Canon imagePROGRAF W2200 Manual de usuario
2002.JUL CANON INC.
W2200
SERVICE
MANUAL
Application
This manual has been issued for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products are
sold. For this reason, there may be information in this manual that does not apply to your
locality.
Corrections
This manual could include technical inaccuracies or typographical errors due to improvements
or changes in the products. When changes occur in applicable products or in the content of
this manual, Canon will release technical information as the need arises.
The following paragraph does not apply to any countries where such provisions are inconsistent
The following paragraph does not apply to any countries where such provisions are inconsistentThe following paragraph does not apply to any countries where such provisions are inconsistent
The following paragraph does not apply to any countries where such provisions are inconsistent
with local law.
with local law.with local law.
with local law.
Trademarks
The product names and company names described in this manual are the registered
trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual
may not be copied, reproduced or translated into another language, in whole or in part, without
the written consent of Canon Inc., except in the case of internal business use.
Copyright©2002 by Canon Inc.
CANON INC.
NB Quality Assurance Div.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
This manual has been produced with the following applications.
All logos and illustration were created with Adobe®Illustrator®8.0.
All documents and page layouts were created with Microsoft®Word 2000.
i
TABLE OF CONTENTS
Part1㧦PRODUCT SPECIFICATIONS Page
1. PRODUCT OVERVIEW 1-1
2. SPECIFICATIONS 1-2
2.1 Printer Specifications
2.1.1 Printer Specifications
2.1.2 Printer life
2.1.3 Print head/ink tank life 1-3
2.2 Paper Specifications
2.2.1 Paper sizes and weights
2.2.2 Paper types
2.2.3 Printing area 1-4
2.3 BJ Cartridge/Ink Tank Specifications
2.3.1 Print head
2.3.2 Ink tank
3. PACKAGING CONFIGURATION 1-5
4. PARTSCODELIST 1-6
Part2㧦TROUBLESHOOTING
1. PRINTER OPERATION 2-1
1.1 Printer Operation Procedure
1.2 Status Indicator
1.3 Printer Panel Operation 2-2
2. SERVICING 2-6
2.1 Before Troubleshooting
2.2 Detectable Problems When System Startup Completed 2-7
2.3 Troubleshooting by Phenomenon 2-10
2.4 Printer Status Indication 2-11
2.5 Troubleshooting by Error 2-12
Error Indication 2-12, 13
Service Call Indication 2-14, 15
3. DISASSEMBLY AND REASSEMBLY 2-16
3.1 Cautions for Disassembly and Reassembly
3.1.1 Cautions for ink stains
3.1.2 Damage by static electricity
3.1.3 Deformation of spur tips
3.1.4 Ink drain
3.2 Exploded View 2-17
Main parts list 2-18
3.3 Disassembly and Reassembly 2-19
3.3.1 Carriage lock release
3.3.2 Installing and removing the purge unit
3.3.3 Removing and installing tap screws
3.3.4 Installing and removing the carriage encoder film 2-20
3.3.5 Handling the encoder film
3.3.6 Installing and removing the carriage unit
3.3.7 Removal of red screws prohibited
3.3.8 Installing and removing the ink supply unit
3.3.9 Installing and removing the carriage motor
ii
Page
3.3.10 Installing and removing the print head 2-20
3.4 Adjustments and Settings After Disassembly and Reassembly 2-21
3.4.1 Adjustments and setting list
3.4.2 Print Adjustment
3.4.3 Control board’s EEPROM initialization / destination settings 2-23
3.4.4 Clear the control board’s EEPROM waste ink counter
3.4.5 NIC board’s IP address settings 2-24
4. OPERATION CHECK AFTER DISASSEMBLY AND REASSEMBLY 2-25
4.1 Check Procedure
4.2 Cautions when Replacing the Control Board
5. TRANSPORTING THE PRINTER 2-26
5.1 Preparation before Transportation (place in the carton)
5.2 Moving the Printer
6. PARTS REPLACEMENT, PERIODIC INSPECTIONS & TOOL 2-27
6.1 Parts Replacement
6.2 Periodic Inspections
6.3 Tool List
7. SERVICE MODE 2-28
7.1 How to Enter the Service Mode
7.2 Shipment Inspection Pattern 2-29
7.3 EEPROM Information Print Pattern 2-30
7.4 Firmware Updating Function 2-31
7.4.1 How to update the Flash ROM
7.4.2 Cautions during the update
7.4.3 Errors during the download process
Part3㧦TECHNICAL REFERENCE
1. PRINTER CONTROL SECTION 3-1
1.1 Printing Data and Control Signal Flow
1.2 Printing Drive Control 3-2
1.3 Control During Printing
1.4 Detection Functions 3-3
1.4.1 Detection by sensors
1.4.2 Detection by others
2. PRINT HEAD 3-4
3. INK SUPPLY 3-5
4. ELECTRICAL PARTS 3-6
4.1 Block Diagram
4.2 Electrical Part
5. INTERFACE 3-7
5.1 IEEE1394
5.2 NIC Board
6. PRINTER’S MECHANICAL PARTS 3-8
6.1 Carriage Section
6.2 Purge Section
6.3 Paper Feed Section
7. CLEANING MODE AND INK SUCTION AMOUNT 3-9
iii
Page
Part4㧦APPENDIX
1. PRINT HEAD 4-1, 2
2. CONTROL BOARD CONNECTOR 4-3
Part 1
PRODUCT
SPECIFICATIONS
Otros manuales para imagePROGRAF W2200
2
Tabla de contenidos
Otros manuales de Impresora de Canon
Canon
Canon SELPHY CP810 Manual de usuario
Canon
Canon imagePROGRAF iPF6400S Series Guía del usuario
Canon
Canon MG5700 Series Manual de usuario
Canon
Canon iP2600 - PIXMA Color Inkjet Printer Manual
Canon
Canon iR2545i Manual de usuario
Canon
Canon iP4500 - PIXMA Color Inkjet Printer Manual
Canon
Canon imageCLASS LBP622Cdw Manual de usuario
Canon
Canon Color Bubble Jet BJC-8200 Manual de usuario
Canon
Canon PIXMA PRO-1 Series Manual de usuario
Canon
Canon LBP674Cx Manual de usuario
Canon
Canon PIXMA G4770 Manual de instrucciones
Canon
Canon imagePROGRAF SD-21 Manual de usuario
Canon
Canon PIXMA MX310 series Manual
Canon
Canon imageCLASS MF5950dw Instrucciones de montaje
Canon
Canon MultiPASS F30 Manual de usuario
Canon
Canon imagePROGRAF iPF8300S Guía del usuario
Canon
Canon PIXMA E560 Manual de usuario
Canon
Canon imageRUNNER 2545i Manual de usuario
Canon
Canon IMAGECLASS LBP6230DN Manual de usuario
Canon
Canon PIXMA TR4500 Series Manual de usuario
