Canyon CNS-SB41 BG Manual de usuario

SMART WATCH

USER GUIDE

CNS-SB41 BG/BR

Activate the device by short clicking the

Touch Button.

To use the watch conveniently and

effectively, download the Canyon Fit

app, by scanning the QR code in the

guide or below:

The navigation and option selection principle is similar for the whole menu. For all

the guide sections, short clicking the Touch Button is for switching / “toggling”, and

long clicking is for selection. In all the guide schemes this is marked by a single or a

double arrow symbol.

This watch does not have a Touch Screen, that is why the only sensitive element

on the screen is the Touch Button. The Touch Button is used for all actions - brieﬂy

clicking or pressing and holding the Touch Button.

The presence of various sensors in the watch does not guarantee the accuracy of

the physical measurements and can only serve as an approximate measure of the

stated physical variables.

These devices are not designed to give absolute physical measurements.

CAUTION!

Important!

The main screen weather is

displayed only when View 1

is selected and the watch is

connected to the smartphone

through the Canyon Fit program.

The main screen displays the time

and date, battery level, weather,

and the Bluetooth activation icon.

To change the screen view, press

and hold the touch key

Three main screen views are

available

DEVICE USE:

FIGURE 1.

FIGURE 2.

Caution!

Pulse rate readings are

informational only, can differ from

actual values and shall not be

used for medical diagnosis.

FIGURE 3

Main menu.

MAIN MENU

Available main menu options are as follows:

1. Steps. This screen displays the number of steps made

during the day. The steps are counted by means of an

integrated pedometer, i. e. a special sensor, which is sensitive

to arm motions.

2. Distance. This screen displays the distance traveled.

Values are calculated based on the pedometer readings

using a pre-set mathematical model.

3. Calories. This screen displays burned calories. Values are

calculated based on pedometer readings and using a pre-set

mathematical model.

4. Sleep. The total duration of sleep is displayed.

Your sleeping and waking times are recorded by the

integrated G-Sensor and heart rate monitor, which are

sensitive to the absence of active movements and heart rate

changes.

5. Pulse. To start the pulse rate measurement procedure,

stay on this screen for approximately 20 seconds. After a

short period, the ﬁrst measured values will appear on the

screen, which then gradually begin to change until the value

stabilizes.

Your watch has an integrated heart rate monitor, which

operates based on the infrared photoplethysmography

(PPG) principle. For more accurate measurements, make

sure that the back watch surface ﬁts snugly against your

arm. Try to make measurements in a relaxed sitting position,

bending the arm, so that the watch is in a position 1.5-2 cm

above the elbow level.

6. Sports. This menu item is the main submenu for practicing

various sports and tracking the results. To select the type of

training and start training, press and hold the touch button.

A training submenu opens showing the type of workouts

that can be selected by brieﬂy clicking the Touch Button, the

user can choose a sport for training. Touching the button

FIGURE 4.

Sports submenu

The ﬁrst screen in the Sports submenu is

the Walk screen. If you then press the Touch

Button, other training modes will be displayed

and will change until the user selects one of the

types of training. If the user does not wish to

select any of the training modes, to discontinue

scrolling through the whole list, you can return

to the main menu by short clicking the Touch

Button

To select one of the training modes, press and

hold the Touch Button.

After entering the sports menu, the training

mode will start with the measurement of the

following: the duration of the training, the

pulse readings, the number calories burned,

the distance, etc., depending on the type of

training chosen. You can see the results of the

training by “toggling through” the screen with

short clicks of the touch button - your results

(calories, pulse, distance and steps) will each

be displayed in turn on the screen.

To end a workout and exit to the Sport

submenu, press and hold the touch button.

Before returning to the main menu, you will see

a message, which informs you that the training

was successful or that your efforts were not

suﬃcient to register results.

All training control version re shown in Fig. 4.

SPORTS SUBMENU

announcement

Touching the button

Holding the

button

Caution!

