CDA FW822 Guía de inicio rápido

www.cda.eu

FW822

Integrated fridge

Installation, use and maintenance

Contents:

3 Important information

5 Important notes

5 Before ﬁrst use

6 Important notes on use of the fridge

8 Storage

9 Control panel

10 Care and cleaning

11 Defrosting the fridge

11 Changing the light

12 Troubleshooting

14 Installation preparation

14 Ventilation requirements

16 Installation into the cabinet

17 Mounting the fascia door

19 Reversing the appliance door

20 Electrical information

23 Energy eciency information

Important

The manufacturer cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note

that we reserve the right to invalidate the guarantee supplied with this

product following incorrect installation or misuse of the appliance.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualiﬁed personnel.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

EU Declarations of Conformity:

This appliance has been designed, constructed and marketed in

compliance with safety requirements of EU Directive 2014/35/EU (Low

voltage) and requirements of EU Directive 2014/30/EU (EMC).

This appliance has been manufactured to the strictest standards and

complies with all applicable legislation, including Electrical safety (LVD)

and Electromagnetic interference compatibility (EMC). Parts intended

to come into contact with food conform to 1935/2004/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.

At the end of its working life, the product must not be disposed of as

urban waste. The refrigeration system contains insulating gases and

refrigerants, which require specialised waste disposal. The valuable

materials contained in this appliance can be recycle. It must be taken

to a special local authority dierentiated waste collection centre or to

a dealer providing this service.

Before disposing of an old appliance, remove the door seals etc. to

reduce the risk of child entrapment.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health deriving from

inappropriate disposal and enables the constituent materials to be

recovered to obtain signiﬁcant savings in energy and resources. As a

reminder of the need to dispose of household appliances separately,

the product is marked with a crossed-out wheeled dustbin.

Important

•Never store inﬂammable or explosive items and strong corrosive

acids or alkalis in the appliance.

•This is a household appliance, which is produced in accordance

with the national standard. It is intended for food storage only, not

for storage of blood, medicine and biological products.

•To prevent risk of ﬁre, keep the appliance away from petrol or any

other inﬂammables.

•To prevent risk of electromagnetic interference or other accidents,

do not place a microwave oven on top of the refrigerator or use

any electric appliance inside the refrigerator.

•Do not allow children to play with or near the appliance.

•The internal surface of the fridge compartment is very cold when

the appliance is running. Do not touch the surface especially when

hands are wet.

•Do not splash water onto the appliance. Keep it away from places

of high humidity that may have adverse eect on the electric

insulation performance.

•This appliance is designed to be used in ambient temperatures

between 10 and 32˚C. Use outside of this range may cause the

appliance to fail.

Before ﬁrst use

You must allow the fridge to settle for at least twenty four hours

prior to switching the power on.

It is recommended that you clean the interior of the appliance prior to

ﬁrst use, using a solution of bicarbonate of soda and warm water and

then thoroughly drying the interior.

The fridge may have an odour to it at ﬁrst use. This will disappear as

the appliance cools.

Please note:

The appliance will start on temperature setting 3 and work

continuously until it comes down to the correct temperature.

If the appliance is switched o, you should allow ﬁve minutes

before switching it on again to prevent unnecessary damage to the

compressor.

Never store inﬂammable or explosive items and strong corrosive

acids or alkalis in the appliance.

This fridge cools your food by making the inside back of the cavity

cold. It is normal for frost to build up on this surface; it then dissipates

and drains through a small drain at the bottom, where it evaporates

harmlessly. The presence of frosting at the back is not a malfunction

of the fridge.

Fridge use

•Never put liquids in the refrigerator uncovered.

•Never put hot foods in the refrigerator. Warm food should be

allowed to cool to room temperature before being put into the

refrigerator.

•Nothing should rest against the rear wall of the refrigerator, as this

will cause frost and possible condensation problems which will be

dicult to remove.

•Make sure food is clean and any extra water is wiped away before

putting into the fridge.

•Wrap or cover food before putting into the fridge. This will help

prevent the loss of moisture, keep food fresh and avoid

unpleasant odours.

