Car Keys Express GMPRR-7011-0 Manual de usuario
V2.0221
USER GUIDE
Pairing Instructions for Chevrolet, Buick, GMC, Cadillac,
Oldsmobile, Pontiac, Saturn, Suzuki Replacement Remotes.
Instruction Manual Part Number: GMPRR-7011-0
REPLACEMENT
REMOTE
Replacing car keys is simple and affordable again.™
www.CarKeysExpress.com
USER GUIDE
2
IMPORTANT NOTES
►You MUST have your existing key that already works with your vehicle
in order to use the EZ Installer™. If you have no working keys, return the
entire product to the retailer where it was purchased.
►All existing, working remotes must be present during the pairing
process. Once you pair a new remote, all previous remotes will be
erased from the memory. The others will not be functional until you pair
them again.
►Vehicle battery should be in good condition and fully charged prior
to pairing the new remote. Turn off headlights, radio, A/C fan, etc. to
minimize battery draw during the process.
►Do not use the EZ Installer while the vehicle is in motion. Unplug it
from the OBD port before driving the vehicle.
►Only original remote features will work, regardless of buttons included
in this package. This remote does not add features your vehicle did not
have before.
►For your security, a tamper-evident security label is installed over the
EZ Installer connector. If this label is missing, damaged, or the word
"VOID" appears on the EZ Installer, please exchange this product for a
new one at the retailer where it was purchased.
►Before pairing, familiarize yourself with the remote’s compatibility with
the make, model, and year of your vehicle on pages 3-4.
LET’S GET STARTED
This product requires PAIRING. It’s important to follow these steps in
order to successfully complete setup.
If you skip a step, the remote WILL NOT work properly, and you’ll have
to repeat the setup process.
Find your PRIMARY DIAL POSITION in the following chart by
referencing your vehicle’s make, model, and year.
USER GUIDE
3
MAKE/MODEL
BUICK
CHEVROLET
CADILLAC
YEARS PRIMARY
DIAL POSITION ALTERNATE
DIAL POSITION
LeSabre 2001-2005 5
Astro 2001-2005 See OBP A
Avalanche 2002 See OBP A
Blazer 2002-2005 See OBP A
Classic 2004-2005 5
Corvette 2001-2004 See OBP B
Express 2003-2007 5
Impala 2001-2005 See OBP C
Malibu 2001-2003 5
2004-2005 3
Monte Carlo 2001-2005 See OBP C
S10 Pickup 2002-2004 See OBP A
Silverado 2001-2002 See OBP A
SSR 2003-2006 5
Suburban 2001-2002 See OBP A
Tahoe 2001-2002 See OBP A
Deville 2001 4 5
2002-2005 5
Eldorado 2001-2002 5
Seville 2001-2003 4 5
2004 5
COMPATIBILITY LOOKUP
USER GUIDE
4
REMOTE PAIRING INSTRUCTIONS
Instructions have timing requirements. If you wait too long between
steps, your vehicle’s computer may time out, requiring you to start
over. Once you begin the pairing procedure, move at a quick and even
pace.
NOTE: If the EZ Installer is left in the vehicle’s on-board diagnostic
(OBD) port for more than 5 minutes, an alarm will sound reminding you
to remove it.
NOTE: If at any point the EZ Installer continues to beep rapidly, please
refer to the FAQ section for more information.
GMC
OLDSMOBILE
PONTIAC
Safari 2001-2005 See OBP A
Savana 2004-2007 5
Sierra 2001-2002 See OBP A
Sonoma 2002-2004 See OBP A
Yukon 2001-2002 See OBP A
Yukon Denali 2001-2002 See OBP A
Alero 2002-2004 5
Aurora 2001-2003 5
Bonneville 2001-2005 5
Grand AM 2001-2005 5
Grand Prix 2004 4
Visit CKESimpleKey.com for the most up-to-date vehicle compatibility list.
USER GUIDE
5
NOTE: This procedure will erase all old remotes when starting the
programming procedure. You MUST have all existing remotes present
during the programming process. Remotes can be added at any time
using the EZ Installer, but each time it is used the remote memory will
be erased. You may add up to 4 total remotes during this procedure.
1. Find your vehicle’s make, model, and year in the COMPATIBILITY
LOOKUP on pages 3-4. Turn the dial on the EZ Installer to the
position listed for your vehicle’s make, model, and year.
NOTE: If more than 1 dial position exists for your vehicle, try the
PRIMARY dial position first. If you’re unable to successfully pair the
remote, try the ALTERNATE dial position listed for your vehicle.
NOTE: One working key should be present during the pairing
process.
2. Begin with the vehicle in PARK and the engine OFF.
3. Enter the vehicle and close all doors.
4. Insert the key into the ignition and turn the key to the ON position.
This should be the position before starting the vehicle, see below.
DO NOT start the vehicle.
5. Remove the security label from the EZ Installer and insert it firmly
into the on-board diagnostic (OBD) port located under the dash.
a. The location of your vehicle’s OBD port can be found in the
owner’s manual.
6. The EZ Installer will beep twice when it powers up and starts the
process.
7. The EZ Installer will sound a short tune when programming mode
has started.
a. Your vehicle may or may not provide feedback such as the door
lock cycling, a message on the dashboard, or a chime.
GM IGNITION POSITIONS
USER GUIDE
6
8. After hearing this short tune, press and hold both Lock and Unlock
on your new remote for approximately 30 seconds.
9. Repeat step 8 for each additional remote to be programmed.
10. After all remotes have been added, turn the key to the Off position
and unplug the EZ Installer.
11. Press buttons on each remote to test they were properly
programmed to the vehicle.*
*Some vehicles may need to have the engine started and stopped, and
the driver's door opened and closed before the remotes will work.
OBP (ON BOARD PROGRAMMING)
These vehicles do not require the EZ Installer device to PAIR your new remote.
When the instructions below tell you to “turn the ignition to the ON
position,” reference the picture below for how far to turn the key. DO
NOT START THE VEHICLE.
OBP A
1. Close doors and insert key into ignition (do not turn key on).
2. Press and hold the power Unlock switch on the driver's door. Keep
the switch held until step 8 below.
3. Complete the next 4 steps quickly.
4. Turn the ignition to the ON position.
5. Turn the ignition to the OFF position.
6. Turn the ignition to the ON position.
7. Turn the ignition to the OFF position.
8. Release the power Unlock switch. The vehicle should lock and
unlock the doors automatically.
9. Hold both Lock and Unlock buttons down on your new remote
GM IGNITION POSITIONS
USER GUIDE
7
until the doors lock and unlock. This may take up to 30 seconds.
10. Repeat step 9 for each additional remote (including any original
remotes).
11. Turn the ignition to the ON position to exit programming mode.
OBP B
1. Turn the ignition key to the ON position and the radio OFF.
2. Press the RESET button on the Driver Information Center (DIC) to
the right of the dashboard instrument cluster.
3. Press OPTIONS button on DIC until dashboard display is blank.
4. Press and hold the RESET button for 3 seconds.
5. Press OPTIONS button until FOB TRAINING is displayed on the
dashboard display.
6. Press RESET button to begin programming sequence.
7. Simultaneously press and hold Lock and Unlock buttons on the
first remote for 13 seconds. A message will appear when the
remote is programmed. Repeat this step for additional remotes up
to a maximum of 3 remotes total.
8. Turn ignition OFF and remove keys from ignition.
OBP C
1. Turn the ignition key ON and the radio OFF.
2. Press and hold the DISP button on the radio for at least 5 seconds
until SETTINGS is displayed.
3. Press the SEEK up or down arrows on the radio until FOB PROG
appears on the radio display.
4. Press the PREV or NEXT button to enter the sub menu. The
current selection will have an asterisk next to it. BEGIN will be
displayed.
5. Press the DISP button to start programming. When the message
PUSH FOB flashes, press and hold the LOCK and UNLOCK buttons
on your new remote at the same time for 15 seconds. A chime will
be heard to verify the transmitter is learned.
6. Repeat step 5 for each additional transmitter up to four remotes
total. You do not need to press the DISP button again. Just press
down the LOCK and UNLOCK buttons on the next remote to be
learned.
7. To exit Programming Mode, use the SEEK arrows to scroll until
USER GUIDE
8
EXIT appears on the display.
8. Press the DISP button to exit programming. A chime will be heard
to verify the exit.
FREQUENTLY ASKED QUESTIONS
Q: Can I use the same EZ Installer on other vehicles?
A: No. The EZ Installer will be locked to the first vehicle it is used on.
You may add more remotes to the same vehicle again as needed, but it
will not work on different vehicles. If the EZ Installer sounds 3 beeps at
1 second intervals, and then beeps rapidly, this signifies the device has
already been used on another vehicle. Visit CKESimpleKey.com or your
local retailer to purchase additional remotes.
Q: The new remote won’t pair to my car. What should I do?
A: If the EZ Installer doesn’t pair the remote to your car, most likely,
an incorrect dial position was used. In this case, the EZ Installer will
beep continuously after you press the pairing button. Check the
compatibility section on pages 3-4 to confirm the correct dial position
for your make, model, year, and button configuration of your original
remote. Remove the EZ Installer, turn the Ignition off and try the
pairing process from step 1. If the remote still won’t pair, please contact
customer service at (888) 598-8910.
Q: The EZ Installer was unplugged during the pairing process. What
should I do?
A: The EZ Installer must remain plugged into the on-board diagnostic
(OBD) port until pairing is complete. If the EZ Installer becomes
unplugged during the pairing process, turn the ignition to the OFF
position, remove the key, and begin the pairing process again.
FCC REGULATORY STATEMENTS
FCC ID: 2AOKM-GV3
USER GUIDE
9
47 CFR §15.19(a)(3) THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS. (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
NOTE: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
HELP
For help or assistance, please contact technical support at (888) 598-8910.
OTHER KEYS
Visit CarKeysExpress.com/store to find a variety of award-winning
products, like Universal Car Keys, Universal Car Remotes, and OEM keys
and remotes.
USER GUIDE
10
PAGE INTENTIONALLY LEFT BLANK.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Arranque remoto de Car Keys Express
Car Keys Express
Car Keys Express Simple KEY Manual de usuario
Car Keys Express
Car Keys Express HORM-6HS0RE Manual de usuario
Car Keys Express
Car Keys Express GMRM-6THZ1RE Manual de usuario
Car Keys Express
Car Keys Express HORM-30RE Manual de usuario
Car Keys Express
Car Keys Express GMCRR-7030 Manual de usuario
Car Keys Express
Car Keys Express GMRM-4TZ1RE Manual de usuario
Car Keys Express
Car Keys Express GMRM-MZ1RE Manual de usuario
