CDA SK651 Guía de inicio rápido
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu www.cda.eu
SK651 Single
Pyrolytic Oven
Installation, Use and Maintenance
2
Important
This appliance must only be used for the purpose for which it is
intended, i.e. domestic cooking, defrosting and reheating foods. Any
other use could be dangerous and may lead to premature failure of
the appliance.
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied with
this product following incorrect installation or misuse of the appliance.
User information:
•Ovens become hot during and immediately after use. Ensure you
do not touch the heating elements located inside the appliance.
•The oven door can become very hot during operation.
•After use, please ensure that the appliance is switched o.
•Keep children away from the appliance when in use, and
immediately after use.
•Keep the oven door closed when in use.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
3
CE Declarations of Conformity:
This oven has been designed, constructed and marketed in
compliance with safety requirements of EEC Directive 2006/95/EEC
(Low voltage) and requirements of EMC Directive 2004/108/EEC.
This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Electrical safety (LVD)
and Electromagnetic interference compatibility (EMC). Parts intended
to come into contact with food conform to EEC/89/109.4
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services. Disposing of a household appliance
separately avoids possible negative consequences for the
environment and health. It also enables the constituent materials to
be recovered, saving both energy and resources.
As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.
4
Important
• Do not dismantle any parts without disconnecting the oven from the
mains power supply.
• Do not use the appliance if any part is broken (for example a glass).
Disconnect it from the mains and call CDA Customer Care.
• Before using the oven, it is recommended to run it empty at the
maximum temperature for an hour to remove any smells remaining
from manufacturing processes.
• In all models, leave the door closed when the grill is used.
• The cooling fan may continue to run as long as the oven is hot, even
after it has been switched o.
• During use the appliance becomes very hot; don’t touch the heating
elements inside the oven.
• During the oven operation, the front is heated as well; consequently
keep children clear of the oven, especially during self-cleaning.
• Parents and adults should pay particular attention when using the
product in presence of children.
• Children should be overseen so as to ensure that they don’t play
with the equipment.
• Keep children under age 8 away, unless constantly supervised.
• This appliance is not intended for use by persons (including children
over age 8) with reduced physical sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children may not perform cleaning and maintenance unsupervised.
5
• In order to avoid damage to the oven enamel coat, do not cover the
oven base with any item (e.g. aluminium foil, pans and the likes).
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface, which may
result in shattering of the glass.
• Abrasive detergents and steam cleaning equipment should not be
used for cleaning.
• Before performing self-cleaning, take out all accessories (grills,
dishes, pans) to avoid damaging them, remove large cooking
residues and then close the door, ensuring that it is closed properly.
• Ensure the oven is cool and power to the oven has been turned o
before removing the door. Failure to do so could result in electrical
shock or burns.
• Read the user instructions carefully before using the oven for the
first time.
• Follow the instructions for first use of the oven.
• Clean the oven regularly.
• Remove spills as soon as they occur.
• Always use oven gloves when removing shelves and trays from the
oven.
• Do not grill food containing fat without using the grill pan grid.
• Do not cover the grill pan grid or the oven walls with aluminium foil.
• Do not use the oven tray for roasting.
• Do not perform maintenance or cleaning of the oven without first
switching o the electricity supply. If the oven has recently been
used, allow to cool.
6
• Do not place hot enamel parts in water. Leave them to cool first.
• Do not allow vinegar, coee, milk, saltwater, lemon or tomato juice to
remain in contact with enamel parts.
• The oven can require increased ventilation on pyrolytic programmes.
This can be achieved either from an open window or the use of a
fan.
Fig. 1 below shows correct placement of grills.
Fig. 1
7
Fig. 2
Fitting Out Your Appliance
Oven rack positions
The oven racks can be positioned in any one of four pairs of guides at
diering levels. At each level is a pair of supports formed in the side
walls of the oven cavity.
• Always be sure to position the oven racks before turning on the
oven.
• Make sure that the racks are level once they are in position.
• The racks are designed to stop when pulled forward to their limit.
To remove a rack from the oven
1 Pull rack forward.
2 Lift rack up at front and then pull
further forward to remove it.
To replace an oven rack
1 Place rear of rack between rack level
guides.
2 While lifting front of rack, slide rack in
all the way while lowering the front. Fig. 3
8
The Control Panel
Fig. 3
Fig. 4
Temperature control Digital Display Function control
Door lock LED
Time LED
Heating LED
Timer indicator
Temperature LED
Auto timing indicatorAuto cooking indicator
Digital Display in Detail
9
Fig. 5
Function Control Knob in Detail
Defrost
Conventional
oven
Fan with
lower heat
Light
Fan oven
Fanned half
grill
O
Conventional
Eco oven
Half grill
Full grill
Pyrolytic
clean
10
Before First Use
When the oven is connected to the electrical supply the latch
mechanism runs an automatic self-test by locking then unlocking the
oven door. This operation takes about half a minute. The “Door lock
LED” flashes while this test is performed, then turns o when the test
is completed.
The same process is repeated after every interruption to the power
supply.
Clock
The clock must be set after connecting the electrical supply, before
any cooking functions can be used.
The time of day is always displayed in 24 hour format.
Note: The “Time LED” is lit whenever the digital display is showing a
time value.
Setting the clock
In order to set the time of day, the “Function control” knob must first
be in the “O” position.
• Turn the “Temperature control” knob clockwise or anticlockwise and
let it return to its rest position: The hours flash.
• Modify the flashing hours value by turning the “Temperature control”
knob clockwise or anticlockwise, then let it return.
• Push the “Temperature control” knob to set the minutes: The
minutes flash.
• Modify the flashing minutes value by turning the “Temperature
control” knob clockwise or anticlockwise, then let it return.
• After a few seconds the whole time display flashes. Once this
flashing finishes the time is set.
Tabla de contenidos
Otros manuales de Horno de CDA
CDA
CDA SK420 Instrucciones de instalación y funcionamiento
CDA
CDA SL570BL Guía del usuario
CDA
CDA SK451 Manual de usuario
CDA
CDA RV 1000 Series Manual de usuario
CDA
CDA SL400SS Guía del usuario
CDA
CDA 9Q6 Series Manual de referencia
CDA
CDA 9Q6 Series Manual de referencia
CDA
CDA SV500 for Manual de referencia
CDA
CDA CD 307 Instrucciones de operación
CDA
CDA sg120 Series Manual de referencia
CDA
CDA 11Z6 for Manual de referencia
CDA
CDA dk750 Series Guía de seguridad
CDA
CDA SC309 Series Manual de referencia
CDA
CDA VM452 Hoja de especificaciones
CDA
CDA SL200SS Guía del usuario
CDA
CDA RV 700 Series Manual de usuario
CDA
CDA sk650 Manual de referencia
CDA
CDA SK210 Hoja de especificaciones
CDA
CDA SVA 150 Series Manual de referencia
CDA
CDA SK110 Guía de inicio rápido
