: the symbols indicate important
information, in order to make the manual
more user friendly. Yet, this does not exempt
the user from the obligation to comply with
requirements which are not marked with a
graphic symbol!
6. Declaration of conformity
The purchased product meets the
requirements of Directive 2014/53/EU of
the European Parliament and of the
Council of 16 April 2014 on the
harmonization of the laws of the Member
States concerning making available on the
market of radio equipment and does not
cause harmful interference with radio
communications to other equipment, in a
residential area, provided that the product is
correctly installed and used in accordance
with the requirements of this manual.
7. Directive WEEE 2012/19/UE
Purchased product is designed and made of
materials of highest quality. The product
meets the requirements of the Directive
2012/19/EU of 4 July 2012 on waste
electrical and electronic equipment
