Castles Automation EZ100 PC Series Manual de usuario
EZ100 PC/SC Series
Smart Card Reader
User’s Manual
V1.3
Version: 1.3
Date: December 04, 2000
Castles Automation Co., LTD.
Tel: 886 (2) 2648-5929
Fax: 886 (2) 2648-5928
E-Mail: [email protected]
Web: www.casauto.com.tw
© Castles Automation Co., LTD. 1999-2000
All rights reserved
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 2/ 42
Table Of Contents
WARNING....................................................................................................................4
ABOUT THIS MANUAL............................................................................................4
1. INTRODUCTION............................................................................................5
2. FEATURES.......................................................................................................6
3. HARDWARE INSTALLATION.....................................................................7
A. CABLE CONNECTION...........................................................................................7
K-TYPE..................................................................................................................7
R-TYPE..................................................................................................................8
B. PIN ASSIGNMENT ................................................................................................9
4. IC CARD INTERFACE ................................................................................10
A. IC CARD POWER SUPPLY VCC .........................................................................10
B. PROGRAMMING VOLTAGE VPP .........................................................................10
C. CARD ACCEPTOR ..............................................................................................10
D. CARD INSERTION DETECTION............................................................................10
E. LED INDICATOR................................................................................................11
F. CARD TEARING PROTECTION ............................................................................11
G. SHORT CIRCUIT PROTECTION............................................................................11
5. SUPPORTED CARD TYPES .......................................................................12
A. SMART CARDS(ASYNCHRONOUS INTERFACE)...................................................13
6. INTERFACE ..................................................................................................14
R-TYPE....................................................................................................................14
Communication Parameters...............................................................................14
K-TYPE ...................................................................................................................14
7. SOFTWARE INSTALLTION .......................................................................15
A. EZ100PR PC/SC DRIVER INSTALLATION STEP-BY-STEP.....................................16
Windows 95/98: ...................................................................................................16
Windows NT4.0:..................................................................................................21
Windows 2000: ....................................................................................................22
B. EZ100PK PC/SC DRIVER INSTALLATION STEP-BY-STEP.....................................27
Windows 95/98: ...................................................................................................27
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 3/ 42
Windows NT4.0:..................................................................................................27
Windows 2000: ....................................................................................................30
Part 1:..............................................................................................................30
Part 2:..............................................................................................................36
APPENDIX A:............................................................................................................42
TECHNICAL SPECIFICATIONS...................................................................42
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 4/ 42
WARNING
Information in this document is subject to change without prior notice.
No part of this publication may be reproduced, transmitted, stored in a retrieval
system, nor translated into any human or computer language, in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise,
without the prior written permission of Castles Automation Co., LTD.
All trademarks mentioned are proprietary of their respective owners.
ABOUT THIS MANUAL
This manual describes the features, specification and installation of PC/SC driver for
EZ100PK/PR PC/SC IC card reader.
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 5/ 42
1. Introduction
The EZ100PK/PR PC/SC IC card reader/writer is an interface for the
communication between a personal computer and an IC card.
EZ100PK/PR PC/SC provides a uniform and simple interface to the computer,
Through the interface, it becomes much easier for an application software
programmer to process different types of IC cards.
Users who are using the EZ100PK/PR PC/SC don’t need to know the detail of the
communication protocol and physical layer of cards. However, They do need to know
the command set of a specific smart card or the memory organization of a memory
card in order to write their particular application software.
The EZ100PR PC/SC reader is connected to the COM port of the computer
through its RS232 interface for the data communication. And it also has a cable to be
connected to the keyboard port of the computer to get its power. Whereas, the
EZ100PK PC/SC reader has only one cable connected to the keyboard port for both
data communication and power.
The PC/SC Workgroup, a joint effort of Bull CP8, Gemplus, Hewlett-Packard,
IBM Corporation, Microsoft, Schlumberger, Siemens Nixdorf, Sun Microsystems,
Toshiba and VeriFone was initiated to develop a specification that can facilitate the
interoperability necessary to allow Integrated Circuit Card (ICC) technology to be
effectively utilized in the PC environment. In addition to development of the
specification, the PC/SC Workgroup members are committed to implementation of
both hardware devices and PC system components necessary to validate the design
efforts. This is deemed a critical step in the process of moving toward accepted
standards and will provide a base of experience from which to further refine and/or
enhance this specification. For more information, please reference the PC/SC
Workgroup web site : http://www.pcscworkgroup.com/.
Note: All the EZ series IC card readers can do both read and write functions to IC
cards. However, the term “card reader” or “reader” is usually and commonly in use
for this kind of devices.
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 6/ 42
2. Features
nISO7816-1/2/3 compatible IC card interface
nSupport most common used memory-based IC cards
nSupport T=0 or T =1 CPU-based smart cards
nAutomatic detection for memory card or smart card
nIC card interface short circuit protection
nPush-Pull type IC card acceptor, insertion cycle >= 200,000.
nLED indicator indicates reader’s status.
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 7/ 42
3. Hardware Installation
A.Cable Connection
K-TYPE
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 8/ 42
R-TYPE
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 9/ 42
B.Pin Assignment
EZ100 PC/SC User’s Manual V1.3
1999~ Castles Automation Co., Ltd.. All rights reserved. 10 / 42
4. IC Card Interface
A.IC Card Power Supply VCC
The EZ100PK/PR PC/SC reader supplies power to cards. The maximum
current consumption of an IC card should not exceed 50mA.
B.Programming Voltage VPP
Since all common IC cards currently being used in the market have an
internal charge pump to supply the Vpp from the Vcc for writing/erasing internal
EEPROM. The Vpp is not needed any more. Therefore, The EZ100PK/PR PC/SC
reader connects this pin to Vcc always to avoid floating.
C.Card Acceptor
The EZ100PK/PR PC/SC reader provides a push-pull type of card acceptor. It
has guaranteed 200,000 insertion cycles.
D.Card Insertion Detection
There is a card detecting switch in the IC card acceptor to detect the card is
present or absent.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
