Centrality PA168X Manual de usuario
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc
PA168X SIP Phone User Manual
¾
PA168X IP phone Appearance Introduction:
................................................................... 2
¾
Function Keys of PA168X IP Phone Introduction
.......................................................... 3
¾
Features
................................................................................................................................4
¾
Standard and Protocol
......................................................................................................... 5
¾
Operating requirements
...................................................................................................... 6
¾
Electric requirements
........................................................................................................... 6
¾
Size
........................................................................................................................................ 6
¾
Installation
............................................................................................................................. 6
¾
Configuration
......................................................................................................................... 7
¾
Phone Keypad set
................................................................................................................ 7
¾
Configured by WEB
........................................................................................................... 10
¾
Telnet Configuration
.......................................................................................................... 26
¾
Upgrade PA168X IP phone
.............................................................................................. 45
¾
Usage of the phone
............................................................................................................ 45
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 2
¾PA168X IP phone Appearance Introduction:
●PA168X IP Phone Front Illustration (Refer to Fig 1.1):
Fig 1.1 PA168X IP Phone Front Illustration
●PA168X IP Phone Back Illustrations(Refer to Fig 1.2 ):
Local IP
Phone Number
Menu/Enter
LCD Display
Set
Missed
Received
Out
Backspace
Vol +
Vol -
Phone book
Flash
Hold
Transfer
Redial Speaker Call
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 3
Fig 1.2 PA168X Phone Back Illustration
¾Function Keys of PA168X IP Phone Introduction:
Keys Function Keys Function
Local IP
With handset hung, press this key
to display local IP address on LCD.
Missed
With handset hung, press this
key to review missed number.
Phone
number
With handset hung, press this key
to display phone number on LCD.
Received
With handset hung, press this
key to review received number.
Menu/
Enter
With handset hung, press this key to
menu mode. Enter the menu mode,
press this key to next menu and confirm.
Out
With handset hung, press this
key to review dialed number.
Set
Enter the menu mode，press this key
becomes to modify the appearance.
Redial
While reviewing missed,
received or dialed number,
press this key to dial current
number.
Backspace
Enter the menu mode; press this key to
back upper menu or delete.
Speaker
Press this key to have a call
without lifting the handset.
Volume+ With handset picked，press this key to Increase the volumes of handset；With pressing
To network To PC
Power Jack
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 4
speaker，press this key to Increase the volumes of speaker.
With pressing “missed” or“received” or “out” and then press this key to turn over the
record backward.
Enter the menu mode; press this key to turn over the item backward.
With handset picked，press this key to decrease the volumes of handset；With pressing
speaker，press this key to decrease the volumes of speaker.
With pressing “missed” or“received” or “out” and then press this key to turn over the
record forward.
Volume -
Enter the menu mode; press this key to turn over the item forward.
¾Features
¾Hardware
●Main chip—PA1688 50MHz
●Data Memory—2MB SDRAM
●Program Memory—2 MB Flash memory
●Ethernet Jack—2X 10/100M jacks
●AC/DC adapter—Input AC100--- 230V，Output 9V DC, 1A
¾Software
●DHCP support for LAN or Cable modem
●PPPoE support for ADSL or Cable modem
●Set phone by HTTP web browser (IE6.0) or Telnet
●Upgrade by FTP
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 5
●Support major G.7XX ;GSM610 audio codec
●VAD(Voice active detect)
●CNG (Comfort noise generation)
●Dynamic voice jitter buffer
●G.168/165 compliant 16ms echo cancellation
●Tone generation and Local DTMF re-generation according with ITU-T
●E.164 dial plan and customized dial rules
●100 entries for quick dial
●80 entries each for missed calls, answered calls and dialed calls
●Adjustable volume for both handset and speaker
●Voice prompt
●Hotline
¾Standard and Protocol
PA168X IP Phone supports following standard and protocol:
● IEEE 802.3 /802.3 u 10 Base T / 100Base TX
● Major G.7XX; GSM610 audio codec
● SIP (RFC 2543;RFC3261)
● TCP/IP: Internet transfer and control protocol
● RTP: Real-time Transport Protocol
● RTCP：Real-time Control Protocol
● VAD/CNG save bandwidth
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 6
● DHCP：Dynamic Host Configuration Protocol
● PPPoE：PPP Protocol over Ethernet
● DNS：Domain Name Server
● Telnet：Internet's remote login protocol
● FTP：File Transfer protocol
● HTTP：Hyper Text Transfer protocol
¾Operating requirements:
●Operation temperature: 0 to 50° C (32° to 122° F)
●Storage temperature: -30° to 65° C (-22° to 149° F)
●Humidity: 10 to 90% no dew
¾Electric requirements:
●Voltage: 9V DC
●Power: 9W (max.)
●Power adapter: AC/DC input 100-230V，output 9V 1A
●Network interface:2X RJ-45 Ethernet Connectors
¾Size：
200 x 180 x 85 mm (L x W x H)
¾Installation:
1． Connect handset to base: insert handset cord into handset cord jack at the
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 7
left side of the base.
2． Connect IP phone to Internet: plug the RJ-45 Ethernet cable into the
Ethernet Jack. Plug the other end of the cable into HUB switch.
3． Power on IP phone: plug the power cord adapter into the Power Jack. Then
plug the other end of the power cord adapter into the appropriate wall
outlet.
¾Configuration
Three ways of configuring the PA168X SIP phone are available: phone
keypad, web browser, Telnet commands.
¾Phone Keypad setup
●Function Keys Introduction: When using keypad and LCD to configure
the settings of IP phone, following keys will be used:
Keys Function Keys Function
Menu/Enter
Enter the menu and
confirm.
Set
Becomes to modify the appearance.
Backspace Delete and back
upper menu. Vol＋ Turn over menu backward.
Keypads Modify values Vol - Turn over menu forward.
Refer to above operation; you can reach any menu to modify any value.
Please refer to following structure illustrations to learn the values of each
menu item. As for the meaning of each item and value, please refer to
Web
Browser Setting
chapter.
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 8
●Menu Structure:
Fig 2.1 Main Menu structure Illustration
Fig 2.2 Network submenu structure Illustration
Fig 2.3 Audio submenu structure Illustration
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 9
Fig 2.4 Phone submenu structure Illustration
Fig 2.5 Protocol submenu structure Illustration
Fig 2.6 other submenu structure Illustration
PA168X SIP Phone User Manual (V1.42)
Beijing Centrality Communication Inc 10
Fig 2.7 advanced submenu structure Illustration
¾Configured by WEB
Double click icon to open the IE browser. Input the IP address of the
phone into address bar ( ), and then input
password of the phone into the following page.
Fig 3.1 Http Setting
Otros manuales para PA168X
1
Tabla de contenidos
Otros manuales de Teléfono IP de Centrality