• Sort foods prior to storing. Any foods to be used soon should be

stored at the front of the shelf to prevent deterioration caused by

the door being open for prolonged periods.

•Do not overﬁll the fridge. There should be sucient space

between the foods to allow the cool air to circulate.

•Thawing frozen foods in the fridge compartment will help to keep

the temperature low and save energy.

•Never store raw meats on shelves above cooked meats or other

produce. This will help to prevent juices from raw meat contaminating

other foodstus.

Storage

The fridge is for short term food storage. Although low temperatures

can be maintained, extended periods of food storage is not

recommended.

As the cold air circulates within the fridge, the temperature can vary

between the dierent sections. As such, foods should be stored in

dierent sections according to type. Sections 6 and 7 are the coldest

parts of the fridge.

1. Butter, cheeses etc.

2. Food in jars and bottles

3. Drinks, e.g. milk

4. Cooked food

5. Yogurts, preserves etc.

6. 75cl bottles or ready meals etc.

7. Fresh meat and ﬁsh

8. Fruit and vegetables

The fridge shelves can be moved

according to the storage requirements

within the fridge section. To move the

shelf, lift up the rear section and then

pull it outwards. To replace, slide the

shelf back into the slot, and then lower

the rear section.

The wine racks can be deployed or

withdrawn as desired.

Fig. 1

Fig. 2

FW822

Control panel

A. Refrigerator temperature adjustment sensor

This button is used to adjust the temperature within the fridge. Press

this sensor once to activate adjustment, and then as many times as

necessary until the desired level is selected. The settings range from 1

to 6 with 1 being the warmest and 6 being the coldest.

Please note: Where possible, avoid having the temperature setting on

6 all of the time. This well help to alleviate strain on the compressor

and refrigeration system.

B. Refrigerator temperature setting display

This display will illuminate the current temperature setting. Adjusting

the temperature will cycle through this display.

Please note: You do not use numbers 1 to 6 to change the

temperature. Instead, use the refrigerator temperature adjustment

sensor (A).

C. Power button

Use this sensor to switch the appliance on and o (standby mode).

The sensor will be illuminated when the appliance is o.

Fig. 3

A B C

Care and cleaning

Always disconnect the appliance from

the power supply before any cleaning

or maintenance.

The fridge and crisper sections

should be cleaned using a solution

of bicarbonate of soda and lukewarm

water. Do not use abrasive products or

detergents. After washing, rinse and dry

thoroughly.

Clean the shelves, drawers and balconies

separately by hand with a mild solution of washing up liquid and

water. Do not put them in the dishwasher.

The water drain hole at the back of the fridge compartment should be

cleaned periodically to prevent the defrosted water from collecting

inside the fridge compartment. The drain plug can be used to clean

the drain hole.

If the appliance is not to be used for prolonged periods of time,

unplug and clean the appliance. The doors should be left slightly ajar

to prevent the formation of mildew and unpleasant odours.

Fig. 4

Drain hole

Drain Plug

Tabla de contenidos

Otros manuales de Refrigerador de CDA

Manuales populares de Refrigerador de otras marcas

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manual de usuario

Sharp

Sharp SJ-BA31IEXW2-EU Manual de usuario

CORBERO

CORBERO CC2300MCW Manual de usuario

KitchenAid

KitchenAid 2205264 Manual de usuario

Stengel

Stengel KU 1101 A++ Manual de usuario

NEFF

NEFF KI181 Series Manual de usuario

Hoshizaki

Hoshizaki Reach-In Manual de usuario

Amana

Amana ASD2524VES00 Manual de usuario

BOMANN

BOMANN KGC 213 Manual de usuario

Danby

Danby DAR044A1SLDD Instrucciones de montaje

Samsung

Samsung RF323TE Manual de usuario

Beko

Beko CSA31022 Manual de usuario

IKEA

IKEA FROSTIG C 185 E Manual de usuario

Electrolux

Electrolux ER 6821 D Manual de usuario

True

True TS-28 Manual de usuario

Frigidaire

Frigidaire FSC23R5DW9 Manual de usuario

Beko

Beko LSP4579W Manual de usuario