Casio Exilim EX-FH100 Manual de usuario

CAS|O

Digital Camera

EX-FH1OO

User's Guide

Thank you for purchasing this CASIO product.

• Before using it, be sure to read the precautions contained in this User's Guide.

• Keep the User's Guide in a safe place for future reference.

• For the most up-to-date information about this product, visit the official EXlLIM

Website at http:!/www.exilim.com/

,_ iJl

See page 28 for the procedure for viewing snapshots.

1. Press [1"_-I] (PLAY) and then use [,] and [_.] to display the movie you

want to view.

2. Press [SET] to start playback. Movie icon: []

Recording time

Image quality

Movie Playback Controls

[4] [1_] (Playback in progress.)

• Each press of either button increases the speed of the

fast forward or fast reverse operation.

• To return to normal playback speed, press [V].

[SET]

[4] [1_] (Playback paused.)

• Holding down either button scrolls continuously.

Press [V] and then press [A] [V]

• Volume can be adjusted only while movie playback is in

progress.

[A] (DISP)

Slide the zoom controller in the direction of I-,_-](o,.).

• You can use [A], [V], [4], and [1_] to scroll the zoomed

image on the monitor screen. You can zoom a movie

image up to 4.5 times normal size.

[MENU]

• Playback may not be possible for movies not recorded with this camera.

108 Viewing Snapshots and Movies

iiiiiii{i

Each time you perform a continuous shutter (CS) operation, the camera creates a CS

group that includes all of the images for that particular CS session. You can use the

following procedure to play back the images in a particular CS group.

/. Press [1"_-I] (PLAY) and then use [,] and [_.] to display the CS group

whose images you want to view.

Number of ima( CS group icon

the CS group

image in the CS group

2. About one second after you select a CS group, high speed playback of

its images will start automatically.

• After playback of a CS Group is complete, the first image of the group will be

displayed on the monitor screen.

• Pressing [SET] will pause playback. While playback is paused, you can adjust

the playback speed, specify the playback direction, scroll forward or back,

zoom images, and delete images.

CS speed

Current image number/number

of images in the group

Playback guide

109 Viewing Snapshots and Movies

The following are operations that are supported after you press [SET] to

start image playback.

/!llitiii/liiilii/!i! Ii/illl

///t!!l!!i1!t!I1tii

ii lli iiiiiiillii!!liliiiili!!!i

iii! i:!ii

During playback, changes the playback direction and playback speed.

While playback is paused, scrolls forward or back.

• Playback speed cannot be adjusted while the displayed image is

zoomed.

Toggles between pause and play.

Zooms the image.

• You can use [A], [V], [,], and [1_]to scroll the zoomed image on

the monitor screen.

• Sliding the zoom controller towards I-,_-](o_) while an image is not

zoomed will display a menu of images in the current CS group.

Exits CS group playback.

Cycles through information display formats.

i[_' i ! Displays the "CS Frame Edit" menu.

_NOTE

• Multiple images shot using normal-speed continuous shutter are stored individually

and are not grouped. This means they can be displayed individually (page 28) but

not as a CS group.

_Deleting Continuous Shutter Images

You can use the following procedures todelete imageswhile playback is in progress

or paused.

•Deleting a Specific CS Group File

1. While CS image playback is in progress or paused (toggle by pressing

[SET]), press [V].

This will display the "CS Frame Edit"menu.

2. Use[A] and [V] to select "Delete" and then press [SET].

110 Viewing Snapshots and Movies

3. Use[<] and [b'] to display the image you want to delete.

4. Use[A] and [V] to select "Delete" and then press [SET].

•To delete other files, repeat steps 3 and 4.

• To exit the delete operation, press [MENU].

•Deleting Multiple Files in a CS Group

1. While CS image playback is in progress or paused (toggle by pressing

[SET]), press [V].

This will display the "CS Frame Edit"menu.

2. Use[A] and [V] to select "Delete" and then press [SET].

3. Use [A] and [V] to select "Delete Frames" and then press [SET].

• This displays a file selection screen.

