Centrix D20 Manual de usuario
HDVS IP CAMERA
D20 & D50
User Manual
Table of Contents
1. Overview ................................................................................................................................. 3
1.1 Features ....................................................................................................................... 3
1.2 Package Contents....................................................................................................... 4
1.3 Camera Dimensions ................................................................................................... 5
1.4 Connectors................................................................................................................... 6
2. Camera Cabling..................................................................................................................... 7
2.1 Connect Power ............................................................................................................ 7
2.2 Connect Ethernet Cable ............................................................................................. 7
2.3 Connect Alarm I/O....................................................................................................... 7
3. System Requirements ......................................................................................................... 8
4. Access Camera ..................................................................................................................... 9
5. Setup Video Resolution..................................................................................................... 13
6. Conguration Files Export / Import................................................................................ 14
Appendix A: Technical Specications......................................................................................... 15
Appendix B: Delete the Existing DC Viewer ............................................................................... 19
Appendix C: Setup Internet Security........................................................................................... 20
Appendix D: Video Resolution..................................................................................................... 21
2M- Quad Streams .................................................................................................................. 21
2M- Triple Streams .................................................................................................................. 25
2M- Dual Streams.................................................................................................................... 27
2M- Single Stream................................................................................................................... 27
2M Real time / 3M / 5M- Quad Streams.................................................................................. 28
2M Real time / 3M / 5M- Triple Streams.................................................................................. 33
2M Real time / 3M / 5M- Dual Streams ................................................................................... 36
2M Real time / 3M / 5M- Single Stream................................................................................... 37
3
1. Overview
The IP Camera features decent low light performance, high resolution up to 5 Mega-
pixel, various video resolution combination, multiple video compression formats, etc.
It supports true day / night and 3DNR function, which display clear images in low light
conditions. Moreover, the proprietary SPQ (Smart Picture Quality) function allows de-
livering quality images especially under intensive motion and low light conditions. With
the built-in IR LED module, the IP Camera makes visibility in nearly total darkness.
With H.264 High / Main / Baseline prole and MJPEG video compression formats sup-
port, it is benecial for optimization of bandwidth and network resources. Video quad-
stream support allows various surveillance applications and facilitates working with other
back-end devices.
1.1 Features
Progressive Scan CMOS Sensor
Quad Streams Compression: H.264 Baseline / Main/ High Prole + MJPEG
Multi-language Support
Tampering Alarm
Remote Zoom & Focus (Motorized Lens)*
Wide Dynamic Range
Motion Detection
Privacy Masks
Smart Picture Quality / 3D Noise Reduction
Vertical View Mode (Image rotation by 90 degrees)
Smart IR Mode
Network Failure Detection
Day/Night (ICR)
IR LED Module (working distance up to 25m)*
Micro SD support
BNC analog output
ONVIF Support
(*) Optional
4
1.2 Package Contents
Please check the package contains the following items listed below.
Camera Package Contents
Lightweight Fixed Dome IP Camera
Power Terminal Block Security Torx
Self Tapping Screws
(×4) Plastic Screw Anchors
(×4)
Rubber Washers (×6)
CD
(bundled software and
documentation)
Quick Guide
5
1.3 Camera Dimensions
The IP Dome Camera’s dimensions are shown below.
6
1.4 Connectors
The diagram below shows the IP Dome Camera’s reset button and various connectors.
Denition for each connector will be given as follows.
No. Connector Pin Denition Remarks
1Reset Button - Restore to factory default
2BNC -Analog Video Output
3
Alarm I/O
2
3
4
1GND (Input－)
Alarm connection
Input＋
Output－
Output＋
4
Audio I/O
2
3
4
1 Output (L)
Two-way audio transmission
Output
(R)
GND
Input
5 Power
DC 12V
1Power
Power connection
2Reserved
3GND
AC 24V
1Power-1
2Earth GND
3Power-2
6 RJ-45 -10/100 Mbps Ethernet / PoE
7
2. Camera Cabling
Please follow the instructions below to complete IP Camera connection.
