Cassida TillTally Manual de usuario
Moving money forward
®
CASSIDA TillTally + TillTally Elite Money Counting Scales
H
Table of contents:
1. INTRODUCTION
1.1 About the Cassida TillTally ______________________________________________ 2
1.2 Box contents __________________________________________________________ 2
1.3 Front and rear views ___________________________________________________ 3
1.4 Display and Controls ___________________________________________________ 4
2. CALIBRATION
2.1 Calibratingfortherstuse ______________________________________________ 6
2.2 Recalibrating the scale_________________________________________________ 6
3. OPERATION
3.1 Counting coins in cups from your till _____________________________________ 8
3.2 Counting coin rolls _____________________________________________________ 9
3.3 Counting paper currency _____________________________________________10
3.4 Displaying results of your count ________________________________________11
3.5 Printing a record of your counting _____________________________________11
3.6 Deleting the complete counting process_______________________________11
3.7 Deleting a single counting result _______________________________________11
3.8 Using the FLOAT feature _______________________________________________12
3.9 Activating the FLOAT Function _________________________________________12
4. SPECIAL FUNCTIONS
4.1 FREE weighing ________________________________________________________13
4.2 REFERENCE Weighing _________________________________________________13
5. CHANGING THE SETUP MENU
5.1 Float _________________________________________________________________14
5.2 Packages ____________________________________________________________15
5.3 Order ________________________________________________________________16
5.4 Set Cup Weight _______________________________________________________16
5.5 Reference____________________________________________________________17
5.6 Calibrate _____________________________________________________________17
5.7 Auto Continuation ____________________________________________________17
5.8 Auto Add ____________________________________________________________18
Cassida TillTally Money Counting Scale 1
Table of contents:
5.9 Auto Save ____________________________________________________________18
5.10 Currency _____________________________________________________________18
5.11 Factory Settings_______________________________________________________19
5.12 Eco Mode ____________________________________________________________19
5.13 Contrast______________________________________________________________19
5.14 Coin Roll _____________________________________________________________20
6. TROUBLESHOOTING, SPECIFICATIONS
6.1 Troubleshooting_______________________________________________________21
6.2 Specications_________________________________________________________22
7. WARRANTY, SHIPPING, CONTACT INFORMATION
7.1 Warranty _____________________________________________________________23
7.2 Shipping______________________________________________________________23
7.3 Contact information __________________________________________________23
Moving money forward
®
2
This manual contains important information on safety
measures and operational features. Please read it
carefully before operating your scale and keep it for
future reference.
1.1 About the Cassida TillTally
Thank you for choosing the Cassida TillTally. We hope you enjoy using it.
The Cassida TillTally is designed to speed the process of counting a register till or
cash drawer. It easily counts both coinage and paper currency, allowing you to
count and calculate the value of a register till in approximately one minute.
1.2 Box contents
• Cassida TillTally Money Scale
• AC power cord
• User manual
• 500g reference weight for calibrating the money scale
• Coin cup for weighing coins
• Cup support tray (also called a hod) for holding the coin cup and for
counting paper currency
INTRODUCTION
1.
Cassida TillTally Money Counting Scale 3
1.3 Front and rear views
1 Power Input
2 Printer Port
3 Battery compartment
4 Coin cup for weighing coins
5 Keypad
6 Display
7 Cup support tray (hod) for coin cup and counting currency
NOTE: TillTally has a smaller support tray (hod)
Rear/Bottom View
1 2
3
7
45
6
Moving money forward
®
4
SETUP
CLEAR INFO
OK
<
<+
Float On/Off
Quantity
Amount / Sum
Unit / Reference Auto Add
+1,2,3...
Auto Count
Float
i
1
a b c d e
2 3 4
5
6
7
8
9
10 11
0000000.00
0000
000
000000.00
00000000.00
1.4 Display and Controls
Cassida TillTally Money Counting Scale 5
Display
1. LC display
2. Pictogram for coins, coin rolls and paper currency
3. Pictogram + (addition to total amount) and 1, 2, 3 (reference weighing)
4. Pictogram information overview
5. Pictogram g for weight (free weighing)
6. Active and inactive functions
7. Battery status
8. Sum of all items currently being counted
9. Quantity of all items currently being counted
10. Total sum of all items being counted
11. Currency
Controls
a. Switches the money scale on/off; quits the SETUP menu; resets all or single
counting results to zero
b. Selects the coin, coin roll and currency denomination to weigh, selects
the menu item; switches the scale functions on/off; start the SETUP menu in
combination with d.
c. Addsthecurrenttotaltothetotalamount;conrmsamenuinput;printa
receipt with connected printer.
d. Selects the coin, coin roll and banknote denomination to weigh; selects
the menu item switches the scale functions on/off; start of the SETUP menu
in combination with b.
e. Changes from information display to counting display; activates the
special functions Free Weighing, Reference Weighing, and Float.
Moving money forward
®
CALIBRATION
2.
The money scale must be calibrated:
1. Onrstusage
2. When it is reset to factory settings
3. After any change in the location where counting is carried out
4. If the scale should fall to the ground or receives a hard hit on its hod.
2.1 Calibratingfortherstuse
Once the TillTally is plugged in and turned on, the text CALIBRATE SCALE appears
on the display. Insert the cup support into the scale and begin the calibration
procedure by pressing the OK button. The message ZERO appears on the display
to indicate that nothing has to be on the scale.
The screen will prompt you to add the included 500 g reference weight. Place
the weight on the cup support and then press OK. As soon as the procedure
has been completed, SCALE READY will appear on the display, followed by an
audible beep. The scale turns off automatically. Remove the 500 g reference
weight and turn the scale on by pressing the CLEAR button. The money scale is
now calibrated for the current location and counting can begin.
NOTE: If the scale was quality tested at Cassida prior to shipping, you will not
needtocalibrateduringyourrstusage.
2.2 Recalibrating the scale
In the SETUP menu, choose the option FCTRY SET. Press the OK button for
approximately 3 seconds to change to calibration mode. The procedure is
nishedwhenthree audiblebeepsareemittedfromthescale. Afterresetting
the device to factory settings, the scale will need to be recalibrated. Follow the
CALIBRATE procedure above.
6
Cassida TillTally Money Counting Scale
OPERATION
3.
Follow these steps to use the Cassida TillTally Correctly:
1. PlacetheTillTallyonatsurface
2. BecertaintheTillTallyiscalibratedbeforeitsrstuse(followdirectionsabove)
3. Use the included power cord and/or 6 AAA batteries
4. Remove all items from the cup support hod before use.
Turn ON the TillTally by pressing the CLEAR button. The standard counting mode
is activated. The counting procedure always starts with the lowest denomination
of the selected currency. This is signaled with the coin symbol on the display. The
value of the money denomination being weighed appears in the Unit/Reference
eld.Becertaintoplaceonlythecoinorbilldenominationthatappearsonthe
display.
TurnOFFtheTillTallybypressingtheCLEARbutton.NOTE:allconrmedsettingswill
be saved after turning the device off.
Counting coins using the coin cup
Use the provided cup to weigh coins.
1. Fill the weighing cup with the coin denomination shown on the display.
2. Place the coin cup on the TillTally money scale.
3. The weight and value will register. You’ll hear an audible tone and the result
will be shown on screen.
4. After removing the counted coins from the scale, the sum is automatically
added to the total amount.
5. The scale automatically continues on to the next higher denomination unless
Auto Continue function is inactive. If auto continue is inactive, select the next
higher or lower denomination by using the < or > button.
NOTE: The TillTally does not count 50 cent pieces or $1 coins.
7
Moving money forward
®
3.1 Counting coins in cups from your till
The TillTally includes a coin cup. Place the empty cup onto
the scale’s cup support tray. Assure the coin symbol is shown
on screen. Next, place loose coins of a single denomination
directly into the cup. The denomination placed into the cup
should match the shown on screen. Change the denomination
by pushing the , or > button.
Once the TillTally registers the count and value of the denomination, remove the
cup from the hod and empty it.
Return the cup to the scale and place the next denomination into the cup. Do
the same for all coins.
If you have forgotten coinage and need to add to a denomination, simply
choose the denomination by pushing the < or> button.
Ifyourtillorregisterhasremovablecups,youcanplacethelledcupsdirectly
on the scale. A prior calibration of the cups is required before using your own
cups.Seesection5.4.Placethelledcupsdirectlyonthecupsupport.
NOTE: The TillTally can calibrate and store the weight for a single cup. The TillTally
Elite has the ability to calibrate and store the weight for up to 8 different cups.
NOTE: Do not overll the cups. The TillTally can weigh up to 1kg before
overweighing.
8
SETUP
CLEAR INFO
OK
<
<+
Float On/Off
Quantity
Amount / Sum
Unit / Reference Auto Add
+1,2,3...
Auto Count
Float
i
1
a b c d e
2 3 4
5
6
7
8
9
10 11
0000000.00
0000
000
000000.00
00000000.00
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Contador de efectivo de Cassida
Cassida
Cassida C-880 Manual de usuario
Cassida
Cassida C300 Manual
Cassida
Cassida C 200 Manual de usuario
Cassida
Cassida Cube Manual de usuario
Cassida
Cassida 5510 Manual de usuario
Cassida
Cassida 6600 Manual de usuario
Cassida
Cassida 5520 UV Manual de usuario
Cassida
Cassida MSD-1000 Series Manual de usuario
Cassida
Cassida InstaCheck II Manual de usuario
Cassida
Cassida Cube Manual de usuario
