Canon VC-C3 Manual de usuario

VC-C3

Control Software v1.0

Users Guide

For Windows 95

*+,;,

VISUAL COMMUNICATION SYSTEMS

Important Usage Instructions

Please read this software instruction manual and the

VC-C3 Camera Instruction Manual carefully before

use and keep it at hand for reference to ensure

optimum performance.

publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language in any form by any means without the

expressed, written permission of Raster Builders, Inc.and Canon U.S.A., Inc.

Licenses and Trademarks

Canon is a registered trademark on Canon Inc. Adobe is a registered trademark

of Adobe Systems Incorporated. Microsoft and Microsoft Windows are registered

trademarks of Microsoft Corporation. PictureTel is a registered trademark of

PictureTel Corporation.

All other trademarks or registered trademarks are the property of their respective

owners.

CONTENTS

BEFORE YOU BEGIN ..............................................................................2

Introduction

System Requirements

The VC-C3 Control Software Package

Registration

GETTING STARTED ................................................................................3

Connecting the VC-C3 Camera to Your Computer

Using Multiple Cameras

INSTALLING SOFTWARE ..........................................................................5

Installation

Start Up Operation

PROGRAM OPTIONS CONFIGURATION ......................................................8

Communications

Pan/Tilt Speed

Zoom Speed

Options

CAMERA CONTROL FUNCTIONS ............................................................11

PEDESTAL CONTROL FUNCTIONS ..........................................................12

SETTING PRESETS ................................................................................13

PRESET CYCLE MODE .........................................................................14

IMAGE CONTROL – AUTO ....................................................................15

Exposure Settings

White Balance

IMAGE CONTROL – MANUAL ................................................................16

AGC

Shutter Speed

Iris

White Balance

WIRELESS CONTROLLER.......................................................................18

VC-C3 INFORMATION..........................................................................19

USAGE WITH VIDEOCONFERENCING APPLICATIONS ..................................20

APPENDIX A – RS-232 PIN OUTS .........................................................22

BEFORE YOU BEGIN

Introduction

Welcome to the VC-C3 Control Software – proprietary control software

for the Canon VC-C3 Communication Camera that enables you to

control all of the features and functions of the camera via Microsoft

Windows 95.

You will find that the VC-C3 Control Software allows you to incorpo-

rate the VC-C3 camera into many different applications. For example,

the VC-C3 camera is ideal for Videoconferencing, VideoMail, Desktop

Video, Surveillance, Remote Monitoring and many other applications

that require the control of a full motion video camera.

In addition to the VC-C3 Control Software, Canon offers a VC-C3

Software Developer’s Kit package that allows programmers to incorpo-

rate the VC-C3 control features into their own applications.

System Requirements

To use the VC-C3 Control Software you need:

•A Windows 95 Compatible PC running Microsoft Windows 95

•A Microsoft compatible mouse

•A Canon VC-C3 Communication Camera

The VC-C3 Control Software Package

Your VC-C3 Control Software Package contains:

•VC-C3 Control Software (3 1⁄2” diskette)

VCC3.EXE ................ VC-C3 Control program

VCC3.PDF ................ Users guide in Adobe Acrobat format

README.TXT.......... Readme file

•VC-C3 Control Software User Guide

Registration

We are confident that you will find the VC-C3 Control Software

extremely helpful in utilizing the Canon VC-C3 Communication

Camera with your personal computer. So that we can continue to

provide you with the highest quality software, technical support, and

keep you informed about new VC-C3 software developments, please

send us the enclosed registration page or e-mail us your full address and

what product you are registering for. Please feel free to include any

comments or suggestions.

GETTING STARTED

Connecting the VC-C3 Camera to Your Computer

To connect the VC-C3 camera to your PC, will require a specially

pinned RS-232 control cable. Do not attempt to use any other RS-232

cable besides the one that Canon sells for the VC-C3 camera. The VC-

C3 camera has a special pin configuration and will NOT work with an

ordinary RS-232 cable. If you do not own the Canon RS-232 control

cable, contact the nearest Canon VC-C3 camera reseller for purchasing

information or see Appendix A for the pin outs of the cable.

Before connecting or disconnecting any hardware from your computer,

always turn your computer off first.

Connect the 8-pin DIN connector end of the cable to the RS-232 port

on the back of the VC-C3 camera and connect the 9pin DSUB connec-

tor end of the cable to any available serial port on the back of your

computer (COM1 – COM4).

If your computer is additionally equipped with a real time video capture

card you can connect either the Video Out or S-Video Out from the

VC-C3 to your computer. This will enable you to display the VC-C3

video directly on your computer screen. If your computer is not

equipped for such a configuration, you can use any standard NTSC

video monitor to view the video output.

VC-C3 Connection Diagram

Personal Computer

RS-232 Cable

RCA–Composite

and/or S-Video Out

Video Monitor

Using Multiple Cameras

To connect more than one VC-C3 camera to your PC, will require one

available COM port for each camera, up to a maximum of four. You

still must use the special RS-232 control cable for each camera. Do not

attempt to use any other RS-232 cable besides the one that Canon sells

for the VC-C3 camera. The VC-C3 camera has a special pin configura-

tion and will NOT work with an ordinary RS-232 cable. If you do not

own the Canon RS-232 control cable, contact the nearest Canon VC-C3

camera reseller for purchasing information or see Appendix A for the

pin outs of the cable.

Before connecting or disconnecting any hardware from your computer,

always turn your computer off first.

Connect the 8-pin DIN connector end of the cable to the RS-232 port

on the back of the VC-C3 camera and connect the 9pin DSUB connec-

tor end of the cable to any available serial port on the back of your

computer (COM1 – COM4). Repeat this for as many cameras, up to 4,

that you have available COM ports for.

If your computer is additionally equipped with a real time video capture

card you can connect either the Video Out or S-Video Out from the

VC-C3 to your computer. This will enable you to display the VC-C3

video directly on your computer screen. If your computer is not

equipped for such a configuration, you can use any standard NTSC

video monitor to view the video output.

VC-C3 Connection Diagram (Multiple Cameras)

Personal Computer

RS-232 Cables

* The majority of computers sold come equipped with 2 COM ports

(COM1 and COM2). To connect more than 2 VC-C3 Cameras to your

computer may require the installation of additional COM ports via an

upgrade card. Please see your computer dealer for information on this.

(COM1)(COM2)(COM3)*

INSTALLING SOFTWARE

Installation

To install the Canon VC-C3 Control software on a computer running

Windows 95, follow these steps:

1) Open your local hard drive (usually c:) to view the contents of the

root directory.

2)From the file menu select New > folder and name it VC-C3 Control.

3)Drag copy all of the files from the VC-C3 Control Software distribu-

tion diskette into that folder.

4)Open the newly created VC-C3 Control folder

5)The VC-C3 icon should appear in this folder if successful.

6)Open the Readme.txt for last minute updates to the manual and

operation of the VC-C3 Camera.

7)Double click the VC-C3.exe file to start the VC-C3 Control Software.

VC-C3 icon

Start Up Operation

1)Make sure the VC-C3 is connected to a serial port (COM1 is the

default setting in the software) and the power is ON.

2)Double click on the camera icon, VCC3.exe, to start the program.

The program first checks to see if the default COM port is present,

then checks to see if the VC-C3 is connected to it. The camera will

automatically initialize upon start up and the selected camera button

will show a green dot. If an error occurs, (see below) the dot will

blink red. Select another of the four camera buttons as required at

the bottom of the control window. The camera buttons 1 – 4

correspond to serial ports COM1 – COM4 on the computer.

If an error occurred:

1)Check that the serial port the

VC-C3 is connected to is the

same as the camera button you

are using in the software. If you

are sure that the proper serial port

is selected, cycle the power switch

on the back of the VC-C3 and

select ‘Initialize Camera’ from the

drop down ‘System Menu’ in the

upper left corner of the applica-

tion window.

2)If a COM port is not configured

properly by your computer or you

do not have a specific COM port

this message will be displayed:

3)If you have the COM port configured but it is being used by another

device such as a modem, this error will be displayed:

4)If the VC-C3 is not connected to the selected configured COM

port, this error will be displayed:

Note: There may be a several second delay before an error message

shows, depending on how far the initialization gets before an error is

encountered.

PROGRAM OPTIONS CONFIGURATION

Program Options

To access the Program Options window, choose ‘Program Options’

under the ‘System Menu’ in the upper left corner of the VC-C3 Control

Software application window.

Otros manuales para VC-C3

Tabla de contenidos

Otros manuales de Cámara de seguridad de Canon

Canon

Canon BU-51H Manual de usuario

Canon

Canon VK-16 Manual

Canon

Canon VB-C50i/VB-C50iR Guía del usuario

Canon

Canon VB-S32VE Manual de usuario

Canon

Canon VB-C300 Manual de usuario

Canon

Canon VB-S910F Manual de usuario

Canon

Canon VB-C50i/VB-C50iR Manual de usuario

Canon

Canon VB-M700F Manual de usuario

Canon

Canon Vb-C60 - Ptz Network Camera Manual de usuario

Canon

Canon VB-H610D Manual de usuario

Canon

Canon VB-M700F Manual de usuario

Canon

Canon VB-M600D Manual de usuario

Canon

Canon VB-S30D MKII Manual de usuario

Canon

Canon VB-H610VE Manual de usuario

Canon

Canon DU10-H-VB Manual de usuario

Canon

Canon VC-C50iR Manual de usuario

Canon

Canon VB-M40 Manual de usuario

Canon

Canon VB-C300 Manual de usuario

Canon

Canon VB-H761LVE Manual de usuario

Canon

Canon VB-M740E Manual de usuario

Canon

Canon VB-M40 Manual de usuario

Canon

Canon VB-M741LE Manual de usuario

Canon

Canon ME20F-SHN Manual de usuario

Canon

Canon VB-M50B Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario