Celestron FirstScope 76EQ Hoja de especificaciones

Use the three tightening screws located at the

bottom of each leg to secure the extended legs

in place.

To set up the tripod, spread the legs outward

until they are fully extended. Extend the center

portion of each of the three tripod legs down 6-

8".

Item #31132

Quick Set-up Guide

123

All three legs should be the same length to

provide a level platform for the telescope.

Locate the equatorial mount and place the

base of the mount through the hole in the

center of the tripod mounting platform.

Properly assembled, the accessory tray should

appear as pictured above.

From underneath the tripod mounting platform,

thread the mounting bolt with washer into the

threaded hole on the bottom of the equatorial

mount.

Thread the latitude adjustment screw into the

equatorial mount until it is touching the inside

of the mount.

FirstScope 76EQ

Your FirstScope 76EQ includes: optical tube w/tube

ring attached; tripod with center support bracket;

equatorial mount; latitude adjustment screw; two

eyepieces; StarPointer finderscope; counterweight;

counterweight bar; two slow motion cables;

eyepiece accessory tray; The Sky™ CD software;

documentation including owner’s manual.

Item# 31032

Place the accessory tray on top of the tripod's

center leg brace. Thread the tray into the

threaded hole in the center of the leg brace.

Questions or Problems with Set-up?

CONTACT:

Celestron Technical Support: 310.803.5955

Quick Set-up Guide [cont]

Locate the counterweight bar and

counterweight. Slide the counterweight half

way down the counterweight bar and tighten

the locking screw to secure in place.

Thread the threaded end of the counterweight

bar into the Dec axis of the equatorial mount.

The longer cable should attach to the Right

Ascension axis and the shorter cable attaches

to the Declination axis as shown above.

Before mounting the tube, remove the two

wingnuts on the tube rings.

Place the tube on the mount by lining up the

screws with the mounting holes on the mount.

The focuser end of the telescope should be

over the counterweight assembly.

Reattach both wingnuts and tighten to secure

in place.

17 18

Orient the finderscope so that the glass

window is facing towards the front of the tube.

Place finderscope over the posts on the tube

and tighten it down with the knurled nuts.

19 20

Insert the chrome barrel of the 20mm eyepiece

into the focuser and tighten the set screw.

Remove the lens cap from the front of the

telescope. To observe, look through the

eyepiece as shown above.

Locate the finderscope. Remove the knurled

nuts on the threaded posts at the focuser end

of the telescope tube.

Slide the chrome end of the slow motion

control cables onto equatorial mount gear shaft

and tighten set screw to secure in place.

Loosen the set screw on the focuser so that it

does not obstruct the inner diameter of the

focuser.

For detailed usage information please consult your

owner’s manual.

Otros manuales de Telescopio de Celestron

Celestron

Celestron OmniXLT AZ Manual de usuario

Celestron

Celestron NexStar 102GT Manual de usuario

Celestron

Celestron AstroMaster 70AZ Manual de usuario

Celestron

Celestron 60EQ Manual de usuario

Celestron

Celestron EXPLORASCOPE 22100-CT-DS Manual de usuario

Celestron

Celestron TRAVEL SCOPE 60 DX Manual de usuario

Celestron

Celestron CGE800 Manual de usuario

Celestron

Celestron Rowe-Ackermann 11 V2 F/2.2 Manual de usuario

Celestron

Celestron PowerSeeker 21041 Manual de usuario

Celestron

Celestron COMETRON 114AZ Manual de usuario

Celestron

Celestron C11-SGT Manual de usuario

Celestron

Celestron 60EQ Manual de usuario

Celestron

Celestron PowerSeeker 70EQ Manual de usuario

Celestron

Celestron 80AZS Manual de usuario

Celestron

Celestron PowerSeeker 50AZ # 21039 Manual de usuario

Celestron

Celestron 52268 Manual de usuario

Celestron

Celestron StarSense Explorer DOB Manual de usuario

Celestron

Celestron SkyProdigy 102 Manual de usuario

Celestron

Celestron FirstScope 70EQ Hoja de especificaciones

Celestron

Celestron C11 Manual de usuario

Celestron

Celestron PowerSeeker 60AZ Manual de usuario

Celestron

Celestron STARSENSE EXPLORER 114 TABLETOP DOBSONIAN Manual de usuario

Celestron

Celestron 114LCM Manual de usuario

Celestron

Celestron 80AZS Manual de usuario

Manuales populares de Telescopio de otras marcas

Meade

Meade 81005 Condor Manual de usuario

Meade

Meade 114 EQ-DS Manual de usuario

Meade

Meade LX200 CLASSIC Manual de usuario

Leica

Leica 82 HD Manual de usuario

EASTCOLIGHT

EASTCOLIGHT 9920 Manual de usuario

zoomion

zoomion Genesis 200 EQ Manual de usuario

TEC

TEC APO 140 Manual de usuario

Orion

Orion 7832 Manual de usuario

Carson

Carson Skelescope SK-100 Manual de usuario

SKY-WATCHER

SKY-WATCHER VIRTUOSO Manual de usuario

Orion

Orion EZ Finder 7228 Manual de usuario

cassini

cassini C-JRS Manual de usuario

nedis

nedis SCTE5060WT Manual de usuario

Meade

Meade Polaris 60EQ-D Manual de usuario

PlaneWave

PlaneWave CDK700 Manual de usuario

William Optics

William Optics Synta Crayford Manual de usuario

Orion

Orion FUNSCOPE Manual de usuario

Levenhuk

Levenhuk Skyline Travel Manual de usuario