Carad HUMIFIX SPACE OL12-009B Manual de usuario
1
INSTRUCTION MANUAL
HUMIFIX SPACE
Please keep this manual carefully for further reference!
Thank you for choosing our high-quality dehumidifier. Please be sure to read this
manual carefully before use. When meeting several questions, please contact the
professional service for help.
The dehumidifier will remove excess moisture from the air, creating comfortable
environment for your home and office. Its compact design allows you to move it
easily from room to room.
2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS...................................................1
SPECIFATION...............................................................................................2
INSTALLATION...........................................................................................3
APPLIANCE OVERVIEW............................................................................4
OPERATIONS...............................................................................................5
WATER DRAINAGE.....................................................................................7
CLEANING AND MAINTENANCE..........................................................9
DISPOSAL INFORMATION......................................................................10
TROUBLE SHOOTING GUIDE................................................................11
3
IMPORTANT SAFETY INSTRUCTIONS
Please read the operating instructions carefully before using your
dehumidifier for the first time.
1. Install the unit on flat and hard floor to diminish vibration or noise.
2. Never immerse the unit in water or other liquids.
3. Never operate the unit if the cable or other connector is damaged. Otherwise,
something abnormal may happen, please call customer service for help.
4. Disconnect the unit from power supply when it is not in use, or before relocating or
cleaning it.
5. Operate the unit only at the specified voltage.
6. The unit is for indoor use only. Don’t use it for other purpose.
7. Do not put heavy objects on the appliance.
8. Do not tip the unit to any side as spilled water could damage the appliance.
9. Never insert any other object into the unit body to avoid any hazard or unit failure.
10. Do not put the unit close to heat-generating devices or flammable and dangerous
materials.
11. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the
appliance.
12. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
13. The appliance must be positioned so that the plug is accessible.
14. The appliance shall be installed in accordance with national wiring regulations.
4
15. The ambient temperature range for the appliance is 5℃-35℃.
Don’t try to repair, dismantle or remold the appliance, or it may make some
damage. Even replacing the power cord should be done by special qualified
person.
SPECIFATION
Model No.
HUMIFIX SPACE OL12-009B
Dehumidification Capacity
12L/day
(30℃, 80% RH)
Supply Voltage
AC220-240V/50Hz
Rated Input Power
200W
Rated Input Current
1.2A
Water Tank Capacity
1.5L
Sound Pressure Level
≤42dB(A)
Refrigerant Charge
R134a/115g
Net Weight
10kg
Suction Side Pressure
0.5MPa
Discharge Side Pressure
1.5MPa
5
INSTALLATION
Install the unit one the flat floor and keep the room ventilated. Leave at least 20cm
spacing around the unit before connecting the hose.
1. Push the rubber adaptor of the water pipe on the drainage port of back panel. Please
refer the following picture.
2. Connect the water pipe to bathroom, outdoor or a container, such as a bucket.
NOTE:
1. Do not block the drainage port or water pipe.
2. Do not fold the water pipe or make it 1.5m higher than the bottom of unit.
3. Do not replace the rubber adaptor of the water pipe, it’s the special accessory for the
unit only, other adaptor may not fit the unit. If it’s damaged or lost, please call the
customer service for replacement.
6
APPLIANCE OVERVIEW
Front
Back
Control panel
Handle
Front panel
Castor
Louver
Left-side panel
Filter gridding
Back panel
Power cord
Water tank cover
Continuous
drainage hole
Right-side
panel
7
OPERATIONS
*****************************************************************
Indicator:
1. Power indicator: When the power is on, the power indicator shows green
whether the machine is running or not.
2. Water full indicator: When water tank is full, indicator light shows red
and the unit will buzz 15 times and then stop. Please empty the water tank
and put it back to correct position.
3. Timer indicator: The indicator light shows green when the timer is
working.
4. Low fan speed indicator: When the machine runs in low fan speed, the
low fan speed indicator shows green.
5. High fan speed indicator: When the machine runs in high fan speed, the
high fan speed indicator shows red.
6. Display: This indicator has 3 functions as below:
1. When the power is on, it shows indoor humidity;
2. When you adjust humidity, it shows the humidity setting data;
8
3. When setting the timer on/off, it shows timing setting data.
Control Panel:
1. Power button:
Press this button to turn on/off the unit. Do not unplug the power cord
directly to force the machine to stop working.
The buzzer will buzz when plugging the unit for the first time. Press this button to turn
on the unit and the primary setting humidity is 50% along with low fan speed.
2. Timer button:
Press this button to set timing from 0 to 24 hours in one-hour increment. If
you want to cancel timing, press this button until the display shows '00'.
3. Humidity setting button:
Press this button to adjust the humidity (The initial setting humidity is 50%):
50%→55%→60%→65%→70%→75%→80%→40%→45%→50%.
When the indoor humidity is lower than the setting humidity, the machine stops
automatically.
4. Fan speed setting button:
Press this button to switch the fan speed between HIGH and LOW fan speed.
*****************************************************************
9
WATER DRAINAGE
I. Water Tank:
When the water tank is full and reaches the capacity (1.5L), the water full indicator will
show red and keep warning.
Take out the water tank, empty the water inside, and put it back into the dehumidifier.
II. How to empty the water tank:
1. Pull out both sides of water tank as below
2. Empty the water tank
Cautions!
1. Do not remove the float from the water tank, otherwise, the machine will not stop
working when the water tank is full. Then the overflow water maybe make
damage to your floor.
2. Drain the water tank completely when water tank is full and reset your setting.
3. If the water tank is dirty, clean it by cool or warm water. Do not use cleaner, steel
Pull the water tank at
the back of the
machine slightly; the
water tank is forced
to move out.
10
wool, chemical rag duster, gas oil, benzene, thinner or other solvent to clean it, otherwise,
it would damage the water tank and lead to leakage.
4. When putting the water tank back to the unit, please push it into the correct position
of the machine with both hands. Otherwise, the water full indicator will still show red
and the machine can not work.
III. Continuous drainage:
1. Open the cover on the back of the dehumidifier;
2. Take out the water tank;
3. Insert a 9.5mm (inner diameter) PVC pipe, and the recommended length is 300 mm;
put the other side into a container, such as a bucket.
NOTE: PVC pipe needs to be purchased separately.
Step:
2. Remove the
plastic at the water
level place
1. Take out the
water tank
3. Insert the pipe
into the hole of
water outlet
4.Put the drain pipe to
the specific location
Tabla de contenidos
