Easy Installation Guide
For Models CPS-5 and CPS-6
1
2
35
Item
No.
Part Description Quantity
1 Nylon Cover 4
2 Reinforcement Washer 4
3 5/16 inch bolt 4
4 Rubber bumper 4
55/16 inch at washer 4
65/16 inch split lock washer 4
7 5/16 inch nut 4
Parts List
47
6
Use a forklift or other device to center and
raise the Cap-Pack®Sport in the cap until it
gently makes contact with the cap ceiling.
Determine the Cap-Pack®Sport
set back by measuring the vertical
distance from cap ceiling to the top of
cap door opening. (NOTE: If the door
hinge extends lower than cap door
opening, measure to the bottom of
the hinge instead. Be sure to measure
from the at part of cap ceiling, not a
sloping corner.) This measurement is
the needed setback from the outside
of the Cap-Pack®Sport handles to
the cap door opening. See examples
below.
Thank you for purchasing this Cap-Pack®Innovative Truck Storage product. Visit our website at https://www.cap-pack.com
/accessories.html for information on additional accessories.
Example 1
Flat portion of cap ceiling
Start (top) of Cap Door Opening
IMPORTANT
Cap-Pack® Sport set back distance
MUST be as far as
vertical measurement to cap door
opening from at part of cap ceiling.
Set back distance 5 ½ in.
Vertical Distance
to Door Opening
5 ½ in.
Cap-Pack® Sport handles
Set back distance
5 ½ in.
Set back distance
5 ½ in.
Flat portion of cap ceiling
Start (top) of Cap Door Opening
Example 2
Set back distance 7 in.
Cap-Pack® Sport handles
Vertical Distance
to Door Opening
7 in.
Set back distance
7 in.
Set back distance
7 in.
1
STEP
2
STEP
Measure vertical
distance from
cap ceiling
to door
opening
Set back is the measured distance
CAUTION: The Cap-Pack®Sport is rated for 100 lb. capacity
(evenly distributed weight).