4. Use [A], [V], [<], and [1_] to move the selection boundary to the file

you want to delete, and then press [SET].

• This will select the check box of the currently selected file.

5. Repeat step 4 to select other files, if you want. After you are finished

selecting files, press [MENU].

6. Use[A] and [V] to select "Yes" and then press [SET].

• This deletes the files you selected.

• To cancel the delete operation, select "No" in step 6 and then press [SET].

111 Viewing Snapshots and Movies

• Deleting All Files in a CS Group

1. While CS image playback is in progress or paused (toggle by pressing

[SET]), press [V].

This will display the "CS Frame Edit" menu.

2. Use [A] and [V] to select "Delete" and then press [SET].

3. Use [A] and [V] to select "Del Group Images" and then press [SET].

4. Use [A] and [V] to select "Yes", and then press [SET].

_ Dividing Up a CS Group

Use the following to divide up a CS Group into individual images.

• Dividing Up aSpecific CS Group

1. While a CS group is displayed or while the images of a CS group are

scrolling on the monitor screen, press [MENU].

2. Use[,] and [_.] to select the "PLAY" tab.

3. Use [A] and [V] to select "Divide Group" and then press [,].

4. Use [,] and [_.] to display the CS group you want to divide up.

5. Use [A] and [V] to select "Divide" and then press [SET].

• To divide up other CS group files, repeat steps 4 and 5.

112 Viewing Snapshots and Movies

•Dividing Up All CS Groups

-_ iMPORTANT!

•Once a CS group is divided, it cannot be regrouped.

1. While aCS group is displayed or while the images of a CS group are

scrolling on the monitor screen, press [MENU].

2. Use[4] and [b'] to select the "PLAY" tab.

3. Use[A] and [V] to select "Divide Group" and then press [,].

4. Use [A] and [V] to select "Divide All Groups" and then press [SET].

5. Use [A] and [V] to select "Yes", and then press [SET].

WCopying a CS Group Image

Use the following procedure to copy an image in a CS group to a location outside of

the group.

1. While CS image playback is in progress or paused (toggle by pressing

[SET]), press [V].

This will display the "CS Frame Edit"menu.

2. Use[A] and [V] to select "Copy", and then press [SET].

3. Use [,] and [,] to display the image you want to copy.

4. Use [A] and [V] to select "Copy", and then press [SET].

_NOTE

• The functions below cannot be performed on snapshots inside a CS group. Before

using either of these functions, perform the above procedure to copy the image

first.

White Balance, Brightness, Trimming, Rotation, Resize

113 Viewing Snapshots and Movies

1. In the PLAY mode, use [,] and [_.] to scroll through the images until

the one you want is displayed.

2. Slide the zoom controller towards E¢'I (ck) to

zoom.

You can use [A], [V], [,], and [1_]to scroll the zoomed

image on the monitor screen. Slide the zoom controller

towards _ to unzoom the image.

- When monitor screen contents are turned on, a

graphic in the lower right corner of the screen

shows what part of the zoomed image is currently

displayed.

- To exit the zoom screen, press [MENU].

- Though the maximum image zoom factor is 8X,

certain image sizes may not allow zooming up to

the full 8X.

• Pressing [SET] will lock the current zoom factor for the on-screen image. You

can then use [,] and [1_]to scroll between images, using the same zoom

factor. Pressing [SET] again will unlock the zoom factor and allow you to use

[A], [V], [_] and [1_] to move around the currently displayed images. This

function cannot be used while viewing CS group images or movies. Also, CS

group images and movies will not appear when you are scrolling images with

[4] and [1_].

Zoom factor

Image area

Current display area

1. In the PLAY mode, slide the zoom controller Boundary

towards _(_).

Use [A], [V], [_] and [1_]to move the selection

boundary around the image menu.

To view a particular image, use [A], [V], [4], or [1_] to

move the selection boundary to the image you want and

then press [SET].

• In the case of a movie or a continuous shutter (CS)

file, the first frame of the file will be displayed.

