Canon Card Reader-C1 Manual de usuario

REVISION 0

FY8-13H2-000

2001 CANON INC. 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)

Card Reader-C1

Card Reader-D1

JAN. 2001

2001 CANON INC. 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical

theory, installation, maintenance, and repair of products. This manual covers all localities

where the products are sold. For this reason, there may be information in this manual

that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to

improvements or changes in products. When changes occur in applicable products or in

the contents of this manual, Canon will release technical information as the need arises.

In the event of major changes in the contents of this manual over a long or short period,

Canon will issue a new edition of this manual.

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered

trademarks of the individual companies.

manual may not be copied, reproduced or translated into another language, in whole or in

part, without the written consent of Canon Inc.

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Printed in Japan

Imprimé au Japon

2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001

INTRODUCTION

1 Symbols Used

This documentation uses the following symbols to indicate special information:

Symbol Description

Indicates an item requiring care to avoid combustion (fire).

Indicates an item prohibiting disassembly to avoid electric shocks or problems.

Indicates an item requiring disconnection of the power plug from the electric

outlet.

Indicates an item intended to provide notes assisting the understanding of the

topic in question.

Memo

Indicates an item of reference assisting the understanding of the topic in ques-

tion.

REF.

Provides a description of a service mode.

Provides a description of the nature of an error indication.

Refers to the Copier Basics Series for a better understanding of the contents.

Indicates an item of a non-specific nature, possibly classified as Note, Caution,

or Warning.

Indicates an item requiring care to avoid electric shocks.

2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001

INTRODUCTION

2 Outline of the Manual

This Service Manual provides basic facts and figures need to service the Card Reader-C1/

D1 in the field, and consists of the following:

Chapter 1 Introduction outline, specifications, types of cards

Chapter 2 Electrical System outline of card detection

Chapter 3 Installation site requirements and installation procedure

Appendix general circuit diagram

The following rules apply throughout this Service Manual:

1. Each chapter contains sections explaining the purpose of specific functions and the

relationship between electrical and mechanical systems with reference to the timing

of operation.

In the diagrams, represents the path of mechanical drive; where a signal name

accompanies the symbol , the arrow indicates the direction of the electric sig-

nal.

The expression “turn on the power” means flipping on the power switch, closing the

front door, and closing the delivery unit door, which results in supplying the machine

with power.

2. In the digital circuits, ‘1’ is used to indicate that the voltage level of a given signal is

“High,” while ‘0’ is used to indicate “Low.” (The voltage value, however, differs from

circuit to circuit.) In addition, the asterisk (*) as in “DRMD*” indicates that the

DRMD signal goes on when ‘0’.

In practically all cases, the internal mechanisms of a microprocessor cannot be

checked in the field. Therefore, the operations of the microprocessors used in the ma-

chines are not discussed: they are explained in terms of from sensors to the input of

the DC controller PCB and from the output of the DC controller PCB to the loads.

The descriptions in this Service Manual are subject to change without notice for

product improvement or other purposes, and major changes will be communicated in

the form of Service Information bulletins.

All service persons are expected to have a good understanding of the contents of this

Service Manual and all relevant Service Information bulletins and be able to identify

and isolate faults in the machine.

2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001

iii

CONTENTS

1 Installation Procedure ......................... 3-1 2 Product Composition .......................... 3-1

CHAPTER 3 INSTALLATION

Contents

CHAPTER 1 INTRODUCTION

1 Outline ................................................ 2-1 2 Card Detention Circuit........................ 2-2

1 Outline ................................................ 1-1

2 Specifications ...................................... 1-2

2.1 Card Reader Unit ....................... 1-2

3 Names of Parts .................................... 1-3

3.1 Card Reader ............................... 1-3

4 Types of Cards .................................... 1-4

4.1 Group Card ................................ 1-4

4.2 Maintenance Card ...................... 1-5

CHAPTER 2 ELECTRICAL SYSTEM

1 General Circuit Diagram ................... A-1

APPENDIX

2001 CANON INC. CANON CARD READER-C1/D1 REV.0 JAN. 2001

CHAPTER 1

INTRODUCTION

2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001

CHAPTER 1 INTRODUCTION

1-1

1 Outline

A card reader is designed to read data stored on a plastic card (coded group No.) by an

optical or magnetic means to enable control of prints made by its host machine according to

group.

The PDL output may be controlled by setting IDs and ID Nos. (Each card is given a

unique ID, and ID Nos. are registered in user mode.)

A card reader may be either of the following two depending on how it may be installed:

• Card Reader-C1 (external installation type)

• Card Reader-D1 (built-in type)

Features

1. The output (number of prints) may be monitored in terms of individual groups and all

groups. In addition, setting a unit price will enable monitoring of expenses on an indi-

vidual or total basis.

2. A limit may be imposed on the number of prints that may be made by each group.

3. A specific group may be denied access.

4. A group whose output count is ‘0’ is skipped when statistics are collected, reducing the

work.

2001 CANON INC. 2000 2000 2000 2000 CANON CARD READER-C1/D1 REV.0 JAN. 2001

CHAPTER 1 INTRODUCTION

1-2

2 Specifications

2.1 Card Reader Unit

Item Description

Reading method By moving optical or magnetic mechanism

Maximum number of groups 200 groups (optical), 300 groups (magnetic)

The number of groups depends on the specifications of the host ma-

chine.

Upper limit by group Depends on host machine.

Unit price range 0.01 to 60.0

• If between 0.01 and 9.99, in increments of 0.01.

• If between 10.0 and 60.0, in increments of 0.1.

Minimum reading speed 3 cm/sec

Operating environment Temperature: +15 to +30°C

Humidity: 5% to 80%

Power supply 5 VDC (supplied by host machine)

Power consumption 0.5 W max.

Dimensions Card Reader-C1: 88 (W) ×100 (D) ×32 (H) mm

Card Reader-D1: 77 (D) ×85 (D) ×22 (H) mm

Weight Card Reader C1: 130 g

Card Reader-D1: 70 g

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de impresora de Canon

Canon

Canon AD1 Manual de usuario

Canon

Canon Paper Deck-V1 Manual de usuario

Canon

Canon imageFORMULA Flatbed Scanner Unit 102 Manual de usuario

Canon

Canon AS-AN11 Manual de usuario

Canon

Canon BJC-85 Manual de usuario

Canon

Canon BW PCL PRINTER KIT-J1 Manual de operación y mantenimiento

Canon

Canon Additional Finisher Tray-C1 Manual de operación y mantenimiento

Canon

Canon Inner Finisher Additional Tray-A1 Manual de operación y mantenimiento

Canon

Canon Stacker-C1 Manual de usuario

Canon

Canon Shift Tray-D1 Manual de usuario

Canon

Canon Finisher-Q1 Manual de usuario

Canon

Canon Super G3 FAX Board-T1 Manual de operación y mantenimiento

Canon

Canon imagePROGRAF RU-61 Manual de usuario

Canon

Canon imagePROGRAF RS-01 Manual de usuario

Canon

Canon Finisher-R1 Manual de servicio

Canon

Canon IPF600 Manual de usuario

Canon

Canon AG1 Manual de usuario

Canon

Canon imageRUNNER ADVANCE 6055 Manual de usuario

Canon

Canon Finisher-R1 Manual de servicio

Canon

Canon Super G3 3rd Line FAX Board-AE1 Manual de usuario

Canon

Canon CLI-521BK Manual de usuario

Canon

Canon DADF-M1 Manual de usuario

Canon

Canon Duplex Unit-A1 Manual de usuario

Canon

Canon Color iR Security Kit-A1P Manual de usuario

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Xerox

Xerox EFI EXP6000 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual

Citizen

Citizen CBM-202PC Series Manual de usuario

Codonics

Codonics Virtua 1VCX-LR833 Guía de referencia

TonerRefillKits

TonerRefillKits ReChargX RX126 Manual de usuario