Canon PIXMA MG3220 series Manual de usuario

PIXMA MG3200

Setup Guide

series

Setup Guide

This guide provides information for setting up a network connection for the printer.

Network Connection

Wireless Connection

Preparation for Connection

Printer Setup

Connection Using WPS

Troubleshooting

Network Connection

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the LED (Light Emitting Diode) is lit as shown in the illustration below.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For ofﬁ ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

bPrinter Setup

1. Press and hold the Maintenance button (A) on the printer (for about 5 seconds).

2. Make sure that the LED ﬂ ashes as shown in the illustration below.

•

cConnection Using WPS

1. Press the Fit to Page button (A).

2. Make sure that the LED ﬂ ashes as shown in the illustration above, then press and hold the WPS

button on the access point within 2 minutes.

For details on pressing the WPS button, refer to the access point manual.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

3. When wireless connection is complete, the LED lights up for about 3 seconds, then changes to "1" as

shown in the left illustration below. Make sure that the (blue) Wi-Fi lamp on the printer is lit.

The network connection setup is now complete.

Troubleshooting

WPS

E > 2 > 1

The error appears when wireless connection setup was not completed within 2 minutes after pressing the WPS

button.

Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back

on.

E > 2 > 3

The screen appears when multiple access points are detected. Wait for a while, then conﬁ gure WPS settings again.

Press the WPS button on only one access point.

E > 2 > 4

The screen appears when an error occurs.

Check the access point settings, then conﬁ gure WPS settings again.

For details on how to check the settings of the access point, refer to the manual supplied with the access point or

contact its manufacturer.

To conﬁ gure WPS settings again

1. Press the Color button (A).

2. Press and hold the Maintenance button on the printer (for about 5 seconds).

3. Make sure that the LED ﬂ ashes as shown in the illustration above.



•



Otros manuales para PIXMA MG3220 series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Canon

Canon

Canon PIXMA MX700 Series Manual

Canon

Canon imagePRESS C850 Manual de instrucciones

Canon

Canon Color imageCLASS MF8050Cn Guía de seguridad

Canon

Canon imageRUNNER 8500 Manual de usuario

Canon

Canon PIXMA MG7500 Series Guía de configuración

Canon

Canon C3100 Series Manual de usuario

Canon

Canon LASERBASE MF5700 Series Manual de usuario

Canon

Canon iR3530 Manual de usuario

Canon

Canon CLC 5000 Manual de usuario

Canon

Canon ColorPASS-GX400 Instrucciones de instalación y mantenimiento

Canon

Canon imageRUNNER Advance C2030i Instrucciones de montaje

Canon

Canon Pixma MP800R Manual de usuario

Canon

Canon ImageCLASS MF5730 Manual

Canon

Canon imageRUNNER ADVANCE 8085 Manual de funcionamiento

Canon

Canon MAXIFY iB4040 Manual de usuario

Canon

Canon PIXMA MP190 Manual de usuario

Canon

Canon imageCLASS MF269dw Manual de usuario

Canon

Canon mg6400 series Guía de configuración

Canon

Canon SmartBase PC1200s Manual de usuario

Canon

Canon 3300 Series Manual de usuario

Canon

Canon MG5200 series Manual de usuario

Canon

Canon imageCLASS MF4450 Instrucciones de montaje

Canon

Canon imageRunner 60 Manual de usuario

Canon

Canon IR5000 - iR B/W Laser Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario