Casella Orbi-Trace Manual de usuario
USER MANUAL
www.casellasolutions.com
Casella
Regent House,
Wolseley Road,
Kempston,
Bedford, UK
MK42 7JY
T: +44 (0)1234 844 100
E: info@casellasolutions.com
Social Distancing Tag
HB4100-01
February 2021
2
Table of Contents
Safety and warnings................................. 3
Disclaimer ................................................ 5
Introduction............................................. 6
System overview...................................... 7
Installation............................................... 9
Tag setup ............................................... 12
Infrastructure setup............................... 14
Infections Insight App ............................ 21
Technical specifications ......................... 26
Declarations........................................... 27
Support.................................................. 28
3
Safety and warnings
The Orbi-Trace does not present a safety risk when used as instructed
in this User Manual. However, it is possible that the environment
where you use the instrument may present a safety risk. For this
reason, always follow correct, safe working practices.
CAUTION
The Orbi-Trace units are designed to be robust,
however please use the tag as follows:
•Do not drop the tag or subject it to
mechanical shock.
•Avoid letting the tag come into contact with
water, solid materials or highly saturated or
corrosive gases as this may cause damage
and will invalidate the warranty.
•The Orbi-Trace contains no user serviceable
parts. If a fault is suspected, return the tag to
Casella or a Casella approved service centre.
CAUTION
If the equipment is likely to come into contact with
aggressive substances, take precautions to prevent
the instrument from being adversely affected, so
that the type of protection is not compromised.
(Aggressive substances such as solvents may affect
polymeric materials.) Suitable precautions include
regular checks as part of routine inspections and
4
establishing from the material’s data sheet that the
tag is resistant to specific chemicals.
CAUTION
Repair of this equipment shall only be carried out
by the manufacturer or an authorised
representative in accordance with the applicable
code of practice.
CAUTION
This product uses Bluetooth®, care must be taken
to avoid interference with sensitive equipment
such as in medical, aviation or safety critical
environments
5
Disclaimer
Do not use the Orbi-TraceTM system until you have thoroughly read
this manual or have been instructed by a Casella engineer.
At the time of writing, this manual was up to date but due to
continual improvements the final operating procedures may differ
slightly from those in the manual. If there are any questions, please
contact Casella for clarification.
Casella makes continual advancements in its products and services.
We therefore reserve the right to make changes and improvements
to any information contained within this manual.
Whilst every care is taken to ensure that the information in this
manual is correct, Casella will assume no responsibility for loss,
damage or injury caused by any errors in, or omissions from, the
information given.
6
Introduction
Thank you for purchasing the Orbi-TraceTM social distancing kit. This
user manual will provide all the information required to use the Orbi-
TraceTM tag, as well as setting up the infrastructure required for
contact tracing.
The Orbi-TraceTM tag will allow individual employees to be
immediately notified when safe distances are breached. With the
Anchor installed, the full capabilities of the Infection Insights App can
be used to analyse the connections, track risk of virus transmission
and ensure teams of people maintain safe distances. If measures in
your workplace aren’t being adhered to, it allows intervention and
adjustment to working practices.
7
System overview
The Orbi-TraceTM system consists of the following key components to
provide an easy to use social distancing and contact tracing solution.
•Orbi-TraceTM Ultra-wideband (UWB) Tags
•An Anchor
•Ethernet Gateway
•Power-over-Ethernet (POE) Injector
•Associated cables and mains supplies
Orbi-TraceTM Tags
The UWB tags are the heart of the
system. They provide a highly
accurate social distancing and
contact tracing solution. The tags
alert the user every time the safe
distance is breached. The tags also
keep a real-time based log of all
interactions and connections.
8
Anchor
The Anchors are the receiver of the UWB signals from
the Orbi-TraceTM tags. The anchors can be easily
mounted on the wall, ceiling or any other structure by
the help of provided brackets. When placing the tags
near the anchor at the end of a working day, the tags
download the contact information from the tags.
Note: The tag does NOT need to be in range of the anchor to measure
and store contact history.
Gateway
The Gateway connects to the Anchor and collects
the data from the Orbi-TraceTM tags and stores it
securely. The Gateway has an embedded firmware
and Casella’s software for contact tracing and
connection mapping. Connect the Gateway using
any (preferably CAT6e) Ethernet cable to your
company network to use the software.
POE Injector
The Power Over Ethernet (POE) Injector connects
the Gateway to the Anchor and provides power to
the Anchor over the Ethernet cable. The Injector
helps maintain a smooth network of power and
information. Connect the mains adaptor to a
mains supply and connect the Anchor and
Gateway accordingly using the Ethernet cables provided.
9
Installation
Anchor
The Anchor should be installed at the main
entrance/exit of your facility and near the
charging facility. At the end of a working day an
employee should return their Orbi-TraceTM tag to
be charged, with the charging location to be
within 15m line of sight of the anchor to enable
the data to be downloaded.
Use the mounting brackets provided and:
•Place the anchors high Placing the anchor
high (on the ceiling or on the walls) increases the chance of
receiving a good signal because there are less obstructions.
•Place anchors vertically, with the connectors at the top. This
keeps the inbuilt antenna at the bottom.
•If possible, materials like metal, water and wires should stay
away from the anchors, especially the inbuilt antenna
(bottom of the anchor).
•It is recommended to have a separation of 20 cm between
the anchor and walls. Extra mounting equipment can be used
to achieve this.
10
Wall Mount
Ceiling Mount
Pole Mount
Otros manuales para Orbi-Trace
1
Tabla de contenidos
Otros manuales de Producto de cuidado personal de Casella
Manuales populares de Producto de cuidado personal de otras marcas
HiB
HiB Spectre 50 Manual de usuario
Carex
Carex SunLite Manual de usuario
Roper Rhodes
Roper Rhodes Intense Manual de lista de piezas
Interacoustics
Interacoustics Titan IMP440 Instrucciones de funcionamiento y seguridad
ReTrak
ReTrak VS001 Manual de usuario
LED Technologies
LED Technologies dpl PAIN RELIEF Joint Wrap Manual de usuario