114 Viewing Snapshots and Movies

1. Use the AV cable that comes with the camera to connect it to the TV.

White _ r

,J, I ,[ ,[ AV cable (bundled)

Yellow --4_ L--4_ _-- Red

___di;---] _ Terminal cover

USB/AV port

IN jack (red)

AUDIO IN jack (white)

VIDEO IN jack (yellow) Making sure that the I_ mark on the camera is

aligned with the _ mark of the AV cable connector,

connect the cable to the camera.

Make sure that you insert the cable connector into the USB/AV port until you

feel it click securely into place. Failure to insert the connector fully can result in

poor communication or malfunction.

Note that even while the connector is fully inserted, you _1--_ ,,_;;::_

still will be able to see the metal part of the connector as

shown in the illustration.

Make sure that the camera is turned off before plugging

in or unplugging the cable. Check the user

documentation that comes with the TV for information

about requirements before plugging into or unplugging

from the TV.

2. Turn on the TV and select its video input mode.

If the TV has more than one video input, select the one where the camera is

connected.

115 Viewing Snapshots and Movies

.Press [1"_-I](PLAY) to turn on the camera.

This will cause an image to appear on the TV screen, without anything appearing

on the camera's monitor screen.

• Pressing [ON/OFF] or [It's] (REC) will not turn on the camera while the AV

cable is connected.

• You also can change the aspect ratio of the screen and the video output

system (page 168).

4. Now you can display images and play back movies as you normally do.

• Output to a TV is not supported while the camera is in the REC mode.

• When the camera is connected to a TV for movie playback, only movie images are

displayed on the TV screen. The camera's monitor screen will show on-screen

information only (without any movie image).

• Before connecting to a TV to display images, be sure to configure the camera's

[It's] (REC) and [I-_--I](PLAY) buttons for "Power On" or "Power On/Off" (page 167).

• Audio is initially output by the camera at maximum volume. When you first start

displaying images, set the TV volume control at a relatively low level and then

adjust it as required.

_NOTE

• Audio is stereo.

• Some TVs may not be able to output images and/or audio correctly.

• All icons and indicators that appear on the monitor screen also appear on the TV

screen. You can use [A] (DISP) to change the display contents.

116 Viewing Snapshots and Movies

Otros manuales para Exilim EX-FH100

Tabla de contenidos

Otros manuales de Cámara digital de Casio

Casio

Casio EX-S7 - EXILIM Digital Camera Manual de usuario

Casio

Casio EXZ85BN Manual del propietario

Casio

Casio Exilim EX-ZR500 Manual de usuario

Casio

Casio Exilim EX-M20U Manual de usuario

Casio

Casio EX-Z21 - EXILIM Digital Camera Manual de usuario

Casio

Casio EXILIM EX-ZS150 Manual de usuario

Casio

Casio QV-10 Instrucciones de montaje

Casio

Casio EXILIM EX-Z27 Manual de usuario

Casio

Casio Exilim EX-H10 Manual de usuario

Casio

Casio EXILIM EXS3DBA Manual de usuario

Casio

Casio Exilim EX-FH25 Manual de usuario

Casio

Casio Exilim EX-S200 Manual de usuario

Casio

Casio Exilim EX-Z60 Guía de solución de problemas

Casio

Casio Exilim EX-V7 Manual de usuario

Casio

Casio EX-Z3 - 3 Manual de usuario

Casio

Casio QV-2400UX Manual de usuario

Casio

Casio Exilim EX-Z750 Manual de usuario

Casio

Casio Exilim EX-S600 Guía de solución de problemas

Casio

Casio EX-Z2200 - EXILIM Digital Camera Manual de usuario

Casio

Casio EX-G1 - Exilim 12.1 MP Endurance Digital... Manual de usuario

Casio

Casio Exilim EX-FH100 Manual de usuario

Casio

Casio EXILIM EX-ZR300 Manual de usuario

Casio

Casio QV-3EX Guía de solución de problemas

Casio

Casio EX-Z1080 - EXILIM Digital Camera Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario