Canon PIXMA MG4220 Manual de usuario

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MG4220

Windows OS

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MG4220

Windows OS

Preparing to Connect Your Multifunction to the Network 3

Network Requirements 3

Notes on Wireless Connection 4

Installing the Drivers & Software 5

Preparing to Connect Your Multifunction

To the Network << Previous Next >>

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Wireless Connection

Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that

configuration of the computer and access point or router is complete.

Preparing to Connect Your Multifunction

To Your Network << Previous Next >>

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of

the network device vary depending on your system environment. For details,

refer to your device's instruction manual or contact its manufacturer.

•In an office setup, consult your network administrator

•If you connect to a network that is not protected with security measures, there

is a risk of disclosing data such as your personal information to a third party.

•Place the machine and computer on the same network segment.

An "Ad-hoc connection," which establishes a direct connection to the computer

over a wireless connection without using an access point, is not supported.

A wireless access point or router is required to use your printer on a wireless

LAN.

Software Installation

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The

installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application

software to be installed.)

Installing the Drivers & Software

IMPORTANT

•Log on as the administrator (or a member of the Administrators group).

•Quit all running applications before installation.

•Do not switch users during the installation process.

•Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.

•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the

Setup CD-ROM during restarting. The installation resumes once your computer has restarted.

•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access

the network. If such a warning message appears, set the security software to always allow access.

<< Previous Next >>

Installing the PIXMA MG4220 on Your Wireless Network

If you are installing your printer on your network for the first time, a step-by-step walk through of the wireless setup is built in to the installation

routine of the software that shipped with your PIXMA.

Insert the Setup CD-ROM * that came with your printer into your CD-ROM drive and proceed through the easy to follow on-screen instructions.

Be sure to select Wireless Connection on the Connection Method Selection screen (1-1).

Connecting to the Wireless Network

<< Previous Next >>

Continue to follow instructions until the Setup Procedure Selection screen (3-1)appears. This is shown on the next page

* If you do not have the Setup CD-ROM you can still Install the printer using the download file available on our web site. Click Here for

information.

The printer automatically searches for access points that support WPS (Wi-Fi Protected Setup)*.

*Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the Stop

button on the printer’s operation panel and click on Other Methods on the Setup Procedure Selection screen (screenshot shown below).

If the Push Button Method is not shown on the printer’s operation panel(when no WPS access points have been detected), select Standard

setup on the printers operation panel, then click Other Methods on the Setup Procedure Selection screen

Connecting to the Wireless Network

<< Previous Next >>

If you selected the Push Button Method, follow any

remaining instructions to complete setup. Skip ahead to

instructions

If you selected Other Methods, please continue to the next

page for important information

Connecting to the Wireless Network

<< Previous Next >>

For Standard setup only

Select Standard setup on the Setup Procedure Selection screen (3-2)

Continue to next page before proceeding any further with setup

Connecting to the Wireless Network

<< Previous Next >>

Follow On-screen instructions. When you get to Step 4-2 and later in Step 4-4 ( screens shown below) you will need to know Access Point and

password information*

Step 4-2 Step 4-4

*Unless you are absolutely certain of this information, please continue to the next page for information on locating /

verifying this information. After confirming this information, use the information to complete steps 4-2 through 4-4.

Continue to follow the on-screen instructions.

Connecting to the Wireless Network

<< Previous Next >>

If you don't know your Access Point / Router name or SSID*, or the Passphrase or Network key for your wireless network, you can find this

information during Standard setup using the Setup CD-ROM or the downloaded files (Mini Master Setup or Master Setup).

*The terms 'SSID' and 'AccessPoint / Router' refer to a name used to identify the specific Access Point or Router. "Passphrase' and 'Network

Key' refer to a password required to prevent unauthorized access to communication.

Look for the Confirm the access point name or the Confirm the network key (automatic display) buttons during the setup procedure.

Clicking either of these buttons will give the needed information. See example below of the Wireless Lan Setup Information window.

(appearance varies depending on Operating System). Use the provided information when selecting the Access Point / Router and for

entering the Network Key.

Return to previous steps.

Otros manuales para PIXMA MG4220

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon ImageRunner iR8500 Series Manual de usuario

Canon

Canon PIXMA MG3150 Manual de usuario

Canon

Canon G2000 series Guía de configuración

Canon

Canon MF7280 - ImageCLASS B/W Laser Manual de usuario

Canon

Canon 2711B019AB Instrucciones de montaje

Canon

Canon imageRUNNER 5075 Manual de usuario

Canon

Canon 2184B002 Manual de usuario

Canon

Canon LASERBASE MF3110 Manual de usuario

Canon

Canon PIXMA MX922 Manual de usuario

Canon

Canon MX390 series Guía de configuración

Canon

Canon FaxPhone L120 Guía de configuración

Canon

Canon imagePRESS C800 Series Manual de usuario

Canon

Canon C4580 Series Manual de usuario

Canon

Canon FAX-L380 Manual de usuario

Canon

Canon PIXMA MP520 Manual de instrucciones

Canon

Canon E 400 Guía de configuración

Canon

Canon mg6400 series Guía de configuración

Canon

Canon imageRUNNER 2545i Manual de usuario

Canon

Canon PIXMA MP180 Manual de usuario

Canon

Canon MX520 series Guía de configuración

Canon

Canon imageRUNNER 7200 Manual de usuario

Canon

Canon imageRUNNER ADVANCE C350iF Guía de seguridad

Canon

Canon PIXMA MX522 Manual de usuario

Canon

Canon imagerunner advance 8205 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario