Canon PIXMA MX892 Manual de usuario

<< Previous Next >>

Getting Your Multifunction

Back On Your Network

After A Router Or Network Change

PIXMA MX892

Windows OS

Important

If any of the following situations exist

•You have replaced your Router or Access Point

•You want to use a different wireless network

•Router settings have been changed.

Please complete the following steps to apply the new configuration settings to your multifunction.

<< Previous Next >>

Information

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Wireless Connection

Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that

configuration of the computer and access point or router is complete.

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of

the network device vary depending on your system environment. For details,

refer to your device's instruction manual or contact its manufacturer.

•In an office setup, consult your network administrator

•If you connect to a network that is not protected with security measures, there

is a risk of disclosing data such as your personal information to a third party.

•If an error message appears or if you have trouble with the network

connection, refer to the printed manual: Network Setup Troubleshooting.

•Place the machine and computer on the same network segment.

An "Ad-hoc connection," which establishes a direct wireless connection between

the computer and printer without using an access point, is not supported.

A router or access point is required for your printer to be used on a wireless

network.

Software Installation

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The

installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application

software to be installed.)

Installing the Drivers & Software

IMPORTANT

•Log on as the administrator (or a member of the Administrators group).

•Quit all running applications before installation.

•Do not switch users during the installation process.

•Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.

•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the

Setup CD-ROM during restarting. The installation resumes once your computer has restarted.

•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access

the network. If such a warning message appears, set the security software to always allow access.

<< Previous Next >>

Installing the PIXMA MX432 on Your Wireless Network

When you reinstall your printer on your network because of a router or network change, you follow the same procedure as for a first time

install. A step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA.

*Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.

*If you don’t have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file. Click here for information.

If the following screen appears, click Start Setup Again

Installing the Drivers & Software

<< Previous Next >>

Follow the on-screen instructions. When the Connection Method Selection screens (1-1 and 1-2) appear, be sure to select Network

Connection, then Wireless Connection.

Connecting to the Wireless Network

<< Previous Next >>

Continue to follow instructions until the Setup Procedure Selection screen (3-1) appears. This is shown on the next page

The printer automatically searches for access points that support WPS (Wi-Fi Protected Setup)*.

*Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the Stop

button on the printer’s operation panel and click on Other Methods on the Setup Procedure Selection screen (screenshot shown below)*.

If the Push Button Method is not shown on the printer’s operation panel(when no WPS access points have been detected), select Standard

setup on the printers operation panel, then click Other Methods on the Setup Procedure Selection screen

Connecting to the Wireless Network

<< Previous Next >>

If you selected the Push Button Method, follow any

remaining instructions to complete setup. Click here to skip

ahead.

If you selected Other Methods, please continue to the next

page for important information

Connecting to the Wireless Network

<< Previous Next >>

For Standard setup only

Select Standard setup on the Setup Procedure Selection screen (3-2)

Continue to next page before proceeding any further with setup

Connecting to the Wireless Network

<< Previous Next >>

Follow On-screen instructions. When you get to Step 4-2 and later in Step 4-4 ( screens shown below) you will need to know SSID and

password information*

Step 4-2 Step 4-4

*Unless you are absolutely certain of this information, please continue to the next page for information on locating /

verifying this information

Continue following on-screen instructions to complete network connection. The Software Installation List appears after

network setup is complete. Proceed to Software Installation List.

Otros manuales para PIXMA MX892

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon imageRUNNER ADVANCE 6275i Manual de usuario

Canon

Canon PIXMA MG5320 Series Manual de usuario

Canon

Canon PIXMA E474 Guía de configuración

Canon

Canon IMAGECLASS MF7400 Guía de seguridad

Canon

Canon PIXMA MP610 Series Manual de usuario

Canon

Canon IMAGERUNNER 2016 Manual de usuario

Canon

Canon imageRUNNER 1750iF Guía de seguridad

Canon

Canon PIXMA MP620 series Manual

Canon

Canon MultiPASS MP700 Manual de usuario

Canon

Canon MP980 series Manual de usuario

Canon

Canon FaxPhone L120 Guía de seguridad

Canon

Canon PIXMA MX495 Series Manual de usuario

Canon

Canon imageRUNNER 2206N Manual de usuario

Canon

Canon Perfect Binder A1 Manual de usuario

Canon

Canon PIXMA MX512 Manual de usuario

Canon

Canon PIXMA MX895 Manual de usuario

Canon

Canon C2620 Manual de usuario

Canon

Canon PIXMA MG5520 Manual de usuario

Canon

Canon PIXMA MP190 Manual de usuario

Canon

Canon imageCLASS MF269dw Manual de usuario

Canon

Canon PIXMA MX340 Series Manual de usuario

Canon

Canon imageRUNNER 1300 Series Manual de usuario

Canon

Canon PIXMA MG5320 Series Manual de usuario

Canon

Canon imageRUNNER 6000 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario