Canon MK3000 Manual de usuario

MK3000

CABLE ID PRINTER

Supplement for the

MK3000 User's Guide

This document is a supplementary material to the separate User’s Guide

(MK3000).

4Y1-8640-020

* Please note that the contents of this manual are subject to change without notice.

Table of Contents

Page

Reference

Page in the

User’s Guide

Keyboard Comparison Figures

LCD Display Comparison Figures

Names and Functions of Keys

3-4

6-7

How to Read the Display

5-7

8-10

Use with Batteries

13-14

Basic Input Operations, Before Input

■Switching Character Input Method ■Keys and

Input Methods

9-10

Input Hiragana

11-12

Input Katakana

13-14

Input Alphanumeric Characters

Input Kanji

16-18

Change Display Language

Entering Symbols

Running the Firmware Update

186

Print Media

191

Romaji/Kana Input Chart

23-24

Symbol Chart

196

Kuten Code Chart

26-37

Please note that the [4. Print Using a Computer] feature shown on P.108~P.148 in the User’s Guide

cannot be used in the device manufactured for domestic use in Japan.

Keyboard Comparison Figures

The keyboard shown in the User’s Guide is different from the keyboard in the device

manufactured for domestic use in Japan, so please refer to the following comparison.

Your Device

User’s Guide

LCD Display Comparison Figures

The LCD display shown in the User’s Guide is different from the display in the device

manufactured for domestic use in Japan, so please refer to the following comparison.

Your Device

User’s Guide

Names and Functions of Keys

Please read this instead of P.6 and P.7 in the MK3000 User’s Guide.

[Format] key

Sets the page/text input orientation and the text frame.

[Style] key

Specifies character size, number of lines, and space

between characters.

[Length/Margin] key

Specifies the length of one tube (or one label), character

alignment, and margins.

[Conti.] key

Sets up repeat printing of a page.

[Number.] key

Sets numbering for text.

[Regist.] key

Sets up the saving and loading of data.

[Symbol] key

Use this key to enter a symbol.

Use [Shift]+[Enter] key to confirm a selected unconfirmed

symbol.

[Remove] key

This key is used to remove the tube or label tape from the

printer.

[Option] key

All functions can be set using this key.

[Delete] key

Deletes the currently entered characters and settings.

[Cancel] key

Press this key while printing to stop printing, and then

stop after cutting the print media. If you press and hold

this key for 2 seconds or more, the printer will stop

without cutting.

If pressed during the operation of a function, the

operation will be canceled. Also, pressing this key while

holding down [Shift] will return you to the character input

display.

[Back Space] key

Deletes the character to the left of the cursor position.

[Enter] key

Confirm the input of unconfirmed characters or selected

items.

Pressing this key after finalizing text input will insert a

page break at the cursor position.

[▲][▼][◀][▶]

( Arrow keys)

Move the cursor or selected item up, down, left or right. If

you press this key while holding down [Shift] in the

character input display, you can move to the next or

previous page.

[Print] key

Displays the printing preference display and allows you to

print the currently displayed data.

[Space/convert] key

Enter a space.

It also converts undetermined hiragana input into kanji.

[Input] key

Switches the character input method. (→P. 9)

[Caps Lock] key

If you press this key and then enter alphanumeric

characters, they will be capitalized.

NOTE

• In this manual, pressing and holding down the desired key while holding down [Shift]

will perform the following operations.

Example: [Shift]+[Cancel] keys

How to Read the Display

Please read this instead of P.8~P.10 in the MK3000 User’s Guide.

Character input method

Displays the character input method settings. (→P. 9)

a: Alphanumeric characters (lowercase)

A: Alphanumeric characters (uppercase)

R: Romaji ひ: Kana カ: Katakana

Print speed

Displays the printing speed settings.

H: High L: Low

Half cut setting

The settings for adding a half cut to tubes or label tapes are

indicated by the following symbols.

: Half cut.

: Not half cut, but a solid line is printed

showing where to cut with scissors, etc.

: Not half cut, but a dotted line is printed

showing where to cut with scissors, etc.

(No indication) : Not half cut, and no cutting line is printed.

Remaining Ink Ribbon

Indicates the remaining capacity of the ink ribbon with a mark.

(Ribbon

remaining)

…

: The display changes every 10%. When

the remaining capacity is low, prepare a

new ribbon cassette.

(Out of ribbon)

(Not displayed)

: The ribbon cassette is not loaded, or the

information cannot be read.

Power

The power source being used is indicated by the following

symbols.

: The AC adapter is being used.

: When the battery is being used, the

remaining battery charge is indicated by

this symbol.

(Power remaining)

…

(Out of power)

(If the battery is not sufficiently charged,

the remaining capacity may not be

displayed correctly.)

Warmer

Displays the settings for the (optional) tube warmer.

Auto

: Only warms the tube during printing. When

printing is executed, the tube will be

warmed up to the set temperature, and

then printing will start.

RDY

: Warms the tube except while printing.

When printing is executed, it starts printing

immediately. "WAI" will be displayed when

the set temperature is adjusted.

OFF

: Disables the tube warmer settings.

(No indication)

: The tube warmer is not set.

Cut Length/

Alignment/Margin

Displays the settings for the length (cut length) of a tube (or a

label), alignment, and margin of the current page.

•When using the "Automatic" cut length feature (The set

value is highlighted.)

Cut Length (mm)

Alignment (Centered “C” )

• When using the "Specify" cut length feature

Cut Length (mm)

Cursor

Text is entered at the position indicated by a ■.

Cont Print

Displays the number of times the current page will be printed

repeatedly.

Character Space

Displays the character space setting for the current page.

Lines

Displays the number of lines setting for the current page.

Character Size

Displays the character size setting for the current page.

Frame

Displays the frame setting for the current page.

Orientation

Displays the print orientation and character orientation

settings for the current page.

Page

Displays the page number of the current page.

:Displayed when there is a page before the current page.

:Displayed when there is a page after the current page.

NOTE

• This product treats the string of characters to be printed on one tube (or one label) as one

page. Press the [Enter] key to create a new page. (Page Break)

For more information on page manipulation and editing, refer to "Creating and Editing Pages

(P. 60)" in the User’s Guide.

Alignment (Centered “C”, Left-aligned “L”,

Right-aligned “R” )

Margin (mm)

Use with Batteries

Please read this instead of P.13 in the MK3000 User’s Guide.

If you are outdoors or in any other place where you do not have access to a power supply,

you can use the product with batteries.

Prepare six “eneloop standard model” AA rechargeable batteries (Part No.: BK-

3MCC) (sold separately).

Make sure that the power is turned off.

Remove the battery cover.

Insert the batteries.

●As shown in the figure❶ insert the battery

terminal into the printer, and ❷push it in.

●Paying attention to the direction in which

you insert the batteries, as marked with

the and symbols

CAUTION

• Be sure to use fully charged "eneloop AA Standard Model Batteries (Part No.:BK-

3MCC)”. Do not use any other type of battery. Failure to do so may result in fi re,

malfunction, or injury.

Otros manuales para MK3000

Tabla de contenidos

Otros manuales de Impresora de Canon

Canon

Canon PIXMA G5000 Series Manual de usuario

Canon

Canon PIXMA TS6151 Guía de configuración

Canon

Canon iP1700 - PIXMA Color Inkjet Printer Manual de usuario

Canon

Canon imagePRESS C850 Manual de usuario

Canon

Canon PIXMA TS7451 Manual de usuario

Canon

Canon imageCLASS D1120 Instrucciones de montaje

Canon

Canon imagePRESS C7000VP Series Manual técnico

Canon

Canon G1230 Guía de configuración

Canon

Canon iP100 - PIXMA Color Inkjet Printer Manual de usuario

Canon

Canon PIXMA G2560 Guía de configuración

Canon

Canon MP490 series Manual de usuario

Canon

Canon LBP228x Manual de usuario

Canon

Canon LASER SHOT LBP3500 Manual de usuario

Canon

Canon PIXMA iP4000R Series Manual de usuario

Canon

Canon Pixma iP110 series Manual de usuario

Canon

Canon iPF650 - imagePROGRAF Color Inkjet Printer Guía del usuario

Canon

Canon S820D Manual de usuario

Canon

Canon imagePROGRAF TX-2000 Guía de configuración

Canon

Canon imageRUNNER ADVANCE 8500 Series Manual de usuario

Canon

Canon S520 Manual de usuario

Canon

Canon PIXMA G2260 Manual de usuario

Canon

Canon i960 Series Manual

Canon

Canon PIXMA MP130 Manual

Canon

Canon MG7560 Guía de configuración

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario

Ricoh

Ricoh Aficio AP400 Manual de usuario

BIXOLON

BIXOLON SRP-352plusV Manual de usuario

Epson

Epson Stylus Photo PX700W Instrucciones de montaje

Ricoh

Ricoh SP204SF Manual de usuario

Star Micronics

Star Micronics futurePRNT TSP100 Manual de usuario

Epson

Epson TM-TM88V-i Manual de uso y cuidado