2.1 Connect Power
Please refer to Section: Connectors. Alternatively, connect the Ethernet cable to the
camera’s PoE port and plug the other end of the cable into a PoE switch.
NOTE: If using PoE, make sure Power Sourcing Equipment (PSE) is in use
in the network.
2.2 Connect Ethernet Cable
Use of Category 5 Ethernet cable is recommended for network connection; to have best
transmission quality, cable length shall not exceed 100 meters. Connect one end of the
Ethernet cable to the RJ-45 connector of the IP Dome Camera, and the other end of the
cable to the network switch or PC.
NOTE: In some cases, you may need use an Ethernet crossover cable
when connecting the IP Dome Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs; if the LEDs are unlit,
please check LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light ashes for network activity indication.
2.3 Connect Alarm I/O
The camera equips one alarm input and one relay output for alarm application. Refer to
alarm pin denition below to connect alarm devices to the IP Camera if needed.
PIN 1: GND (Input-)
PIN 2: Input+
PIN 3: Output-
PIN 4: Output+
8
3. System Requirements
To perform the IP Camera via web browser, please ensure your PC is in good network
connection, and meet system requirements as described below.
Items System Requirement
Personal Computer
1. Intel®Pentium® M, 2.16 GHz or
Intel®CoreTM2 Duo, 2.0 GHz
2. 2 GB RAM or more
Operating System Windows VISTA / Windows XP / Windows 7
Web Browser Microsoft Internet Explorer 6.0 or later
Firefox
Chrome
Safari
Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
9
4. Access Camera
For initial access to the IP Camera, users can search the camera through the installer
program: DeviceSearch.exe, which can be found in “DeviceSearch” folder in the sup-
plied CD.
Device Search Software Setup
Step 1: Double click on the program Device Search.exe. After its window appears,
click on the <Device Search> button on the top side.
Step 2: The security alert window will pop up. Click on <Unblock> to continue.
Device Search
Step 3: Click on <Device Search> again, and all the nding IP devices will be listed in
the page. The IP Camera’s default IP address is: 192.168.0.250.
Step 4: Double click or right click and select <Browse> to access the camera directly
via web browser.
Step 5: Then the prompt window of request for entering default username and pass-
word will appear for login to the IP Dome Camera.
The default login ID and password for the Administrator are:
Login ID Password
admin admin
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator’s password be altered for
the security concerns. Refer to Full HD Multiple Streams IP Camera Menu Tree
for further details.
10
Additionally, users can change the IP Camera’s network property, either DHCP or Static
IP directly in the device nding list. Refer to the following section for changing the IP
Camera’s network property.
Example of Changing IP Camera’s Network Property
Users can directly change an IP Camera’s network property, ex. from static IP to DHCP,
in the nding device list. The way to change the IP Camera’s network property is speci-
ed below:
Step 1: In the nding device list, click on the IP Camera that you would like to change
its network property. On the selected item, right click and select “Network Setup.”
Meanwhile, record the IP Camera’s MAC address, for future identication.
Step 2: The “Network Setup” page will come out. Select “DHCP,” and press
“Apply” button down the page.
Step 3: Click on <OK> on the Note of setting change. Wait for one minute to re-search
the IP Camera.
Step 4: Click on the <Device Search> button to re-search all the devices. Then select
the IP Camera with the correct MAC address. Double click on the IP Camera, and the
login window will come out.
Step 5: Enter User name and Password to access the IP Camera.
Installing DC Viewer Software Online
For the initial access to the IP Camera, a client program, DC Viewer, will be automati-
cally installed to your PC when connecting to the IP Camera.
If the Web browser doesn’t allow DC Viewer installation, please check the Internet secu-
rity settings or ActiveX controls and plug-ins settings (refer to Section: Internet Security
Settings) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for permission to
install the ActiveX Control for displaying video in browser. Right click on the Information
Bar and select <Install ActiveX Control…> to allow the installation.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara IP de Centrix