Notiﬁcations

don`t show the full text of

messages. It`s possible to read

the message entirely only on the

smartphone.

MAIN MENU

FIGURE 5

Additionally submenu

8. Messages. This section collects all

notiﬁcations about calls and messages on

the phone. To view received notiﬁcations,

enter the submenu by clicking and

holding the Touch Button. You can view

the notiﬁcations by means of short

clicking the Touch Button. The last click

will bring you to the main menu.

9. Additionally. In this submenu, you can

select the Find Phone* function, read the

device information, download Canyon Fit

app using the QR code, as well as reset

device settings to the default factory

settings or switch off the device.

The additional submenu is shown in

detail in Fig. 5

In this watch model there is also the

ability to remotely control the camera

of the smartphone. To use this function,

switch on the remote camera control in

the Canyon Fit app on your smartphone.

After selection of this option, you can

control remotely your smartphone

camera. Make photos by short clicking

the Touch Button.

Touching the button

Holding the

button the function is available only when the

device is connected to the smartphone

via the Canyon Fit app

The general arrangement of all screens and navigation principle are shown in Fig 6.

FIGURE 6.

General arrangement of menu screens

GENERAL

ARRANGEMENT

Touching the button

Holding the

button

Otros manuales para CNS-SB41 BG

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mirar de Canyon

Canyon

Canyon Marzipan CNS-SW75 Manual de usuario

Canyon

Canyon SW-78 Manual de usuario

Canyon

Canyon Wasabi Manual de usuario

Canyon

Canyon Marzipan Manual de usuario

Canyon

Canyon CNS-SW51BB Manual de usuario

Canyon

Canyon Sanchal Manual de usuario

Canyon

Canyon Oregano Manual de usuario

Canyon

Canyon Lollypop SW-63 Manual de usuario

Canyon

Canyon Polly Manual de usuario

Canyon

Canyon CNS-SW7 Manual de usuario

Canyon

Canyon Marzipan CNS-SW75PP Instrucciones de funcionamiento

Canyon

Canyon OTTO CNS-SW86 Manual de usuario

Canyon

Canyon Sammy CNE-KW21 Manual de usuario

Canyon

Canyon CNS-SW72BB Manual de usuario

Canyon

Canyon Sandy KW-34 Manual de usuario

Canyon

Canyon Black Salt Manual de usuario

Canyon

Canyon Jondy CNE-KW44 Series Manual de usuario

Canyon

Canyon CNS-SW51BB Manual de usuario

Canyon

Canyon Semifreddo SW-61 Manual de usuario

Canyon

Canyon SW82 Manual de usuario

Canyon

Canyon TONY KW-31 Manual de usuario

Canyon

Canyon Wildberry SW-74 Manual de usuario

Canyon

Canyon My Dino KW-33 Manual de usuario

Canyon

Canyon SB-02 Manual de usuario

Manuales populares de Mirar de otras marcas

Pandora

Pandora WATCH2 Manual de usuario

Casio

Casio QW-4343 Manual de usuario

Suunto

Suunto X6 Manual de usuario

Seiko

Seiko N830 Manual de usuario

MotionX

MotionX 365 Manual de usuario

Garmin

Garmin VENU SQ 2 Manual de usuario

QCY

QCY Watch GTC Manual de usuario

Esq

Esq Watches Guía de instalación

Crane

Crane AA5-CDSM-3A Manual de usuario

Timex

Timex W-214 Manual de usuario

DETOMASO

DETOMASO MATERA Manual de usuario

Geemarc

Geemarc Watch N Shake Manual de usuario

LORUS

LORUS W590 Manual de usuario

STENLILLE

STENLILLE Actío Manual de usuario

Casio

Casio 5594 Manual de usuario

Sinn

Sinn HUNTER'S WATCH 3. Edition Manual de usuario

Slazenger

Slazenger SLZ800 Manual de usuario

iTOUCH

iTOUCH 3360 Manual de usuario