Canon PIXMA TS300 series Manual de usuario
Guía de inicio
Lea primero Información de seguridad
e información importante (apéndice).
Getting Started
Read Safety and Important Information
(addendum) rst.
1
2
Instalación de la impresora.............................................página 1
Conexión con el ordenador y con el teléfono inteligente
o la tableta......................................................................página 4
Cómo sujetar
la impresora
Películas explicativas
Installing the Printer...........................................................page 1
Connecting with Computer and Smartphone/Tablet..........page 4
How to Hold Printer Explanatory Movies
1
ENGLISH
1. Unpack Box
□ Power cord □ FINE cartridge
□ Safety and Important Information
□ Getting Started (this manual)□ Setup CD-ROM for
Windows PC
2. Remove Tape and Turn on
1 Stand the printer on its back and remove the
orange tape stuck to the bottom of it. Return the
printer to its original position.
a
b
c
2 Remove the packing materials (such as orange
tape) from outside the printer.
3 Open the cover.
4 Remove the orange tape and the protective
material and discard them both.
5 Close the cover.
6 Connect the power cord.
Do not connect any cables except the power cord yet.
7 Press the ON/Stop button.
The ON lamp lights.
Lit
• If the Alarm lamp (A) ashes 9 times at a time,
press the ON/Stop button to turn off the power,
and then try again from step 3 of chapter 2
"Remove Tape and Turn on".
• If the Alarm lamp (A) ashes 4 times at a time,
proceed to the next step as it is.
(A)
Flashing
2
3. Install Inks
1 Open the cover.
2 aTake out the Color FINE cartridge from the
package.
bRemove the protective tape.
a
Do not touch.
b
Be careful of ink on the protective tape.
3 aInsert the Color FINE cartridge into the FINE
cartridge holder on the left at a slight upward
angle.
bPush the FINE cartridge in and up rmly until it
snaps into place.
Make sure that the FINE cartridge is installed
horizontally.
Do not bump it against
the surrounding parts.
Click!
a
b
3
ENGLISH
4 Repeat steps 2 to 4 and install the Black FINE
cartridge as well, on the right.
5 Close the cover.
If the Alarm lamp ashes 4 times at a time, go
back to step 3 of chapter 3 "Install Inks" and check
whether the FINE cartridges for Color and Black are
installed correctly.
4. Load Paper
1 Open the paper support.
2 Slide the paper guide to the left.
3 Load plain LTR or A4 size paper against the right
edge with the print side facing up.
4 Slide the paper guide to align it with the side of the
paper stack.
5 Pull out the paper output tray and output tray
extension.
4
5. Preparing for Connection
From here on, the procedure differs depending on the device used to connect to the printer.
First, after checking that the Wireless lamp is ashing 2 times at a time, proceed to the following operations.
In the following description, smartphones and tablet devices are collectively described as smartphone.
When the Wireless lamp does not ash, try again
from chapter 2 "Remove Tape and Turn on".
Wireless
Flashing
• To use the printer by connecting only to a computer or both to a computer and smartphone
"6-A. Connecting to Computer"
• To use the printer by connecting only to a smartphone
"6-B. Connecting to Smartphone" on page 6
6-A. Connecting to Computer
macOS
Windows
You need a connection setup for each computer. Proceed with the setup from step 1 for each computer.
1 Start the setup le for either method or method .
aOpen a web browser ( etc.) on your computer.
bInput the following URL and access the Canon
website.
cSelect Set Up.
dInput the model name of your printer and click OK.
You can select a model name from the list.
eClick Setup.
The procedures for Windows and macOS are shown
below. If you are using a computer with an OS other
than Windows or macOS, such as a Chrome OS, do
the setup according to the on-screen instructions.
fClick Download and download the setup le.
gExecute the downloaded le.
Proceed to step on the next page to
continue.
Downloading from the Internet
5
ENGLISH
The connection with your computer is now complete. You can print from your
computer.
If the following screen appears, click Exit.
Follow the on-screen
instructions to proceed
with the setup.
Using Setup CD-ROM (Windows Only)
aLoad the Setup CD-ROM in your computer.
■ When using Windows 10 or Windows 8.1:
bWhen the following message appears on the right
side of your computer screen, click it.
cIf the following screen appears, click Run
Msetup4.exe.
dIf the User Account Control dialog box appears,
click Yes.
When This Message Does Not Appear (or Has
Disappeared)
1. Click File Explorer on the taskbar.
or
2. Click This PC on the left side of the opened window.
3. Double-click the CD-ROM icon on the right side of
the window.
If the contents of the CD-ROM appear, double-click
Msetup4.exe.
4. Proceed to step d.
■ When using Windows 7:
b When the AutoPlay screen appears, click Run
Msetup4.exe.
c If the User Account Control dialog box appears,
click Continue.
When AutoPlay Screen Does Not Appear
1. Click Computer from the start menu.
2. Double-click the CD-ROM icon on the right side of
the opened window.
If the contents of the CD-ROM appear, double-click
Msetup4.exe.
Proceed to step to continue.
2 Click Start Setup.
6
6-B. Connecting to Smartphone
Android
iOS
You need a connection setup for each smartphone. Proceed with the setup from step 1 for each smartphone.
Preparation
• Turn on Wi-Fi on your smartphone.
• If you have a wireless router, connect your smartphone to the wireless router you want to connect to the printer.
* For operations, refer to manuals of your smartphone and the wireless router or contact those manufacturers.
1 Install the application software Canon PRINT Inkjet/SELPHY in your smartphone.
: Search "Canon PRINT" in App Store.
: Search "Canon PRINT" in Google Play.
Or access the Canon website by scanning the QR code.
* You may not connect your smartphone to the Internet wirelessly during connecting the printer to the smartphone directly.
In that case, you may be charged depending on the contract with your service provider.
* Up to 5 devices can be connected to the printer via wireless LAN connection directly.
2 Check the Wireless lamp, and then proceed to or .
aTap the installed application software.
bFollow the on-screen instructions to register the
printer.
cMake sure that the following screen appears.
The connection with your smartphone is
now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading
Photo Paper" on page 8.
If the Wireless lamp is not lit and the Network
lamp is lit, the printer cannot send transmissions
using a Wireless LAN connection. For details,
access "http://ij.start.canon" to see the
"Frequently Asked Questions".
Wireless
Network
Lit
Off or ashing (continue to )
Lit (continue to )
Wireless
7
ENGLISH
Procedures below vary depending on iOS or Android. Select your operating system and proceed to its
procedure.
aTap Settings on your smartphone's home screen,
and tap Canon_ij_XXXX in the Wi-Fi settings.
If Canon_ij_XXXX does not appear on the list, see
"Troubleshooting" below to operate the printer, and
then repeat step a.
bTap the installed application software.
cFollow the on-screen instructions to register the
printer.
Follow the on-screen instructions to proceed
with the setup.
If you select Auto Select Conn. Method
(recommended) on the connection method
selecting screen, the appropriate connection
method is selected automatically depending on
your environment.
dMake sure that the following screen appears.
aTap the installed application software.
bFollow the on-screen instructions to register the
printer.
If a message saying "Printer is not registered.
Perform printer setup?" does not appear, see
"Troubleshooting" below to operate the printer, and
then wait for a while until the message appears.
Follow the on-screen instructions to proceed
with the setup.
The appropriate connection method is selected
depending on your environment.
cMake sure that the following screen appears.
The connection with your smartphone is now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading Photo Paper" on page 8.
aPress and hold the Direct button on the printer for about 2 seconds until the Direct lamp starts to ash.
Flashing
bReturn to the operation of your smartphone.
Troubleshooting
Printer is not found from your smartphone.
8
1 Open the paper support.
2 Slide the paper guide to the left.
3 aLoad photo paper against the right edge with
the print side facing up.
bSlide the paper guide to align it with the side
of the paper stack.
a
b
4 Conrm that the Paper lamp that is lit matches
the paper size that is loaded.
LTR/
4"×6"/10×15cm
A4/Hagaki/L
If the Paper lamp that lights does not match the
paper size, press the Paper Select button.
LTR/
4"×6"/10×15cm
A4/Hagaki/L
5 Pull out the paper output tray and output tray
extension.
Loading Photo Paper
Smartphone Copy
You can copy documents by using the Canon PRINT Inkjet/SELPHY application software for
smartphones. To install the application, refer to step 1 on page 6. For the operation procedure, refer
to the Online Manual.
1 Load the document on the
printer.
2 Take a photo of the document
by using Canon PRINT Inkjet/
SELPHY.
3 Send the image data to the
printer and print it.
Otros manuales para PIXMA TS300 series
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Impresora de Canon
Canon
Canon Pixma iP6000 Manual de usuario
Canon
Canon GM2000 Series Manual de usuario
Canon
Canon imageClass LPB7100Cn Manual de usuario
Canon
Canon MF832Cdw Manual de usuario
Canon
Canon NP-6020 Manual de usuario
Canon
Canon S 820 Manual de usuario
Canon
Canon imagePROGRAF TZ-30000 Manual de usuario
Canon
Canon imageCLASS MF4100 Series Guía de seguridad
Canon
Canon i-SENSYS LBP122dw Manual de usuario
Canon
Canon S830D Manual de usuario
Canon
Canon PIXMA MX432 Manual de instrucciones
Canon
Canon PIXMA TS8120 Manual de usuario
Canon
Canon BUBBLE JET S630 Manual de usuario
Canon
Canon PIXMA mini260 Manual de usuario
Canon
Canon NP-1215 Manual de usuario
Canon
Canon imagePROGRAF W2200 Manual de usuario
Canon
Canon MAXIFY GX4000 Series Guía de configuración
Canon
Canon iPF710 - imagePROGRAF Color Inkjet Printer Manual de usuario
Canon
Canon LBP-2000 Manual de usuario
Canon
Canon PIXMA MP240 Manual de usuario
