Casio PV-S250 Manual de usuario
79
Chapter
7Quick-Memo
1Draw toolbar
2Input toolbar
3Quick-Memo category
button
Quick-Memo is like having a digital memo pad on which you can sketch simple
line drawings or jot down reminders.
Entering the Quick-Memo Mode
Tap the Quick-Memo icon below the PV Unit screen to enter the Quick-Memo
Mode.
1
2
3
• This is the Quick-Memo input screen, which appears first whenever you
enter the Quick-Memo Mode.
• Tap in the upper right corner of the screen to exit the Quick-Memo
Mode and return to the screen from which you originally entered it.
Quick-Memo Categories
There are three Quick-Memo categories.As with categories in other modes, Quick-
Memo categories let you group your memos for easier management.
To select a Quick-Memo category
Tap the Quick-Memo category button to cycle through the Quick-Memo
categories in the following sequence: fififi,
etc.
The display shows the Quick-Memos that are stored under the currently
selected category.
7
80
Using the Quick-Memo Drawing Tools
The following describes the functions of the Quick-Memo Drawing tools when
inputting Quick-Memo data.
Tap a drawing tool with the stylus to select it. The currently selected drawing tool
is highlighted on the toolbar. Tapping some of the drawing tools also cycles through
a number of optional settings.
12 34 5
6
Important!
A diagonal line may appear jagged on the display, even in the Quick-Memo list
(page 82).
Pencil Tool
• Tap this tool to cycle through line thickness in the sequence:
medium fithick fithin fimedium , etc.
• Dragging the stylus on the screen while this tool is selected draws a line.
• Note that you can control the type of line produced by the pencil tool
with the line tool, described below.
Eraser Tool
• Tap this tool to cycle through eraser thickness in the sequence:
medium fithick fithin fimedium , etc.
• Dragging the stylus on the screen while this tool is selected erases
anything along the line.
• Note that you can control the type of path produced by the eraser tool
with the line tool, described below.
1Pencil
2Eraser
3Line
4Color
5Undo
6Selected tool
81
Chapter 7 Quick-Memo
Line Tool
• Tap this tool to cycle through the type of line or eraser path produced
when dragging the stylus on the display while the line tool or eraser tool
is selected. Each tap of this tool cycles through the line type in the
sequence: freehand fistraight fivertical/horizontal
firectangle fifreehand , etc.
Color Tool
• Tap this tool to toggle the darkness of the line between the following
settings: black «gray .
Undo Tool
• Tap this tool to undo the last draw operation you just performed.
Creating a New Quick-Memo
Use the procedures in this section to draw the figures you want in a Quick-Memo.
To input a new Quick-Memo
1. Enter the Quick-Memo Mode.
2. Tap the (category) button to select the category where you want to
save the Quick-Memo.
3. Use the drawing tools to draw the figure you want.
• To clear all Quick-Memo screen contents, tap Clr.
4. After you are finished, tap Save to save the Quick-Memo.
• If you want to input another Quick-Memo, tap New.
To draw a line or rectangle
1. Select the line tool for the type of figure (freehand, straight line, vertical/
horizontal line, rectangle) you want to draw.
82
2. Drag the stylus on the display to draw the figure.
Recalling a Quick-Memo
Use the following procedure to scroll through a list of Quick-Memos and find the
one you want. Then you can select a Quick-Memo in the list to view it.
1. While the Quick-Memo input screen is on the display, tap List.
1
3
4
2
• This is the Quick-Memo list screen.
2. Tap the category button to specify the category whose Quick-Memos
you want to view. Selecting displays the Quick-Memos in all
categories.
3. Use the scroll buttons to scroll through the Quick-Memos in the currently
selected category.
4. When the Quick-Memo you want to recall is on the screen, tap it with
the stylus to select it.
1Category button
2Scroll buttons
3Selected Quick-Memo
4Creation date
83
Chapter 7 Quick-Memo
5. Tap the selected Quick-Memo to change to its data display.
1
23
6. In the Quick-Memo data display, you can use the scroll buttons to scroll
back and forward to the data display of other memos.
7. After viewing the Quick-Memo, tap List to return to the list screen.
Screen Copy
The screen copy feature lets you copy an image of certain screens and store it as
a Quick-Memo screen. The following is a list of screens that you can copy with
the screen copy feature.
Data that can be screen copied
All list and data screens
All calendar screens (1, 2, 3-month)
Weekly Scheduler
Daily Scheduler
To Do List
Reminder List
All data screens
Screens listing periodic totals by expense
types or payment types (page 69)
All list and data screens
All list and data screens
Conversion calculation screens
Mode
Contacts
Scheduler
Expense Manager
Memo
Currency Converter
1Scroll buttons
2Category of displayed
Quick-Memo
3Creation date
84
To record a screen copy
1. Display the data for which you want to record a screen copy.
2. Tap the Menu Bar icon to display the menu bar, and then tap Option –
Screen copy.
• The PV Unit switches to the Quick-Memo Mode, with the new screen
copy on the display. Make any additions or changes if you want, and
then store the image by tapping Save.
85
Pocket Sheet gives you access to basic spreadsheet capabilities while on the go.
You can build your own spreadsheets from scratch, and even synchronize with
Microsoft®Excel data on your computer.
Entering the Pocket Sheet Mode
1. Tap the Menu icon to display the Mode Menu, and then tap Pocket
Sheet.
2
1
• This is the Pocket Sheet list screen, which appears first when you enter
the Pocket Sheet Mode.
Pocket Sheet Basics
With Pocket Sheet, you can open up a blank sheet and build the sheet you want
from scratch.
The following sections describe how to open a new sheet, and how to perform
some of the most basic sheet operations.
Chapter
8Pocket Sheet
8
1Sheet titles
2Scroll bar
86
Creating a New Sheet from Scratch
1. Display the Pocket Sheet list screen.
2. Tap the New button.
1
2
6
5
34
• Columns are named using the letters of the alphabet from A to Z, while
rows are numbered sequentially from 1 to 999.
• The maximum capacity for a single sheet is about 32KB (about 1,900
cells when each cell contains one character, without any format settings
or borderlines). The message “Sheet is too big!” appears on the display
whenever the contents of a file exceeds this limit.
If a sheet being received by the unit during a Pocket Sheet Sync operation
exceeds the maximum limit (about 32KB), the excess cell data is
automatically cut off. In this case, the sync operation ends normally,
with no indication that the data was cut off. This means you should
always check sheet contents visually after a sync operation is complete.
• A cell is referred to using its cell reference, which is made up of the
cell’s column name and row number. This means that the cell reference
of the upper left cell in the above sheet is A1, and the cell reference of
the lower right cell is D5.
• The active cell is the one that is currently selected for input. The active
cell is highlighted.
• The numeric keyboard appears first whenever you open a new sheet.
1Row numbers
2Keyboard
3Input field
4Current cell
5Column names
6Cells
87
Chapter 8 Pocket Sheet
Making a Cell the Active Cell
You can make a cell active by tapping it with the stylus so it becomes
highlighted. You can also move the highlighting around the display using
the scroll bar as described below.
• Tapping the gray areas of the scroll bar scrolls the entire screen with the
highlighted active cursor in the same relative position in the newly
displayed screen.
Selecting a Range of Cells
While a sheet is open on the display, drag the stylus across the range of cells
you want to select. The cells become highlighted as you drag across them.
• Dragging straight left or right selects a range of cells in the same row.
• Dragging straight up or down selects a range of cells in the same column.
• Dragging diagonally selects a block of cells (multiple rows and columns).
Jumping to a Specific Cell in a Sheet
Important!
• You cannot jump to a cell located inside a row or column that is frozen. To
jump to such a cell, you must unfreeze the row or column first.
To do this:
Move the highlighting one cell left
Move the highlighting one cell right
Move the highlighting one cell up
Move the highlighting one cell down
Tap here on the Scroll
Bar:
H
J
K
L
88
1. While a sheet is on the display, tap the Menu Bar icon to display the
menu bar, and then tap Edit – Go To to display the Go To screen.
2. Use the on-screen keyboard to type in the cell reference (column and
row) of the cell to which you want to jump.
• To jump to cell Z999, for example, type “Z999”.
3. Tap Exe to jump to the cell you specified.
Inputting Data Into a Cell
This section explains the rules and procedures for inputting text, values, and
mathematical expressions into sheet cells. It also contains detailed information
on the various cell functions that are available.
General Input Rules
The following are the general rules that you should observe whenever
inputting data.
• Anything you enter on the keyboard is input into the sheet’s active cell.
• You can input up to 256 characters into each cell.
• Mixing text and numbers inside the same cell causes everything in the
cell to be treated as text.
• Do not manually input commas as separators inside values. Doing so
interferes with correct display of calculation results. Use the procedure
under “Changing the Format Settings of a Cell” on page 95 to turn on
automatic comma separators.
Otros manuales para PV-S250
16
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de PDA de Casio
Casio
Casio PV-100 Manual de usuario
Casio
Casio PV-S250 Manual de usuario
Casio
Casio DX-500HG Guía de solución de problemas
Casio
Casio PV-S250 Manual de usuario
Casio
Casio IT-G400 Series Manual de usuario
Casio
Casio PV-750 Plus Manual de instrucciones y seguridad
Casio
Casio Palm-size PC Manual de usuario
Casio
Casio PV-750 Plus Manual de instrucciones y seguridad
Casio
Casio PV-250X Manual de usuario
Casio
Casio PV-250X Manual de usuario
Casio
Casio PV-250X Documento técnico
Casio
Casio PV-250X Manual de usuario
Casio
Casio PV-100 Manual de usuario
Casio
Casio CASSIOPEIA PA-2400W Instrucciones de montaje
Casio
Casio IT-10 - Cassiopeia M20 - Win Mobile Manual de usuario
Casio
Casio PV-750 Plus Manual de usuario
Casio
Casio PV-100 Manual de usuario
Casio
Casio PV-750 Plus Manual de usuario
Casio
Casio PV-100 Manual de usuario
Casio
Casio FP-200 Manual de usuario
