Canon S830D Manual de usuario
Table of Contents
Preface 1
Shipping Materials 1
Introduction 1
Printer Parts and Their Functions 2
Setting Up 4
Preparing the Printer 4
Connecting the Printer to the Computer 4
Installing the Print Head 6
Loading Paper 9
Installing the Printer Driver 10
Aligning the Print Head 16
Basic Operations 22
Printing with Windows 22
Printing with Macintosh 24
Printing Without Using the Computer 26
Before Printing 26
Printing Photographs 35
Print Applications 44
If Photographs Cannot Be Printed Clearly
(Operation Panel Section)
49
If an Error Is Displayed on the Operation Panel 53
Print Head Maintenance 56
Notes on Handling the USB Interface (for Windows Users) 57
For Further Details... 58
Quick Start Guide
BUBBLE JET PRINTER
QA7-2140-V01
BE
Exif Print
This printer supports Exif 2.2 (also called “Exif Print”).
Exif Print is a standard for enhancing the communication between digital cameras and printers. By
connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shoot-
ing is used and optimized, yielding extremely high quality prints.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”,
ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur la matériel brouilleur: “Appareils Numériques”,
NMB-003 édicatée par l’Industrie Canada.
International ENERGY STAR®Program
As an ENERGY STAR Partner, Canon Inc. has determined that this product meets the ENERGY
STAR guidelines for efficiency.
The International ENERGY STAR Office Equipment Program is a global program
that promotes energy saving through the use of computer and other office equip-
ment. The program backs the development and dissemination of products with
functions that effectively reduce energy consumption. It is an open system in
which business can participate voluntarily. The targeted products are office equip-
ment such as computers, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using the
incorrect voltage could cause a fire or electric shock. The correct power supply voltages and frequen-
cies are as follows:
Europe AC 230V±10%, 50Hz
USA/Canada AC 120V, 60Hz
Australia AC 240V, 50Hz
1
Preface
■■
Shipping Materials
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
Thank you for purchasing a Canon Bubble Jet Printer.
Check that all the following items are in the box. If anything is missing or is damaged, contact
your Canon Authorised Dealer or Sales Representative.
❏Printer
❏Setup Software & User’s Guide CD-ROM
❏Quick Start Guide
❏Print Head
❏6 Ink Tanks
❏PCMCIA Card Adapter
❏Bubble Jet Printer - digital camera connection cables (Direct Interface cable DIF-B100/DIF-B250)
* Cables should be purchased separately according to your computer. For details on cable
types and specifications, refer to page 4.
■■
Introduction
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
This Quick Start Guide uses the following symbols to indicate important information. Always
observe the instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury caused by
incorrect operation of the equipment. These must be observed for safe operation.
Instructions that, if ignored, could result in personal injury or material damage caused by
incorrect operation of the equipment. These must be observed for safe operation.
Also read the Safety Precautions in the User’s Guide. Observe the warnings and cautions to
avoid personal injury or damage to the printer.
Trademark Notices
• Canon
®
is a registered trademark of Canon Inc.
• BJ™ is a trademark of Canon Inc.
• Microsoft
®
and Windows
®
are registered trademarks of Microsoft Corporation in the U.S.
and other countries.
• Apple, Mac and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S.
and other countries.
• CompactFlash is a trademark of SanDisk Corporation.
• MEMORY STICK is a trademark of Sony Corporation.
• SmartMedia™ is a trademark of Toshiba Corporation.
• All other trademarks and registered trademarks appearing in this Quick Start Guide are
the property of their respective owners.
Copyright ©2002 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form
whatsoever without the express written permission.
■■
Printer Parts and Their Functions
■■■■■■■■■■■■■■■■■■■■■
■Front View
2
Operation Panel
For details, refer to
"Operation Panel."
Card Slot
Use to connect the
PC card adapter.
Eject Button
Press to remove the
PC card adapter. Paper Output Tray
Paper Guide
When loading paper, ensure
the left edge just touches
this guide.
To move the paper guide,
pinch the knob and slide in
the appropriate direction.
Paper Rest
Camera Port
Use to connect the
printer to a digital
camera.
Sheet Feeder
Load paper here.
Paper feeds
automatically, one sheet
at a time.
Indicator lamp
Goes on when memory
card reading becomes
enabled and flashes while
the memory card is being
read. When this lamp
goes off, when the
memory card cannot be
read.
Front Cover
Open to replace the ink tanks or
remove jammed paper.
■Rear View
USB Port
Used to connect the printer to a
computer through a USB interface.
Image Viewer
Connection
Remove the cover when
installing the optional TFT
Image Viewer <<IV-100>>
(see page 32).
Power Cord Connection
Connector used to connect the supplied
power cord.
■Inside the Printer
3
Paper Thickness Lever
Adjusts the gap between the print head and the surface of the printing paper.
Print Head Holder
Install the print head here.
Reset Button
Press to resume printing once
an error has been cleared. The
printer will then initialise ready
for printing.
Also, to cancel printing in
progress when connecting to
the computer, press this button.
POWER Lamp
Off: the printer is turned off.
Green: the printer is ready to print.
Flashing green: the printer is preparing to print, or is currently printing.
Flashing orange: an error has occurred and the printer is not ready to print.
Flashing orange and green alternately: an error has occurred that may require a service call.
POWER Button
Press to turn the printer
on or off.
Print Head Lock Lever
Locks the print head into the holder.
Once the print head is installed, do not touch this lever.
■Operation Panel
For details on names and functions on the Operation Panel, refer to
“
Operation Panel Names
and Usage
”
on page 26.
4
1
Place the printer on a flat surface.
2
Remove the packing material and tape
from the printer as shown.
3
Attach the paper rest to the sheet
feeder.
4
Attach the paper output tray as shown.
Setting Up
■■
1
■
Preparing the Printer
■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■
2
■
Connecting the Printer to the Computer
■■■■■■■■■■■
➥
Note
If you are printing with only Direct Print, skip this section and go to
“
Installing the Print
Head
”
on page 6.
Use a USB cable.
USB cable
• Windows XP, Windows Me, Windows 2000, Windows 98
• Mac OS 8.6 or later
Recommended: Canon or other computer manufacturer cable, up to 2 meters in length.
paper output tray
paper rest
Follow the steps below to install the printer
driver correctly.
1
Ensure the printer and the computer
are switched off.
2
Connect the cable.
5
➥
Notes
•If your computer has an earth connection, ensure that this is attached.
• If you do not intend to use the printer for a long period of time, unplug the power cord
from the power outlet after turning off the printer.
➥
Note
If the Add New Hardware Wizard or Found New Hardware
Wizard screen appears when carrying out the following
operations, click Cancel and turn off the computer.
6
1
Plug the printer in.
2
Turn on the printer. Do NOT turn on
the computer yet.
The POWER lamp flashes and the printer begins
to operate. Wait until the POWER lamp remains
fully lit.
3
Open the front cover.
➥
Note
If the front cover is opened more than ten
minutes, the print head holder moves to the
right side. If this occurs, close the front cover,
and open it again.
4
Remove the tape.
■■
3
■
Installing the Print Head
■■■■■■■■■■■■■■■■■■■■■■■■
• Never attempt to plug the power cord into the power outlet or unplug the power cord
when your hands are wet.
•Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place
heavy objects on the power cord.
• Never use any power supply other than the standard power supply available in the
country of purchase. Using the incorrect voltage and frequency could cause a fire or
electric shock.
• Always push the plug all the way into the power outlet.
■Installing the Print Head
5
Raise the print head lock lever.
Do not touch internal parts other than the lock
lever.
7
6
Remove the protective cap from the
print head.
➥
Notes
•Do not touch the
print head nozzles or
electrical contacts.
• Do not attempt to
reattach the
protective cap once it
has been removed.
7
Place the print head in the holder.
8
Lock the print head into place by
lowering the lever.
Do not touch the lock lever once the print head
has been installed.
■Installing the Ink Tanks
•For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks.
1
Take out the yellow ink tank.
2
Pull the orange tape in the direction of
the arrow and remove the clear film.
electrical contacts
print head
nozzles
print head
holder
print head
8
3
Hold the ink tank as shown in the
diagram and remove the protective
cap.
➥
Notes
•Do not squeeze the sides
of the ink tanks as this
may cause the ink to leak
out and stain your clothes
and hands.
• Do not touch the ink port.
• Do not attempt to reattach
the protective cap once it
has been removed.
4
Insert the yellow ink tank into the right-
hand slot. Press the top until it clicks
into place.
5
Use the same procedure to install the
other ink tanks in their appropriate
slots.
Check the labels to ensure that each tank is in the
correct position.
➥
Notes
•Only install the ink tanks in the positions
specified by the labels.
• If ink tanks are not installed in the right
position, colours will not be printed
correctly. Immediately reinstall the tank in
the correct position and carry out print head
cleaning. For details, refer to the User’s
Guide.
6
Close the front cover.
Wait until the POWER lamp remains fully lit.
ink port
Black
Yellow
Magenta
Cyan
Photo Cyan
Photo Magenta
Otros manuales para S830D
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Impresora de Canon
Canon
Canon imagePROGRAF W2200S Manual de usuario
Canon
Canon imageFORMULA R40 Manual de usuario
Canon
Canon PIXMA iP8720 Manual de usuario
Canon
Canon PIXMA MG5500 Series Manual de usuario
Canon
Canon MG3600 series Guía de configuración
Canon
Canon SELPHY CP400 Manual de usuario
Canon
Canon PIXMA PRO-1 Series Manual
Canon
Canon BJC-6000 Series Manual
Canon
Canon PIXMA G7000 Series Manual de usuario
Canon
Canon imageCLASS MF242dw Manual de usuario
Canon
Canon MP638 Manual de usuario
Canon
Canon PIXMA iP1900 Manual de usuario
Canon
Canon imageRUNNER 2204 Manual de usuario
Canon
Canon E470 Series Guía de configuración
Canon
Canon iP90 - PIXMA Color Inkjet Printer Manual de instalación
Canon
Canon imagePROGRAF iPF6400S Series Guía del usuario
Canon
Canon iPF755 - imagePROGRAF Color Inkjet Printer Manual de usuario
Canon
Canon imagePROGRAF iPF8400S Manual de usuario
Canon
Canon imageRUNNER ADVANCE DX C5870i Manual de usuario
Canon
Canon imagePROGRAF iPF810 Manual de usuario
